Package: installation-reports Version: 2.23 Severity: normal
-- Package-specific info: Boot method: Network Image version: Daily build netboot of 2007/02/10 Date: 2007/02/10 12h30 Machine: HP Workstation 712/60 Partitions: Disk /dev/sda: 1050 MB, 1050347520 bytes 255 heads, 63 sectors/track, 127 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ f0 Linux/PA-RISC boot /dev/sda2 5 14 80325 83 Linux /dev/sda3 15 127 907672+ 5 Extended /dev/sda5 * 15 114 803218+ 83 Linux /dev/sda6 115 127 104391 82 Linux swap / Solaris Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [E] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: I did not get an error during setup, but after the first boot, the date was somewhere in 2034. I manually installed ntpdate and ran it to correct the date/time. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="4.0 (installer build 20070210-07:41)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux parisc-712 2.6.18-4-parisc #1 Fri Feb 2 07:40:27 MST 2007 parisc unknown lsmod: Module Size Used by lsmod: ext3 169032 1 lsmod: jbd 70664 1 ext3 lsmod: zalon7xx 36460 0 lsmod: sd_mod 24112 4 lsmod: lasi700 3840 3 lsmod: 53c700 34696 1 lasi700 lsmod: scsi_transport_spi 32160 2 zalon7xx,53c700 lsmod: scsi_mod 161296 5 zalon7xx,sd_mod,lasi700,53c700,scsi_transport_spi lsmod: isofs 41624 0 lsmod: ide_cd 48260 0 lsmod: cdrom 43804 1 ide_cd lsmod: ide_disk 20672 0 lsmod: ide_generic 1216 0 [permanent] lsmod: cmd64x 13404 0 [permanent] lsmod: ns87415 5860 0 [permanent] lsmod: ide_core 134028 5 ide_cd,ide_disk,ide_generic,cmd64x,ns87415 lsmod: lasi_82596 27860 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 30824 412 30412 1% /dev df: tmpfs 30824 412 30412 1% /dev df: tmpfs 30824 412 30412 1% /.dev df: /dev/scsi/host0/bus0/target6/lun0/part5 790556 440612 309784 59% /target df: /dev/scsi/host0/bus0/target6/lun0/part2 75272 9690 61566 14% /target/boot free: total used free shared buffers free: Mem: 61648 58024 3624 0 5812 free: Swap: 104380 3576 100804 free: Total: 166028 61600 104428 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: cpu family : PA-RISC 1.1d /proc/cpuinfo: cpu : PA7100LC (PCX-L) /proc/cpuinfo: cpu MHz : 60.000000 /proc/cpuinfo: model : 9000/712 /proc/cpuinfo: model name : Gecko (712/60) /proc/cpuinfo: hversion : 0x00006000 /proc/cpuinfo: sversion : 0x00000481 /proc/cpuinfo: I-cache : 32 KB /proc/cpuinfo: D-cache : 32 KB (WB, direct mapped) /proc/cpuinfo: ITLB entries : 64 /proc/cpuinfo: DTLB entries : 64 - shared with ITLB /proc/cpuinfo: BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) /proc/cpuinfo: BTLB fix-entr. : 0 instruction, 0 data (8 combined) /proc/cpuinfo: BTLB var-entr. : 0 instruction, 0 data (0 combined) /proc/cpuinfo: bogomips : 59.26 /proc/cpuinfo: software id : 2004331096 /proc/cpuinfo: /proc/iomem: 00000000-03ffffff : System RAM /proc/iomem: 00000000-000009ff : PDC data (Page Zero) /proc/iomem: 00100000-00348fff : Kernel code /proc/iomem: 00349000-0045dfff : Kernel data /proc/iomem: f0100000-f0100fff : 2 /proc/iomem: f0102000-f0102fff : 2:0:6 /proc/iomem: f0104000-f0104fff : 2:0:8 /proc/iomem: f0105000-f0105fff : 2:0:4 /proc/iomem: f0105800-f0105807 : serial /proc/iomem: f0106000-f0106fff : 2:0:1 /proc/iomem: f0107000-f0107fff : 2:0:2 /proc/iomem: f0108000-f0108fff : 2:0:11 /proc/iomem: f010a000-f010afff : 2:0:10 /proc/iomem: f8000000-fbffffff : 1 /proc/iomem: f8100000-f84fffff : stifb mmio /proc/iomem: f9000000-f912bfff : stifb fb /proc/iomem: fff80000-fffaffff : Central Bus /proc/iomem: fffb0000-fffdffff : Local Broadcast /proc/iomem: fffbe000-fffbefff : 8 /proc/iomem: fffbf000-fffbffff : 9 /proc/iomem: fffe0000-ffffffff : Global Broadcast /proc/interrupts: CPU0 /proc/interrupts: 16: 400704 GSC-ASIC lasi700 /proc/interrupts: 17: 97225 GSC-ASIC i82596 /proc/interrupts: 22: 921 GSC-ASIC GSC PS/2 keyboard, GSC PS/2 mouse /proc/interrupts: 64: 2663327 CPU timer /proc/interrupts: 65: 498641 CPU lasi /proc/meminfo: MemTotal: 61648 kB /proc/meminfo: MemFree: 3408 kB /proc/meminfo: Buffers: 5812 kB /proc/meminfo: Cached: 43020 kB /proc/meminfo: SwapCached: 2496 kB /proc/meminfo: Active: 25956 kB /proc/meminfo: Inactive: 26304 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 61648 kB /proc/meminfo: LowFree: 3408 kB /proc/meminfo: SwapTotal: 104380 kB /proc/meminfo: SwapFree: 100804 kB /proc/meminfo: Dirty: 268 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 2340 kB /proc/meminfo: Mapped: 1556 kB /proc/meminfo: Slab: 3724 kB /proc/meminfo: PageTables: 448 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 135204 kB /proc/meminfo: Committed_AS: 8500 kB /proc/meminfo: VmallocTotal: 237504 kB /proc/meminfo: VmallocUsed: 2336 kB /proc/meminfo: VmallocChunk: 234784 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0002 Version=ab83 /proc/bus/input/devices: N: Name="AT Raw Set 2 keyboard" /proc/bus/input/devices: P: Phys=2:0:11/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=ec80ffdf 1cfffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found ============================================== Installer status: ============================================== Package: preseed-common Status: install ok unpacked Version: 1.26 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.36 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-11 Description: GNU C Library: NSS helper for DNS - udeb Package: download-installer Status: install ok installed Version: 1.13 Depends: cdebconf-udeb, net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: lowmemcheck Status: install ok unpacked Version: 1.24 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.17 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.44 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: di-utils Status: install ok installed Version: 1.44 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: choose-mirror Status: install ok installed Version: 2.12 Depends: configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 23 Package: input-modules-2.6.18-4-parisc64-di Status: install ok unpacked Version: 1.16 Provides: input-modules Depends: kernel-image-2.6.18-4-parisc64-di, usb-modules-2.6.18-4-parisc64-di Description: Input devices support Package: network-preseed Status: install ok unpacked Version: 1.26 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.113 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: usb-modules-2.6.18-4-parisc-di Status: install ok unpacked Version: 1.16 Provides: usb-modules Depends: kernel-image-2.6.18-4-parisc-di Description: USB support Package: kernel-image-2.6.18-4-parisc64-di Status: install ok unpacked Version: 1.16 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre4-1 Depends: libc6 (>= 2.3.5-1) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.49 Depends: di-utils (>= 1.43), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: udev-udeb Status: install ok unpacked Version: 0.103-2 Depends: libc6 (>= 2.3.5-1) Description: /dev/ and hotplug management daemon Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.5-1) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.5-1) Description: text-wrapping library with i18n - runtime udeb Package: kernel-image-2.6.18-4-parisc-di Status: install ok unpacked Version: 1.16 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: auto-install Status: install ok unpacked Version: 0.03 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: rescue-check Status: install ok unpacked Version: 1.8 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.3-1 Provides: editor Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.113 Provides: debconf-2.0 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 0.03 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: nic-modules-2.6.18-4-parisc-di Status: install ok unpacked Version: 1.16 Provides: nic-modules Depends: kernel-image-2.6.18-4-parisc-di Description: Common NIC drivers Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.113 Depends: cdebconf-udeb, libc6 (>= 2.3.5-1) Description: Plain text frontend for Debian Configuration Management System Package: iso-3166-udeb Status: install ok installed Version: 1.0a-1 Description: provides iso_3166.tab file Package: input-modules-2.6.18-4-parisc-di Status: install ok unpacked Version: 1.16 Provides: input-modules Depends: kernel-image-2.6.18-4-parisc-di, usb-modules-2.6.18-4-parisc-di Description: Input devices support Package: ethdetect Status: install ok installed Version: 1.49 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 17 Package: nic-modules-2.6.18-4-parisc64-di Status: install ok unpacked Version: 1.16 Provides: nic-modules Depends: kernel-image-2.6.18-4-parisc64-di Description: Common NIC drivers Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-4 Depends: libc6 (>= 2.3.5-1) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.26 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.13 Provides: retriever Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16) Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.49 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47) Description: Hardware architecture detector Package: save-logs Status: install ok unpacked Version: 2.28 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.44 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.26 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: choose-mirror-bin Status: install ok installed Version: 2.12 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb Description: Choose mirror to install from (program) Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4-1 Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.01-6 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.44 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.49 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.33 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.47 Depends: libc6 (>= 2.3.5-1) Description: Library of common debian-installer functions Package: usb-modules-2.6.18-4-parisc64-di Status: install ok unpacked Version: 1.16 Provides: usb-modules Depends: kernel-image-2.6.18-4-parisc64-di Description: USB support Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.26 Description: debconf preseeding via environment variables Package: cdebconf-priority Status: install ok unpacked Version: 0.113 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: netcfg Status: install ok installed Version: 1.34 Provides: configured-network Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: zlib1g-udeb Status: install ok unpacked Version: 1:1.2.3-13 Provides: zlib1g Description: compression library - runtime for Debian installer Package: dhcp-client-udeb Status: install ok installed Version: 2.0pl5-19.5 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.113 Depends: libc6 (>= 2.3.5-1), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: debian-installer Status: install ok installed Version: netboot-20070210-07:42 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.18 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.18 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 632 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.72 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19) Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdrom-core-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 444 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di, ide-modules-2.6.18-4-parisc-di Provides: cdrom-core-modules Description: CDROM support This package contains core CDROM support for the Linux kernel. Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 76 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.13 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 160 Maintainer: Anthony Towns <[EMAIL PROTECTED]> Version: 0.3.3.1 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.44 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.49 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 460 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-1 Depends: libblkid1-udeb, libc6 (>= 2.3.5-1) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: ext3-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 380 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.8 Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: ide-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 540 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di Provides: ide-modules Description: IDE drivers This package contains IDE drivers for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1168 Maintainer: Stefan Hornburg (Racke) <[EMAIL PROTECTED]> Version: 1.1.11-1 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 48 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-1 Depends: libc6 (>= 2.3.5-1) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 2136 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.6.ds1-11 Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 92 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2:1.02.12-1 Depends: libc6 (>= 2.3.5-1) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 472 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.7.1-5 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-1 Depends: libc6 (>= 2.3.5-1) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: loop-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lowmem Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.24 Description: free memory for lowmem install Installer-Menu-Item: 25 Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 572 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2.02.06-3 Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.18-4-parisc-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 612 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 216 Maintainer: Debian mdadm maintainers <[EMAIL PROTECTED]> Version: 2.5.6-8 Depends: libc6 (>= 2.3.5-1) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 408 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.20 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Ed Boraas <[EMAIL PROTECTED]> Version: 1:3.6.19-4 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 168 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.15 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: palo-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 12 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.0.8 Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs Provides: bootable-system Description: Install PALO on a hard disk Installer-Menu-Item: 73 Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.20 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 80 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.7.1-5 Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 388 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 66 Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 4 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 164 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 21 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 4 Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 896 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 103 Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 600 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 51 Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 33 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 888 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 19 Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 228 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 45 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 272 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 20 Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 732 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 50 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 31 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-palo Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 92 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 7 Depends: palo-udeb, partman-base Description: Add to partman support for PALO boot partitions Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 380 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 45 Depends: cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 34 Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 320 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 47 Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 224 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.11 Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: scsi-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 860 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: kernel-image-2.6.18-4-parisc-di, cdrom-core-modules-2.6.18-4-parisc-di Provides: scsi-modules Description: SCSI drivers This package contains SCSI drivers for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 304 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.15 Depends: cdebconf-udeb, localechooser Description: choose timezone Installer-Menu-Item: 62 Package: usb-storage-modules-2.6.18-4-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 124 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: ide-modules-2.6.18-4-parisc-di, scsi-modules-2.6.18-4-parisc-di, usb-modules-2.6.18-4-parisc-di Provides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 360 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.10 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 288 Maintainer: Nathan Scott <[EMAIL PROTECTED]> Version: 2.8.18-1 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: hppa (parisc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-parisc Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities ii reportbug 3.31 reports bugs in the Debian distrib -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]