Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso (pre-rc2 downloaded the 10/17/04) uname -a: Linux sarge 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux Date: 10/17/04 at 10:36 pm Method: standard installation (linux) from burned iso image (netinst CD image, with Debian base) Proxied?> no proxy
Machine: Custom server (I440LX motherboard) Processor: Dual-Pentium II 300 Mhz Memory: 256 Mo Root Device: SCSI IBM drive 9.1 GB 1000rpm Root Size/partition table: Disk Drive: /dev/sdb Size: 9173114880 bytes, 9173 MB Heads: 255 Sectors per Track: 63 Cylinders: 1115 Name Flags Part Type FS Type [Label] Size (MB) sdb1 Primary Linux ext3 [/] 296,12 sdb2 Primary Linux swap 764,96 sdb3 Primary Linux ext3 [/boot] 24,68 sdb5 Logical Linux ext3 [/tmp] 1003,49 sdb6 Logical Linux ext3 [/var] 1003,49 sdb7 Logical Linux ext3 [/usr] 3997,49 sdb8 Logical Linux ext3 [/home] 2081,00 <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/sdb1 / ext3 defaults,errors=remount-ro 0 1 /dev/sdb3 /boot ext3 defaults 0 2 /dev/sdb8 /home ext3 noatime 0 2 /dev/sdb5 /tmp ext3 noatime 0 2 /dev/sdb7 /usr ext3 noatime 0 2 /dev/sdb6 /var ext3 noatime 0 2 /dev/sdb2 none swap sw 0 0 /dev/scd0 /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/scd1 /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) 0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 0000:00:09.0 Display controller: Texas Instruments TVP4020 [Permedia 2] (rev 01) 0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 30) 0000:00:00.0 0600: 8086:7190 (rev 02) 0000:00:01.0 0604: 8086:7191 (rev 02) 0000:00:04.0 0601: 8086:7110 (rev 02) 0000:00:04.1 0101: 8086:7111 (rev 01) 0000:00:04.2 0c03: 8086:7112 (rev 01) 0000:00:04.3 0680: 8086:7113 (rev 02) 0000:00:06.0 0100: 9005:001f 0000:00:09.0 0380: 104c:3d07 (rev 01) 0000:00:0b.0 0200: 10b7:9200 (rev 30) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: No problems observed during install and after reboot. All working done ! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]