Package: installation-reports INSTALL REPORT
Debian-installer-version: beta4 uname -a: Linux qubebob 2.4.25-r5k-cobalt #1 Thu Apr 15 15:17:00 BST 2004 mips GNU/Linux Date: Sat, 08 May 2004 18:26:20 -0700 Method: Netboot as described in Martin Michlmayr <[EMAIL PROTECTED]>'s May 6th email to debian-mips. So, nfs/tftp netboot from my x86, then network install through a squid cache on said x86. Machine: Cobalt Cube 2 Processor: Nevada V10.0 FPU V10.0 Memory: 48M Root Device: /dev/hda3 Root Size/partition table: Disk /dev/hda: 6448 MB, 6448619520 bytes 15 heads, 63 sectors/track, 13328 cylinders Units = cylinders of 945 * 512 = 483840 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 21 9891 83 Linux /dev/hda2 22 286 125212+ 82 Linux swap /dev/hda3 287 13328 6162345 83 Linux I left the partitions intact from my old, broken, sid install. I had d-i leave the /boot partition alone too, just to make sure it was in a form the firmware could handle. Output of lspci and lspci -n: 0000:00:00.0 Memory controller: Marvell: Unknown device 4146 (rev 11) 0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/4) 0000:00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo) 0000:00:09.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8) 0000:00:09.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Cont) 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/4) 0000:00:00.0 Class 0580: 11ab:4146 (rev 11) 0000:00:07.0 Class 0200: 1011:0019 (rev 41) 0000:00:09.0 Class 0601: 1106:0586 (rev 27) 0000:00:09.1 Class 0101: 1106:0571 (rev 06) 0000:00:09.2 Class 0c03: 1106:3038 (rev 02) 0000:00:0c.0 Class 0200: 1011:0019 (rev 41) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: The install went really smoothly once I got the netboot setup properly. One thing that might be neat is to update the LCD with install progress, but it's not important and of debatable usefullness. A cdebconf frontend that only uses the LCD and buttons would be nifty too and maybe even useable, but probably not. Many thanks to Martin Michlmay (tbm) for making it work on the old Cobalt equipment. He's my hero. - Nick Lopez [EMAIL PROTECTED] -- Randomly selected signature -- "Yes, but they're sand monkeys!" - Cartman -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]