Your message dated Sun, 21 Jul 2013 14:32:43 +0200 with message-id <201307211433.01341.hol...@layer-acht.org> and subject line dealing with old debian-installer bugs has caused the Debian Bug report #605815, regarding /etc/network/run is directory, not link to /dev/shm/network to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 605815: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605815 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: installation-reports Severity: normal -- Package-specific info: Boot method: network Image version: http://http.us.debian.org/debian/dists/squeeze/main/installer-amd64/current/images/netboot/netboot.tar.gz 20-Oct-2010 21:02 8.7M Date: <Date and time of the install> Machine: HP ProLiant MicroServer Partitions: <df -Tl will do; the raw partition table is preferred> Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [E] Comments/Problems: Partitioning hard drives (DI uses title 'Partitioning disks'): - Creating raid 1 In the dialog it says: + "A minimum of 2 active devices is required." The system will have 4 disks but 3 are full with data in the old system and need to be transfered disk by disk. So I wanted to create a raid 1 with 1 active disk and grow it later to 4 disks. + "NOTE: this setting cannot be changed later." mdadm --grow can change it so this is simply not true. - Creating filesystem + Selecting a predefined mount point should set a coresponding label if none is set already. My root partition has label root, /usr has label usr, /var has label var and /home has label home. Install base system: + Check size of common mountpoints (/, /usr, /var) At first I made / too small and it failed much later during the installation of the kernel image. Debian kernels are HUGE compared to my usual build-to-fit custom kernel. It would be good if the installer would know the size requirement for all the usual mountpoints people use and check if the defined partitions have sufficient space. The numbers should be known for at least the standard task, more would be better. General: + Oerall a nice flow. Seems smoother than with lenny. During downloads the remaining time was displayed in seconds. That was a nice touch. + Missing moonbuggy or tetris. One does get bored watching it work. + Missing a text editor on tty5 for making notes during install. It should have a file (/tmp/notes.txt) open and copy it to /target/var/log/installer at the end. Post reboot: (Now we come to the real problems) - Mounting local filesystems...failed. WTF? Why? Why does it continue to boot? The new insserv just keeps on booting even with critial scripts failing. The problem seems to be that the /etc/fstab entry for /proc does not match the entry in /proc/mounts: /etc/fstab: proc /proc proc defaults 0 0 /proc/mounts: none on /proc type proc (rw,nosuid,nodev,noexec,relatime) The mountall.sh script executes this command: # mount -v -a -t nonfs,nfs4,smbfs,cifs,ncp,ncpfs,coda,ocfs2,gfs,gfs2 -O no_netdev; echo $? proc /proc proc defaults 0 0 mount: proc already mounted => exit(32); vs. none /proc proc defaults 0 0 mount: none already mounted on /proc => exit(0); The odd thing is that in /etc/init.d/mountkern.fs there is: domount proc "" /proc proc -onodev,noexec,nosuid The 4th argument is the DEVNAME used in mount. So the /proc should be mounted from 'proc' and not 'none'. Could it be /proc is kept from the initramfs? Is this only showing if /etc/mtab is linkd to /proc/mounts? (see below) - /etc/mtab is not a link to /proc/mounts I configured my / and /usr to be read-only. That means the /etc/mtab must be a link to /proc/mounts. I thought that was now standard for all new installations. It should definetly be a link if / is read-only. - /tmp not tmpfs When selecting / read-only and not having a seperate /tmp partition the installer could configure the system for tmpfs for /tmp. It could offer that option in general (include /var/run and /var/lock). Unfortunately there doesn't seem to be a variable for it. In /etc/default/rcS and /etc/default/tmpfs one can set TMPFS_SIZE, RW_SIZE, RAMRUN, RUN_SIZE, RAMLOCK and LOCK_SIZE. Maybe there should be a RAMTMP setting as well to activate /tmp as tmpfs. Alternative a fstab entry for /tmp does the job too. - /etc/network/run is directory, not link to /dev/shm/network This makes ifup fail during boot and the system is left without networking. The strange thing is that ifupdown support read-only / just fine normaly. The postinst script makes /etc/network/run a link to /dev/shm/network if /etc/network/run is mising and /dev/shm exists. So is /dev/shm missing during DI? The fix for this was quite easy: % rm -rf /etc/network/run % dpkg-reconfigure ifupdown The "mounting local filesystems" problem has surprised me verry badly. That seems like a GRAVE bug to me. The mtab, tmpfs and ifupdown problems are anoying but easily fixed. I had just hoped Debian Squeeze would allow a read-only / + /usr installation by default now. MfG Goswin -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="6.0 (squeeze) - installer build 20101020" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== uname -a: Linux nas 2.6.32-5-amd64 #1 SMP Fri Oct 15 00:56:30 UTC 2010 x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: 00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] lspci -knn: 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (rev 40) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ahci lspci -knn: 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41) lspci -knn: 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: pata_atiixp lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) lspci -knn: 00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] lspci -knn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] lspci -knn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] lspci -knn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] lspci -knn: 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712] lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:1609] lspci -knn: 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:705d] lspci -knn: Kernel driver in use: tg3 usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 02 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 03 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 02: USB Keykoard [1c4f:0002] usb-list: Level 01 Parent 01 Port 04 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: USB usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid usb-list: Interface 01: Class 03(HID ) Subclass 00 Protocol 00 Driver usbhid usb-list: usb-list: Bus 05 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 06 Device 01: OHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub lsmod: Module Size Used by lsmod: hfsplus 65286 0 lsmod: hfs 37455 0 lsmod: minix 21213 0 lsmod: msdos 6202 0 lsmod: ufs 56474 0 lsmod: qnx4 6194 0 lsmod: ntfs 162796 0 lsmod: reiserfs 194156 0 lsmod: battery 4998 0 lsmod: dm_mod 53770 15 lsmod: md_mod 73808 0 lsmod: xfs 436941 0 lsmod: exportfs 3170 1 xfs lsmod: jfs 140105 0 lsmod: ext4 289033 0 lsmod: jbd2 67015 1 ext4 lsmod: crc16 1319 1 ext4 lsmod: ext3 106518 4 lsmod: jbd 37085 1 ext3 lsmod: btrfs 375287 0 lsmod: zlib_deflate 17746 1 btrfs lsmod: crc32c 2560 1 lsmod: libcrc32c 1074 1 btrfs lsmod: vfat 7884 0 lsmod: fat 40038 2 msdos,vfat lsmod: ext2 52969 0 lsmod: mbcache 5050 3 ext4,ext3,ext2 lsmod: sd_mod 29777 2 lsmod: crc_t10dif 1276 1 sd_mod lsmod: pata_atiixp 3489 0 lsmod: ahci 32358 1 lsmod: libata 133616 2 pata_atiixp,ahci lsmod: usb_storage 39561 0 lsmod: scsi_mod 122117 3 sd_mod,libata,usb_storage lsmod: usbhid 33292 0 lsmod: hid 62857 1 usbhid lsmod: fan 3346 0 lsmod: ohci_hcd 19212 0 lsmod: tg3 95663 0 lsmod: thermal 11674 0 lsmod: thermal_sys 11942 2 fan,thermal lsmod: libphy 14054 1 tg3 lsmod: ehci_hcd 31135 0 lsmod: usbcore 121938 5 usb_storage,usbhid,ohci_hcd,ehci_hcd lsmod: nls_base 6377 7 hfsplus,hfs,ntfs,jfs,vfat,fat,usbcore df: Filesystem 1K-blocks Used Available Use% Mounted on df: tmpfs 496856 16 496840 0% /dev df: /dev/mapper/s-root 959512 162600 748172 18% /target df: /dev/mapper/s-home 1919048 35676 1883372 2% /target/home df: /dev/mapper/s-usr 1919048 336784 1484780 18% /target/usr df: /dev/mapper/s-var 959512 118680 792092 13% /target/var df: /dev/mapper/s-root 959512 162600 748172 18% /dev/.static/dev df: tmpfs 496856 16 496840 0% /target/dev free: total used free shared buffers free: Mem: 993716 739496 254220 0 51300 free: Swap: 974840 0 974840 free: Total: 1968556 739496 1229060 /proc/cmdline: vga=788 initrd=debian-installer/amd64/initrd.gz -- quiet BOOT_IMAGE=debian-installer/amd64/linux /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : AuthenticAMD /proc/cpuinfo: cpu family : 16 /proc/cpuinfo: model : 6 /proc/cpuinfo: model name : AMD Athlon(tm) II Neo N36L Dual-Core Processor /proc/cpuinfo: stepping : 3 /proc/cpuinfo: cpu MHz : 1297.859 /proc/cpuinfo: cache size : 1024 KB /proc/cpuinfo: physical id : 0 /proc/cpuinfo: siblings : 2 /proc/cpuinfo: core id : 0 /proc/cpuinfo: cpu cores : 2 /proc/cpuinfo: apicid : 0 /proc/cpuinfo: initial apicid : 0 /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 5 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr /proc/cpuinfo: bogomips : 2595.71 /proc/cpuinfo: TLB size : 1024 4K pages /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 48 bits physical, 48 bits virtual /proc/cpuinfo: power management: ts ttp tm stc 100mhzsteps hwpstate /proc/cpuinfo: /proc/cpuinfo: processor : 1 /proc/cpuinfo: vendor_id : AuthenticAMD /proc/cpuinfo: cpu family : 16 /proc/cpuinfo: model : 6 /proc/cpuinfo: model name : AMD Athlon(tm) II Neo N36L Dual-Core Processor /proc/cpuinfo: stepping : 3 /proc/cpuinfo: cpu MHz : 1297.859 /proc/cpuinfo: cache size : 1024 KB /proc/cpuinfo: physical id : 0 /proc/cpuinfo: siblings : 2 /proc/cpuinfo: core id : 1 /proc/cpuinfo: cpu cores : 2 /proc/cpuinfo: apicid : 1 /proc/cpuinfo: initial apicid : 1 /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 5 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr /proc/cpuinfo: bogomips : 2595.88 /proc/cpuinfo: TLB size : 1024 4K pages /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 48 bits physical, 48 bits virtual /proc/cpuinfo: power management: ts ttp tm stc 100mhzsteps hwpstate /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:14.1 /proc/ioports: 0170-0177 : pata_atiixp /proc/ioports: 01f0-01f7 : 0000:00:14.1 /proc/ioports: 01f0-01f7 : pata_atiixp /proc/ioports: 0376-0376 : 0000:00:14.1 /proc/ioports: 0376-0376 : pata_atiixp /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f6-03f6 : 0000:00:14.1 /proc/ioports: 03f6-03f6 : pata_atiixp /proc/ioports: 040b-040b : pnp 00:08 /proc/ioports: 04d0-04d1 : pnp 00:08 /proc/ioports: 04d6-04d6 : pnp 00:08 /proc/ioports: 0800-089f : pnp 00:08 /proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK /proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK /proc/ioports: 0808-080b : ACPI PM_TMR /proc/ioports: 0820-0827 : ACPI GPE0_BLK /proc/ioports: 08ff-08ff : ACPI PM2_CNT_BLK /proc/ioports: 0900-090f : pnp 00:08 /proc/ioports: 0910-091f : pnp 00:08 /proc/ioports: 0b00-0b1f : pnp 00:08 /proc/ioports: 0b20-0b3f : pnp 00:08 /proc/ioports: 0c00-0c01 : pnp 00:08 /proc/ioports: 0c14-0c14 : pnp 00:08 /proc/ioports: 0c50-0c51 : pnp 00:08 /proc/ioports: 0c52-0c52 : pnp 00:08 /proc/ioports: 0c6c-0c6c : pnp 00:08 /proc/ioports: 0c6f-0c6f : pnp 00:08 /proc/ioports: 0cd0-0cd1 : pnp 00:08 /proc/ioports: 0cd2-0cd3 : pnp 00:08 /proc/ioports: 0cd4-0cd5 : pnp 00:08 /proc/ioports: 0cd6-0cd7 : pnp 00:08 /proc/ioports: 0cd8-0cdf : pnp 00:08 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 9000-900f : 0000:00:11.0 /proc/ioports: 9000-900f : ahci /proc/ioports: a000-a003 : 0000:00:11.0 /proc/ioports: a000-a003 : ahci /proc/ioports: b000-b007 : 0000:00:11.0 /proc/ioports: b000-b007 : ahci /proc/ioports: c000-c003 : 0000:00:11.0 /proc/ioports: c000-c003 : ahci /proc/ioports: d000-d007 : 0000:00:11.0 /proc/ioports: d000-d007 : ahci /proc/ioports: e000-efff : PCI Bus 0000:01 /proc/ioports: e000-e0ff : 0000:01:05.0 /proc/ioports: fe00-fefe : pnp 00:08 /proc/ioports: ff00-ff0f : 0000:00:14.1 /proc/ioports: ff00-ff0f : pata_atiixp /proc/iomem: 00000000-0009e7ff : System RAM /proc/iomem: 0009e800-0009ffff : reserved /proc/iomem: 000e2000-000fffff : reserved /proc/iomem: 00100000-3df8ffff : System RAM /proc/iomem: 01000000-01301144 : Kernel code /proc/iomem: 01301145-014dac2f : Kernel data /proc/iomem: 01577000-01688413 : Kernel bss /proc/iomem: 3df90000-3df9dfff : RAM buffer /proc/iomem: 3df9e000-3df9ffff : reserved /proc/iomem: 3dfa0000-3dfadfff : ACPI Tables /proc/iomem: 3dfae000-3dfdffff : ACPI Non-volatile Storage /proc/iomem: 3dfe0000-3dffffff : reserved /proc/iomem: 3e000000-3fffffff : RAM buffer /proc/iomem: e0000000-efffffff : PCI MMCONFIG 0 [00-ff] /proc/iomem: e0000000-efffffff : reserved /proc/iomem: e0000000-efffffff : pnp 00:09 /proc/iomem: fc000000-fdffffff : PCI Bus 0000:01 /proc/iomem: fc000000-fdffffff : 0000:01:05.0 /proc/iomem: fc000000-fcffffff : vesafb /proc/iomem: fe6fc000-fe6fcfff : 0000:00:16.0 /proc/iomem: fe6fc000-fe6fcfff : ohci_hcd /proc/iomem: fe6fd000-fe6fdfff : 0000:00:13.0 /proc/iomem: fe6fd000-fe6fdfff : ohci_hcd /proc/iomem: fe6fe000-fe6fefff : 0000:00:12.0 /proc/iomem: fe6fe000-fe6fefff : ohci_hcd /proc/iomem: fe6ff000-fe6ff0ff : 0000:00:16.2 /proc/iomem: fe6ff000-fe6ff0ff : ehci_hcd /proc/iomem: fe6ff400-fe6ff4ff : 0000:00:13.2 /proc/iomem: fe6ff400-fe6ff4ff : ehci_hcd /proc/iomem: fe6ff800-fe6ff8ff : 0000:00:12.2 /proc/iomem: fe6ff800-fe6ff8ff : ehci_hcd /proc/iomem: fe6ffc00-fe6fffff : 0000:00:11.0 /proc/iomem: fe6ffc00-fe6fffff : ahci /proc/iomem: fe700000-fe8fffff : PCI Bus 0000:01 /proc/iomem: fe700000-fe7fffff : 0000:01:05.0 /proc/iomem: fe8f0000-fe8fffff : 0000:01:05.0 /proc/iomem: fe900000-fe9fffff : PCI Bus 0000:02 /proc/iomem: fe9f0000-fe9fffff : 0000:02:00.0 /proc/iomem: fe9f0000-fe9fffff : tg3 /proc/iomem: fec00000-fec00fff : IOAPIC 0 /proc/iomem: fec10000-fec1001f : pnp 00:08 /proc/iomem: fed80000-fed80fff : pnp 00:08 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fee00000-fee00fff : pnp 00:07 /proc/iomem: ffa00000-ffffffff : reserved /proc/iomem: ffb80000-ffbfffff : pnp 00:08 /proc/interrupts: CPU0 CPU1 /proc/interrupts: 0: 1638 299241 IO-APIC-edge timer /proc/interrupts: 8: 0 1 IO-APIC-edge rtc0 /proc/interrupts: 9: 0 0 IO-APIC-fasteoi acpi /proc/interrupts: 14: 0 0 IO-APIC-edge pata_atiixp /proc/interrupts: 15: 0 0 IO-APIC-edge pata_atiixp /proc/interrupts: 17: 0 2 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2, ehci_hcd:usb3 /proc/interrupts: 18: 10 2526 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb5, ohci_hcd:usb6 /proc/interrupts: 25: 296 304023 PCI-MSI-edge eth0 /proc/interrupts: 26: 571 94064 PCI-MSI-edge ahci /proc/interrupts: NMI: 0 0 Non-maskable interrupts /proc/interrupts: LOC: 157853 53918 Local timer interrupts /proc/interrupts: SPU: 0 0 Spurious interrupts /proc/interrupts: PMI: 0 0 Performance monitoring interrupts /proc/interrupts: PND: 0 0 Performance pending work /proc/interrupts: RES: 227718 195303 Rescheduling interrupts /proc/interrupts: CAL: 293 63 Function call interrupts /proc/interrupts: TLB: 15454 20570 TLB shootdowns /proc/interrupts: TRM: 0 0 Thermal event interrupts /proc/interrupts: THR: 0 0 Threshold APIC interrupts /proc/interrupts: MCE: 0 0 Machine check exceptions /proc/interrupts: MCP: 9 9 Machine check polls /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 993716 kB /proc/meminfo: MemFree: 253948 kB /proc/meminfo: Buffers: 51300 kB /proc/meminfo: Cached: 583632 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 280556 kB /proc/meminfo: Inactive: 371620 kB /proc/meminfo: Active(anon): 19548 kB /proc/meminfo: Inactive(anon): 4 kB /proc/meminfo: Active(file): 261008 kB /proc/meminfo: Inactive(file): 371616 kB /proc/meminfo: Unevictable: 2296 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: SwapTotal: 974840 kB /proc/meminfo: SwapFree: 974840 kB /proc/meminfo: Dirty: 2300 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 19536 kB /proc/meminfo: Mapped: 2336 kB /proc/meminfo: Shmem: 16 kB /proc/meminfo: Slab: 66400 kB /proc/meminfo: SReclaimable: 58664 kB /proc/meminfo: SUnreclaim: 7736 kB /proc/meminfo: KernelStack: 856 kB /proc/meminfo: PageTables: 728 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 1471696 kB /proc/meminfo: Committed_AS: 24144 kB /proc/meminfo: VmallocTotal: 34359738367 kB /proc/meminfo: VmallocUsed: 277364 kB /proc/meminfo: VmallocChunk: 34359453116 kB /proc/meminfo: HardwareCorrupted: 0 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 2048 kB /proc/meminfo: DirectMap4k: 7744 kB /proc/meminfo: DirectMap2M: 1007616 kB /proc/meminfo: DirectMap1G: 0 kB /proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100 /proc/bus/input/devices: N: Name="Macintosh mouse button emulation" /proc/bus/input/devices: P: Phys= /proc/bus/input/devices: S: Sysfs=/devices/virtual/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=mouse0 /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 /proc/bus/input/devices: B: REL=3 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=1c4f Product=0002 Version=0110 /proc/bus/input/devices: N: Name="USB USB Keykoard" /proc/bus/input/devices: P: Phys=usb-0000:00:12.0-5/input0 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=1c4f Product=0002 Version=0110 /proc/bus/input/devices: N: Name="USB USB Keykoard" /proc/bus/input/devices: P: Phys=usb-0000:00:12.0-5/input1 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input2 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=1f /proc/bus/input/devices: B: KEY=837fff002c3027 bf00444400000000 1 c040a27c000 267bfad941dfed 9e000000000000 0 /proc/bus/input/devices: B: REL=40 /proc/bus/input/devices: B: ABS=100000000 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
--- End Message ---
--- Begin Message ---reassign 716710 preseed,release-notes forcemerge 704881 552563 tags 633128 + confirmed reassign 633128 src:linux,kernel-wedge affects 633128 debian-installer reassign 653391 archdetect forcemerge 653390 653391 reassign 655579 rootskel-gtk reassign 690246 partman-lvm affects 690246 debian-installer severity 699430 wishlist reassign 655124 kernel-wedge affects 655124 debian-installer thanks Hi, thank you for submitting bug reports concering debian-installer, much appreciated. I read through all the bugs mentioned here (and I'm sure they were read by several people at the time they were submitted) and am closing them now as/if - they (finally) indicated success and/or - I know from first hand experience that the functionality is working in Wheezy and/or - they only contained very little information and/or - they contained user errors and/or - they have been from a development phase where things were not stable and/or - they are very old and/or - they are wishlist but rather special + exotic and not have been acted on for years. (See http://blog.liw.fi/posts/wishlist-bugs/ why it's often useful to close wishlist bugs.) If I've closed a bug incorrectly please do reply (it's easy to reopen and I'll do if requested) or just file a new one - and that's often better, as the bug log will be clearer and shorter and not contain cruft. cheers, Holgersignature.asc
Description: This is a digitally signed message part.
--- End Message ---