Package: installation-reports INSTALL REPORT
Debian-installer-version: official mirror (gd.tuwien.ac.at) uname -a:Linux aptiva 2.6.6-1-686 #1 Wed May 12 14:57:57 EST 2004 i686 GNU/Linux Date: 2004-06-30 18:46 Method: Downloaded Sarge Beta 4, 110 Mbytes ISO image Machine: IBM Aptiva Processor: Celeron 433 MHz Memory: 192M Root Device: /dev/hda Root Size/partition table: /dev/hda5 on / type unknown (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/hda1 on /boot type ext3 (rw) /dev/hda3 on /var/log type ext3 (rw) usbfs on /proc/bus/usb type usbfs (rw) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03) 0000:00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) 0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) 0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) 0000:01:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:00.0 Class 0600: 8086:7120 (rev 03) 0000:00:01.0 Class 0300: 8086:7121 (rev 03) 0000:00:1e.0 Class 0604: 8086:2418 (rev 02) 0000:00:1f.0 Class 0601: 8086:2410 (rev 02) 0000:00:1f.1 Class 0101: 8086:2411 (rev 02) 0000:00:1f.2 Class 0c03: 8086:2412 (rev 02) 0000:01:04.0 Class 0200: 10b7:9055 (rev 30) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: user interface for LVM and partitioning confusing, I prefer manual partitioning LVM on root (/) not supported. Please cater for a separate /var/log partition in the default partition schema! Get over kernel 2.4.* and install 2.6.* I would suggest... (I know there are problems on misc architectures) WISHLIST: SW-RAID within Installer, on root (/) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]