Package: installation-reports INSTALL REPORT
Debian-installer-version: 2004-04-29 from www.debian.org uname -a: Linux kwak 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux Date: Aug 26 2004 Method: network install, no proxy, from a local network connected via a Linux box Machine: Dell Latitude D800 Processor: Pentium M 1.60 GHz / 600MHz Memory: 512MB Root Device: IDE 40GB IC25N040ARC805-0 Root Size/partition table: Disk /dev/hda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 5 40131 de Dell Utility /dev/hda2 6 2299 18426555 17 Hidden HPFS/NTFS /dev/hda3 2300 4864 20603362+ f W95 Ext'd (LBA) /dev/hda5 2300 2440 1132551 c W95 FAT32 (LBA) /dev/hda6 2441 2506 530113+ 82 Linux swap /dev/hda7 3004 4864 14948451 83 Linux .... /home ext3 /dev/hda8 2507 3003 3992121 83 Linux .... / reiserfs Output of lspci and lspci -n: kwak:~# lspci 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 Go AGP 8x] (rev a1) 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) 0000:02:01.0 CardBus bridge: Texas Instruments: Unknown device ac47 (rev 01) 0000:02:01.1 CardBus bridge: Texas Instruments: Unknown device ac4a (rev 01) 0000:02:01.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 802b 0000:02:01.3 System peripheral: Texas Instruments: Unknown device 8204 0000:02:03.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) kwak:~# kwak:~# lspci -n 0000:00:00.0 0600: 8086:3340 (rev 03) 0000:00:01.0 0604: 8086:3341 (rev 03) 0000:00:1d.0 0c03: 8086:24c2 (rev 01) 0000:00:1d.1 0c03: 8086:24c4 (rev 01) 0000:00:1d.2 0c03: 8086:24c7 (rev 01) 0000:00:1d.7 0c03: 8086:24cd (rev 01) 0000:00:1e.0 0604: 8086:2448 (rev 81) 0000:00:1f.0 0601: 8086:24cc (rev 01) 0000:00:1f.1 0101: 8086:24ca (rev 01) 0000:00:1f.5 0401: 8086:24c5 (rev 01) 0000:00:1f.6 0703: 8086:24c6 (rev 01) 0000:01:00.0 0300: 10de:0286 (rev a1) 0000:02:00.0 0200: 14e4:165d (rev 01) 0000:02:01.0 0607: 104c:ac47 (rev 01) 0000:02:01.1 0607: 104c:ac4a (rev 01) 0000:02:01.2 0c00: 104c:802b 0000:02:01.3 0880: 104c:8204 0000:02:03.0 0280: 8086:1043 (rev 04) kwak:~# Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [ ] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [ ] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: * I entered fixed IP configuration for my local network and IPs for name servers during installation but IP addresses of nameservers were not written into /etc/resolv.conf afterwards. I think this is rather confusing for somebody who is not familiar with networking. * I am accustomed to LILO and not to GRUB and when GRUB configuration started I couldn't see how to select LILO (I would prefer if I could choose explicitly and not to return from GRUB back to to the main installation menu) * after successful download of Debian packages when configuring pcmcia-cs package I used the option 'ask' and then the installation halted. I had to switch the NB off and after restart and new download of packages the installation finished without a problem. I used the same installation CD for a Fujitsu Notebook without any problems * I failed to install the system with kernel 2.6 on my NB Ales -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]