* Frans Pop <[EMAIL PROTECTED]> [20060815 14:11]:
> On Tuesday 15 August 2006 11:01, Thomas Arendsen Hein wrote:
> > Here the exact steps until the problem showed up:
>
> Thank you for this clear description. I have seen something similar on a
> hppa box. It would p
* Joey Hess <[EMAIL PROTECTED]> [20060814 23:14]:
> Thomas Arendsen Hein wrote:
> > I booted d-i etch beta3 (full CD, x86) in "expert" mode.
> > The system has two S-ATA disks (sda and sdb).
> >
> > When playing around with the installer I deleted two
Package: debian-installer
Severity: minor
With debian-installer etch beta3 I got the following dialog:
| The following partitions are going to be formatted:
|partition #1 of LVM VG vg-raid0, LV tmp as xfs
|partition #1 of LVM VG vg-raid1, LV home as xfs
|partition #1 of LVM VG vg-raid
Package: debian-installer
Severity: minor
With debian-installer etch beta3 (full CD, x86) I wanted to setup two
encrypted swap partitions. To be able to copy&paste error message to bug
reports I used serial console in the beginning and then switched to network
ssh console.
For both partitions the
I just had the same problem again, so here is the important part
of the error message:
Error informing the kernel about modifications to partition
/dev/md/0p1. This means ... blah blah.
ERROR!
[Ignore]
[Cancel]
Pressing [Cancel] shows another error message:
The kernel was unable to re-rea
Package: debian-installer
Severity: normal
Using debian-installer etch beta-3 (full CD, x86) in "expert" mode:
In task selection I selected only "Standard Install", additionally to
the CD I added apt-proxy: with path /debian/ as install source
(using the d-i menus).
On package 95 of 102 (rep
Package: debian-installer
Severity: normal
I booted d-i etch beta3 (full CD, x86) in "expert" mode.
The system has two S-ATA disks (sda and sdb).
When playing around with the installer I deleted two existing RAID
partitions and recreated them. d-i detected existing data (a LVM pv)
on the RAID par
Package: debian-installer
Version: N/A; reported 2004-02-24
Severity: wishlist
When booting from CD you don't have enough time to read about the
boot options 'install', 'install-safe', 'expert' and 'expert-safe'.
Of course you can press a key to stop booting the default entry, but
maybe this shou
Package: debian-installer
Version: d-i beta2 on powerpc
Severity: normal
Automatic partition doesn't create the 800K boot partition, so there
is an error message after the base install.
When returning to manual configuration, you can't edit partitions,
because the automatic partitioner uses parte
Package: debian-installer
Version: N/A; reported 2004-02-24
Severity: wishlist
http://d-i.alioth.debian.org/cvs/debian-installer/doc/INSTALLATION-HOWTO
doesn't mention how to make your system boot from CD, it just says:
"... and make your system boot from CD."
For powerpc it should say something
Package: debian-installer
Version: N/A; reported 2004-02-24
Severity: important
Installation using sarge-powerpc-netinst.iso downloaded from
http://gluck.debian.org/cdimage/testing/sid_d-i/powerpc/20040223/
can't start kbd-chooser.
When starting kbd-chooser on the command line on tty2 and proceed
On Fri, Feb 13, 2004 at 11:50:23AM +0100, Thomas Arendsen Hein wrote:
> On Thu, Feb 12, 2004 at 04:53:20PM -0500, Joey Hess wrote:
> > The important directory is /target/cdrom/, which should be a bind mount
> > to /cdrom. This is probably a version skew problem, and will probably be
On Thu, Feb 12, 2004 at 04:53:20PM -0500, Joey Hess wrote:
> Thomas Arendsen Hein wrote:
> > Err copy: sarge/main kernel-image-2.4.22-powerpc 2.4.22-1.1
> > Failed to stat - stat (2 No such file or directory)
> > Failed to fetch
> > copy:///cdrom/pool/main/k/kernel-
It seems as if the "apt-get update" on the fresh system installed
via debootstrap works, but not the apt-get install.
Thomas
--
Email: [EMAIL PROTECTED]
http://intevation.de/~thomas/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECT
Package: debian-installer
Version: 20040208 reported 2004-02-12
Severity: normal
Installation using sarge-powerpc-netinst.iso downloaded from
http://gluck.debian.org/cdimage/testing/sid_d-i/netinst/powerpc/20040208/
aborts with an error on tty3:
The following NEW packages will be installed:
ker
Package: debian-installer
Version: 20040126 reported 2004-01-28
Severity: normal
Installation using sarge-powerpc-netinst.iso downloaded from
http://gluck.debian.org/cdimage/testing/sid_d-i/netinst/powerpc/20040126/
aborts with a debootstrap error on tty3:
/usr/sbin/debootstrap: 1: sleep: not foun
Package: debian-installer
Version: 20040126; reported 2004-01-28
Severity: minor
The main menu of sarge-powerpc-netinst.iso downloaded from
http://gluck.debian.org/cdimage/testing/sid_d-i/netinst/powerpc/20040126/
contains an untranslated entry "Automatically partition hard drives"
within an other
Package: debian-installer
Version: 20040126; reported 2004-01-28
Severity: normal
After booting the kernel of sarge-powerpc-netinst.iso downloaded from
http://gluck.debian.org/cdimage/testing/sid_d-i/netinst/powerpc/20040126/
the sound of the Macintosh PowerBook G3 Lombard seems to be turned
on wi
18 matches
Mail list logo