Package: installation-reports Debian-installer-version: Sarge RC1 20040806 netinstall CD for SPARC from http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/sparc/rc1/sarge-sparc-netinst.iso uname -a: N/A, didn't get that far Date: 20040808, 10pm CST Method: Burned the iso, booted with "boot cdrom" command to OpenBoot, kernel panic while loading installer kernel (see below for details)
Machine: Sun Blade 100 workstation (sun4u/sparc64) Processor: 500MHz UltraSPARC-IIe Memory: 512MB (4x128MB) Root Device: I didn't get far enough to choose one, but there are 2 IDE drives in the system. c0t0d0 is a Seagate ST315310A 15.3GB IDE drive; c0t2d0 is a Quantum Fireball AS40.0 40GB IDE drive (this is the one I would have chosen). Root Size/partition table: N/A, didn't get that far Output of lspci: N/A, didn't get that far Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Burnt CD (md5sums checked out), booted it with OpenBoot "boot cdrom". Pressed "Enter" for standard install. Installer starts booting kernel, but then has kernel panic. I got farther along in the install process using the tftp boot image than I did with this netinstall CD, so other installation reports for this machine will follow. Incidentally, when using a serial console with Minicom, the installer's SILO seemed unable to see my keyboard (US standard PS/2 attached to x86 machine running Debian unstable). After a few seconds it would boot the install kernel anyway, but this would prevent me from giving any boot arguments (or even typing "help") in this way. I don't know whether this is considered a but or just obnoxious, but I thought I should mention it. Output of installer process captured via serial console: Sun Blade 100 (UltraSPARC-IIe), No Keyboard OpenBoot 4.0, 512 MB memory installed, Serial #XXXXXXXX. Ethernet address 0:3:ba:c:d8:6e, Host ID: 830cd86e. < snipped bit about initializing memory > SILO Version 1.4.8 \ Welcome to Debian GNU/Linux sarge! This is a Debian installation CDROM, built on 20040806. Keep it once you have installed your system, as you can boot from it to repair the system on your hard disk if that ever becomes necessary. WARNING: You should completely back up all of your hard disks before proceeding. The installation procedure can completely and irreversibly erase them! If you haven't made backups yet, remove the rescue CD from the drive and press L1-A to get back to the OpenBoot prompt. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ ENTER - Boot install ] [ Type "rescue" - Boot into rescue mode ] boot: Loaded kernel version 2.4.26 Loading initial ramdisk (1875516 bytes at 0x67802000 phys, 0x40C00000 virt)... < snipped several lines of -\|/ > Remapping the kernel... Booting Linux... PROMLIB: Sun IEEE Boot Prom 4.0.45 2001/02/08 14:33 Linux version 2.4.26-sparc64 ([EMAIL PROTECTED]) (gcc version 3.3.3 (Debian 20040321)) #1 Fri Jun 18 02:04:50 PDT 2004 ARCH: SUN4U Ethernet address: 00:03:ba:0c:d8:6e On node 0 totalpages: 64647 zone(0): 212879 pages. zone(1): 0 pages. zone(2): 0 pages. Found CPU 0 (node=f006dbd4,mid=0) Found 1 CPU prom device tree node(s). Kernel command line: root=/dev/rd/0 cdrom devfs=mount rw Calibrating delay loop... 1002.70 BogoMIPS Memory: 497160k available (2592k kernel code, 608k data, 184k init) [fffff80000000000,0000000067f1e000] Dentry cache hash table entries: 65536 (order: 7, 1048576 bytes) Inode cache hash table entries: 32768 (order: 6, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 8192 bytes) Buffer cache hash table entries: 32768 (order: 5, 262144 bytes) Page-cache hash table entries: 65536 (order: 6, 524288 bytes) POSIX conformance testing by UNIFIX PCI: Probing for controllers. PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20 SABRE: Shared PCI config space at 000001fe01000000 SABRE: DVMA at c0000000 [20000000] PCI-IRQ: Routing bus[ 0] slot[ 8] map[0] to INO[23] PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06] PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[1c] PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[24] PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c] PCI-IRQ: Routing bus[ 0] slot[13] map[0] to INO[0f] PCI0(PBMA): Bus running at 33MHz isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial] ebus0: [flashprom] [eeprom] [idprom] PCIO serial driver version 1.54 su(serial) at 0x1fe020003f8 (tty 0 irq 12,7eb) is a 16550A su(serial) at 0x1fe020002e8 (tty 1 irq 12,7eb) is a 16550A Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded alloc_area_pte: page already exists alloc_area_pte: page already exists alloc_area_pte: page already exists alloc_area_pte: page already exists alloc_area_pte: page already exists alloc_area_pte: page already exists devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured rtc_init: no PC rtc found RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) sungem.c:v0.97 3/20/02 David S. Miller ([EMAIL PROTECTED]) eth%d: MII PHY ID: 437420 Enable Semiconductor eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:0c:d8:6e Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:0d.0 ALI15X3: chipset revision 195 ALI15X3: 100% native mode on irq 4,7cc ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f, BIOS settings: hdc:pio, hdd:pio hda: ST315310A, ATA DISK drive hdb: LTN486S, ATAPI CD/DVD-ROM drive ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hdc: QUANTUM FIREBALLP AS40.0, ATA DISK drive ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 4,7cc ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 4,7cc hda: attached ide-disk driver. hda: 29888820 sectors (15303 MB) w/2048KiB Cache, CHS=29651/16/63, UDMA(66) hdc: attached ide-disk driver. hdc: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(33) hdb: attached ide-cdrom driver. hdb: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p8 /dev/ide/host0/bus1/target0/lun0: p2 p3 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/usb-uhci.c: $Revision: 1.275 $ time 02:06:04 Jun 18 2004 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver host/usb-ohci.c: USB OHCI at membase 0x1ff02000000, IRQ 9,7e4 host/usb-ohci.c: usb-00:0c.3, PCI device 108e:1103 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver usbkbd usbkbd.c: :USB HID Boot Protocol keyboard driver mice: PS/2 mouse device common for all mice Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 65536 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Couldn't find valid RAM disk image starting at 0. Freeing initrd memory: 1831k freed cramfs: wrong magic sh-2021: reiserfs_read_super: can not find reiserfs on ramdisk(1,0) Kernel panic: VFS: Unable to mount root fs on 00:00 Press L1-A to return to the boot prom