Package: installation-reports INSTALL REPORT
Debian-installer-version: 18.07.04 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-businesscard.iso uname -a: not possible, Date: 18.07.04 Method: Installation over sarge businesscard tc1,CD-Rom, downloading from ftp.de.debian.org,no proxy machine: amd k6-2 500mhz Processor: amd k6-2 500mhz Memory: 256mb-ram Root Device: IDE Root Size/partition table: /dev/hdb1 487M 133M 328M 29% /mnt/hdb1 one partition no swap ext2 Output of lspci and lspci -n: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02) 00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) 00:12.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 256 (rev 10) lspci -n: 00:00.0 Class 0600: 1106:0598 (rev 04) 00:01.0 Class 0604: 1106:8598 00:07.0 Class 0601: 1106:0586 (rev 47) 00:07.1 Class 0101: 1106:0571 (rev 06) 00:07.2 Class 0c03: 1106:3038 (rev 02) 00:07.3 Class 0600: 1106:3040 (rev 10) 00:12.0 Class 0200: 10b7:9055 (rev 30) 01:00.0 Class 0300: 10de:0100 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] Comments/Problems: Before this, I installed tc1 on the same machine on a 20gb-harddrive without any problems. After that I removed this harddrive and plugged an old 500mb-harddrive on ide0 slave. Masterdrive is not present. CD-drive is on ide1 master. After finishing the installation, it reboots, but reboots after pressing enter during the grub menu. Same next reboot. I filled out these log, by using knoppix. ____________________________________________________ Aufnehmen, abschicken, nah sein - So einfach ist WEB.DE Video-Mail: http://freemail.web.de/?mc=021200 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]