"lspci" is unavailable. I looked for it on the ramdisk and on the cdrom
(which was mounted already) but I guess it gets installed later... after
the hard drive is detected.
I did write down the message that came up during hardware detection though.
It said: "Unable to load some modules." Missin
Quoting Olek Wojnar ([EMAIL PROTECTED]):
> Here's a link to the Promise driver source I mentioned earlier:
> http://www.promise.com/support/download/download2_eng.asp?productId=98&category=driver&os=4
>
> Not sure if that will help.
>
> Any other ideas?
Can you send the output of lspci -v ?
No-go on that one either. I used the 21 June image. In expert mode, it
said something about needing an IDE to RAID adapter driver or something
like that.
Here's a link to the Promise driver source I mentioned earlier:
http://www.promise.com/support/download/download2_eng.asp?productId=98&catego
> Installer could not detect the SATA hard drive that was connected through
> a Promise SATA150 TX4 PCI interface card (non-RAID). At the partitioning
> step, no hard drives were available. Still working on a way to get Debian
> to see my drive... Promise provides driver source code but my old dri
Package: installation-reports
Debian-installer-version: Test Candidate 1, downloaded 10 June 2004
uname -a: N/A
Date: 10 June 2004 8pm
Method: Installed from bootable CD made from iso
Machine: Old custom-built system
Processor: Cyrix 6x86 200+
Memory: 64 Mb
Root Device: Maxtor SATA 200Gb HD
R
5 matches
Mail list logo
