Package: installation-reports Boot method: TFTP+USB.iso+ ttl pl2303+network Image version: https://d-i.debian.org/daily-images/armhf/daily/hd-media/hd-media.tar.gz https://cdimage.debian.org/cdimage/weekly-builds/armhf/iso-cd/debian-testing-armhf-xfce-CD-1.iso Date: 28.03.2018_01:50am msk
Machine: ---Orange pi zero h2--- Processor: 1.2 Ghz Quad Core H2+ ARM Cortex A7 CPU Memory: 512 MB DDR3 SDRAM Partitions: < вывод результата команды df -Tl; лучше таблицу разделов в необработанном (raw) виде> Вывод результата команд lspci -knn и lspci -nn: Base System Installation Checklist: [O] = OK, [E] = Ошибка (описать подробности ниже), [ ] = не пробовал Initial boot: [ ] Detect network card: [ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: Installation went fine on the sdcard. Installed on Orange piZERO <sun8i-h2-plus-orange-zero.db>. Loading from the Sdcard does not occur. ====================================================================== U-Boot SPL 2017.09-armbian (Nov 22 2017 - 16:49:05) DRAM: 512 MiB Failed to set core voltage! Can't set CPU frequency Trying to boot from MMC1 U-Boot 2017.09-armbian (Nov 22 2017 - 16:49:05 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 4 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop => run mmc_boot switch to partitions #0, OK mmc0 is current device ** Bad device specification mmc -bootable ** Scanning mmc :1... Found U-Boot script /boot.scr 2627 bytes read in 153 ms (16.6 KiB/s) ## Executing script at 43100000 Mainline u-boot / new-style environment detected. 4121088 bytes read in 511 ms (7.7 MiB/s) ** File not found /dtbs/4.14.0-3-armmp-lpae/sun8i-h3-orangepi-pc.dtb ** SCRIPT FAILED: continuing... => <INTERRUPT> => => bootz Starting kernel ... ---Hangs no reaction--- ======================================================================