* Vincent Danjean [EMAIL PROTECTED] [2006-02-03 02:11]:
Yes, when I will have some free time. Probably one or two months from
now. But, it is possible that I try to merge my work with latex-mk.
I do not look at it in details yet. So I do not know if it is
possible or not.
That would be a
On Fri, Feb 03, 2006 at 09:12:12AM +0200, Juha Jäykkä wrote:
/bin/sh ../libtool --debug --mode=link gcc -Wall -Wmissing-prototypes
-Wpointer-arith -Wbad-function-cast -Wmissing-declarations
-Wnested-externs -g -O2 -o bits bits.o -lresolv -pthread -lpthread
libtool.debug
where
tags + confirmed
thanks
While testing backup-manager with piuparts, I ran into the following
problem:
2m22.8s ERROR: Package purging left files on system:
/etc/backup-manager.conf.dpkg-dist
/etc/backup-manager.conf.old
/etc/cron.d/backup-manager
/tmp/tmp.H1WGhT
/tmp/tmp.kL12aT
Both a2ps -r and the -gravity switch to convert work fine for me with
6:6.2.4.5-0.6. I suspect this was a fortunate side-effect when switching
ps support from libdps to the gs delegate in -0.4.
I can no longer reproduce the a2ps -r bug, but -gravity still produces
insane BBoxes:
~ convert
Package: ipmitool
Version: 1.8.4-2
Severity: important
1.8.4-2 and prior version segfault when I try to set the lan ip address
with ipmitool -I open lan set 2 ipaddr xxx.xxx.xxx.xxx, 1.8.6 fixes
that.
Also, in debian/control, there is missing the 's' in Suggests_s_:
You can find my sarge package
Matthew,
Given Andi's comments, one possibility is to put the PyLucene package
into Debian, but under the contrib section and marking it with appropriate
bug entries. The hope would be people could improve the build situation
over time.
Another possibility - maybe - is to package an older
Package: gaphor
Version: 0.7.1-1
Severity: normal
Hello
A new version of diacanvas and gaphor is available.
Please package it :)
Have a nice day
Frédéric
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Hi Juha,
* Juha Jäykkä wrote on Fri, Feb 03, 2006 at 08:12:12AM CET:
Can you definitely rule out that it does not happen when the source is
not on AFS (but otherwise the same system)?
I can. I built 0.7.1-1 on both AFS and xfs, AFS fails, xfs works; then I
tried 0.7.1-3 on AFS, still
Hey [EMAIL PROTECTED],
You must fill out the application COMPLETELY.
au.geocities.com/meriel35575gerry5113
Please do this ASAP.
Regards,
Mayer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: python2.3-twisted-words
Version: 0.3.0-1
Hello,
python2.3-twisted 2.0.1 seems to try to split itself into multiple
packages and declares itself as transitional package. python2.3-twisted
depends on these packages, which is okay.
However, some of these packages depend back on
If you are using stable, you should rather use the packages I uploaded
on backports.org than pinning over to unstable.
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email: [EMAIL PROTECTED]
Internet: http://people.panthera-systems.net/~daniel-baumann/
Package: fuse
Version: 2.5.1-1
Tags: FTBFS
Severity: minor
from the build log (on amd64):
chmod u+s /usr/src/debian/fuse-2.5.1/debian/tmp/usr/bin/fusermount
mknod /usr/src/debian/fuse-2.5.1/debian/tmp/dev/fuse -m 0666 c 10 229
make[4]: Leaving directory `/usr/src/debian/fuse-2.5.1/util'
mkdir -p
On Fri, Feb 03, 2006 at 12:33:12AM +, Stephen Gran wrote:
This one time, at band camp, Sven Luther said:
On Mon, Jan 30, 2006 at 01:11:44PM +0100, Jonas Smedegaard wrote:
On Sun, 29 Jan 2006 15:20:34 +0100
Sven Luther [EMAIL PROTECTED] wrote:
i, wearing my powerpc debian
Sorry, this message went to the wrong bugno, please ignore my previous
message
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
This bug has been open for more than 6 months with no fix. It's caused by
an error in the rules file, causing syslogd to be built with incorrect
large file support. There are two lines that need to be altered. The
patch to fix the problem is inline below. It was also attached to the bug
Hi,
I see that Mark Purcell (CC'ed) has created an alioth project for
packaging mythtv, but I cannot see any progress on that side yet.
Marc, could you please give a status update in this bug trail?
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
~ nm bits.o
r
t
0520 t
0a30 t
U
U
U
U
U
U
0af0 T
U
U
Hi,
I see that Mark Purcell (CC'ed) has created an alioth project for
packaging mythtv [1], but I cannot see any progress on that side yet.
Marc, could you please give a status update in this bug trail?
Thanks
[1] http://alioth.debian.org/projects/pkg-mythtv/
--
To UNSUBSCRIBE, email to
On 02/02/06, Hasso Tepper [EMAIL PROTECTED] wrote:
There is no way to generate myspell dictionary from ispell one for
Estonian. Ispell just doesn't have support for compound words. Using -C
is ugly workaround, which makes ispell dictionary somewhat usable for
estonians, but it's acceptable
Max Kellermann wrote:
On 2006/02/02 17:57, Wolfgang Baer [EMAIL PROTECTED] wrote:
this is completely unreproducible here and on other machines.
Please retry and if it still fails provide information about your system
and versions of packages involved in the build (version of make ...)
It
Hi Wolfgang,
On Thu, 2006-02-02 18:06:34 +0100, Wolfgang Baer wrote:
Frohner Akos wrote:
The example build.xml file reports the following error with 1.6.5-4,
1.6.5-5, but worked up to 1.6.5-3 (explicitly checked with 1.6.2):
Have you explicitly checked with 1.6.5-3 ?
Checking with
On 2006/02/02 17:57, Wolfgang Baer [EMAIL PROTECTED] wrote:
this is completely unreproducible here and on other machines.
Please retry and if it still fails provide information about your system
and versions of packages involved in the build (version of make ...)
It is perfectly reproducible
On Fri, Feb 03, 2006 at 05:17:05AM +0100, Jonas Smedegaard wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 3 Feb 2006 01:13:49 +0100
Sven Luther [EMAIL PROTECTED] wrote:
I still suspect that your proposed fix, Sven, can hurt in cases
other than the specific one you know
Package: libmdbtools
Version: 0.5.99.0.6pre1.0.20051109-1
Severity: important
Tags: patch
Hello !
The function floor_log10 fails to check if the argument is infinite or not,
which causes
infinite recursion in case the database contains some infinite floats. I joined
a simple fix
that
Package: mysql-server-5.0
Version: 5.0.18-7
Severity: important
From the preinst script:
# Abort if ISAM tables are present.
if [ -n `find $DATADIR -name '*.ISM'` ]; then
db_input high mysql-server-$this_version/no_upgrade_with_isam_tables
|| true
db_go
db_stop
exit 1
fi
This
severity 344541 wishlist
tags 344541 wontfix
thanks
Milan Zamazal [EMAIL PROTECTED] wrote:
I think proper dependencies on module-init-tools and udev
(/etc/udev/rules.d/025_libsane* suffers from a similar problem) should
be declared. I don't accept the excuse that user should run only pure
retitle 350792 mia: update developers-reference for the new scripts
user [EMAIL PROTECTED]
# make new tag
usertags 350792 + mia
usertags 344847 + mia
thanks
Hi Bartosz,
I just wanted to check mia database of some developer, so I tried to use
hints available in developers' reference. It states
Package: libpam-unix2
Version: 1.25-1
Severity: important
Until now, we had a problem: all applications using PAM for
authentication, like sshd, wdm and su, did crash with a segmentation
every time that a user did type a wrong password. This happened on amd64
machines with Debian sarge 3.1 (libc
Hi,
With fai-kernels 1.10.2 it still opses for me in xfs. However xfs works
with a home built kernel based on 2.6.15-rc4, with a completely
different config though.
/torkel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: xmms-iris
Version: 0.12-2
Followup-For: Bug #327323
Happens on my system too. From the command line we see:
% xmms
Message: device: default
config.c: bad iris plugin version detected in /home/foobar/.xmms/config,
using default configuration
Segmentation fault
Package: ntp-server
Version: 1:4.2.0a+stable-8.1
Followup-For: Bug #329746
I got the same error today when upgrading from 4.2.0a+2sarge1 to
4.2.0a+stable-8.1.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
The translation is in the Liferea package, so I'm hopefully trying to
close the bug I've never tried this before, so lets see what
happens. The translation is also in the latest Liferea release.
I'm afraid you missed the desktop file translations I also attached.
Can yu include them in the
Am Donnerstag, den 02.02.2006, 09:34 +0100 schrieb Javier
Fernández-Sanguino Peña:
I'm also doing the general aptitude's l10n maintenance, so, I think I
will review the differences between our translations?
Yes, please, I would appreciate it. Two minor issues I found:
- inconsistent use
On Fri, 2006-02-03 at 00:49 +0100, KELEMEN Peter wrote:
Package: xserver-xorg
Version: 6.9.0.dfsg.1-4
Severity: normal
Start up an xterm with some FreeType fontface:
uxterm -fa Monospace -fs 12
In the terminal, start spewing lot of output lines:
find /
Observe the X
package python2.3-twisted-conch
reopen 351212
thanks
Hi,
On Fri, Feb 03, 2006 at 10:51:48AM +0100, Matthias Klose wrote:
wrong. please check before filing mass bug reports.
What's wrong with it? I did check, did you?
[EMAIL PROTECTED]:/home/holbe% dpkg -p python2.3-twisted-conch | egrep
Package: devscripts
Severity: wishlist
http://tmrc.mit.edu/mirror/twisted/Words/ contains directories of the
form \d\.\d, which itself hold the tarballs including the subminor
version number. uscan currently cannot determine the correct upstream
version number. what would be needed, is a two step
Package: xsp
Severity: wishlist
Tags: patch l10n
Here is an update for the Swedish debconf translation.
Regards,
Daniel
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh
Package: mutt
Version: 1.5.11+cvs20060126-1
Severity: normal
Since upgrading to 1.5.11+cvs20060126-1, fetching message headers
takes ages... with 1.5.11-5, opening my spamfolder via imaps with
about 7000 mails took a few seconds. Since upgrading to the latest
package from unstable, it takes about
Hi Luk,
do you have any news about #339514? Could you please provide me
some hints to solve your problem?
Thanks,
--
Fabio Tranchitella [EMAIL PROTECTED].''`.
Proud Debian GNU/Linux developer, admin and user.: :' :
Il giorno ven, 13/01/2006 alle 16.43 +0100, Holger Paulsen ha scritto:
Package: zope-photo
Version: 1.2.4-2
Trying to remove zope-photo fails:
,
| nr152:~# apt-get remove zope-photo
| Reading package lists... Done
| Building dependency tree... Done
| The following packages will be
On Wed, Feb 01, 2006 at 04:26:29PM -0600, Ming Hua wrote:
Just set config /FrontEnd/X11/Dynamic = false. Because when using
dynamic xim mode, the keyevents won't be sent to scim when it's
disabled.
after some initial problems (my changes to .scim/config being
overwritten?!) I can now
I also have this problem, and from my observations the problem seems to
be with rendering of vector graphics in pdf files.
--
Joakim Lundborg [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: chkrootkit
Version: 0.44-2
Severity: normal
The cfsd daemon (from package cfs) runs on localhost:3049. This gives a
false positive in the bindshell test.
Workaround:
$OPT=-anp
netstat $OPT | ... | grep -v '127\.0\.0\.1:3049.*/cfsd'
-- System Information:
Debian Release: 3.1
I submitted the attached patch to fix this but to KDE bugzilla last night
https://bugs.kde.org/show_bug.cgi?id=68732
Summarising for debbug:
1. Followup-To was being populated from Newsgroups at start and every
time Newsgroups changed;
2. Followup-To widget was a single entry combo box with no
Am Montag, den 30.01.2006, 17:51 +0100 schrieb Daniel Nylander:
Ruben Porras skrev:
it seems to me that you didn't work for this fix with the last po file.
Your file doesn't have the entry with different cases for
singular/plural translated, and it has many ' instead of .
If you've lost
Package: gnome-panel
Version: 2.12.2-3
Severity: normal
hi
I have one drawer in my panel ; when I click the drawer icon it
opens, but sometimes it then refuses to close (either by clicking the
drawer icon or the arrow on top of it, or by launching an
application); in that case, the only solution
No open bugs. Thanks for leaving this package in good shape.
To adopt gbatnav I must repackage it as the new maintainer. Here it is,
version 1.0.4cvs20051004-3:
http://www.cek.bitacoras.com/debian/
I'm looking for a sponsor to verify and upload it.
Thanks in advance,
César.
reassign 348513 perl-tk
severity important
thanks
Hilmar Preusse [EMAIL PROTECTED] wrote:
On 19.01.06 Frank Küster ([EMAIL PROTECTED]) wrote:
Hi all,
But the segfault should be investigated; I'm unsure whether I just
should reassign to perl - what do others think?
Well, the perl package
Package: libmysqlclient-dev
Severity: normal
I tried to run apt-get build-dep courier-maildrop - apt-get balls out
with an unmet depency on the virtual package libmysqlclient-dev which
can be provided by installing libmysqlclient10-dev and
libmysqlclient12-dev but NOT libmysqlclient14-dev. This
Locally, using slime (the debian package) from the same machine, it works.
But it fails (with the message error in process filter: if: Wrong
number of arguments: nil, 12) if I try to connect slime from a remote
machine via a ssh tunnel (ssh -L 4005:127.0.0.1:4005 -p
lispserveraddr; then M-x
clone 351198 -1
reassign -1 clamav-freshclam
retitle -1 clamav-freshclam: Uses ucf at purge
thanks
This one time, at band camp, Lars Wirzenius said:
While testing clamav-base with piuparts, I ran into the following
problem (shortened, the ucf problem was repeated many times):
0m8.0s DUMP:
Package: wnpp
Severity: wishlist
* Package name: mono-heap-prof
Version : 0.0+svn.r56265
Upstream Author : Ben Maurer [EMAIL PROTECTED]
* URL : http://www.go-mono.org
* License : X11
Description : Mono Heap Profiler
This package contains a heap profiler
Package: debconf
Version: 1.4.69
Severity: wishlist
Tags: l10n-Patch
Hi,
Please find attached the french po templates translation, proofread by
the debian-l10n-french mailing list contributors.
This file should be put as debian/po/fr.po in your package build tree.
Regards
--
steve
Package: portmap
Version: 5-9
Severity: important
Sometimes, the portmapper gets stuck in recvmsg() and does not respond
to any new requests, breaking NFS, NIS, and so on...
The strace below shows the problem. It was obtained running
'rpcinfo -p myserver' in a loop during 10 minutes.
On the
Subject: openoffice.org: README.Debian refers to nonexisting README.gz
Package: openoffice.org
Version: 2.0.1-2
Severity: minor
*** Please type your report below this line ***
/usr/share/doc/openoffice.org/README.Debian.gz contains the following
line:
Please read the official README.gz (in the
Package: acidbase
Version: 1.2.1-4
Severity: wishlist
Tags: l10n Patch
Hi,
Please find attached the french debconf templates translation, proofread by
the debian-l10n-french mailing list contributors.
This file should be put as debian/po/fr.po in your package build tree.
Regards
--
On Friday 03 February 2006 20:26, you wrote:
I see that Mark Purcell (CC'ed) has created an alioth project for
packaging mythtv [1], but I cannot see any progress on that side yet.
If you are just after some mythtv deb's then you should grab them from:
deb ftp://ftp.nerim.net/debian-marillat/
On Wed, Feb 01, 2006 at 10:52:25AM +0100, Marco d'Itri wrote:
On Feb 01, Marc Haber [EMAIL PROTECTED] wrote:
On Wed, Feb 01, 2006 at 03:08:42AM +0100, Kay Sievers wrote:
What does udevtest print on your box?
With or without the block/removable rule in place? With or without the
CF card
Package: openssh-client
Version: 1:4.2p1-5
Severity: wishlist
I operate several servers with a variety of SSH versions. I try to
keep my ~/.ssh/config file in sync, but it's difficult because e.g.
3.8 barfs when it sees HashKnownHosts.
Couldn't SSH instead of barfing just ignore options it does
Package: wdiff
Version: 0.5-16
Severity: wishlist
If using wdiff on TeX files, it's really annoying if a change
involves attached TeX tags. E.g.:
This
link\footnote{\link{http://www.chiark.greenend.org.uk/{\tilde}sgtatham/bugs.html}}
If I wanted to capitalise link, wdiff would say that
Package: istanbul
Version: 0.1.1-1
Severity: normal
As we all know this program is unusable when you have taskbar in the bottom of
the screen (#341303). IMHO 90% of all users have it here.
How did they manage to override default gtk behaviour of such menus?
Anyway...
If the GUI is unusable,
Package: samba
Version: 3.0.21a-1
Severity: normal
I did an upgrade yesterday, and since then I'm being bombarded with
Segfault in Samba email messages.
From smbd.log:
[2006/02/03 12:25:51, 1] smbd/service.c:make_connection_snum(666)
jop (192.168.170.196) connect to service data initially as
Just a me too on this, a bit annoying to have to change the calling
script. It'd be nice to have it fixed to avoid other people being
bitten by it since I'd have thought it was a trivial fix.
Cheers,
Adrian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Le Vendredi 03 Février 2006 07:06, Matt Kraai a écrit :
On Thu, Feb 02, 2006 at 07:01:02AM -0800, Bruce Korb wrote:
Oops. Yes, that's right. Nevertheless, alpha had the same issue, only
more reliably. As soon as I have a round tuit, I'll make a check on an
alpha I was just granted access
Package: chrootuid
Version: 1.3-4
Followup-For: Bug #328444
$ sudo /usr/bin/chrootuid / root /bin/mktemp -d -p /mnt/chroot
single_mode-chroot-root.XX
/usr/bin/chrootuid: invalid option -- d
chdir(-p): No such file or directory
zsh: exit 1 sudo /usr/bin/chrootuid / root /bin/mktemp -d
On Friday 03 February 2006 12:18, Giovanni Gigante wrote:
Locally, using slime (the debian package) from the same machine, it works.
But it fails (with the message error in process filter: if: Wrong
number of arguments: nil, 12) if I try to connect slime from a remote
machine via a ssh
tag 350220 + pending
thanks
* Martin Michlmayr [EMAIL PROTECTED] [2006-01-28 00:56]:
Please add a udeb to beep.
Done so, though with a slightly different patch, like no double
dpkg-shlibdeps call and no seperate debian/files file.
Thanks for the hint, though.
Alfie
--
WARNING: Do not
Here is the traceback on Aquamacs 0.9.8 (emacs 22.0.50.1)
Debugger entered--Lisp error: (wrong-number-of-arguments nil 12)
signal(wrong-number-of-arguments (nil 12))
(if (= (length --cl-rest--) 7) (pop --cl-rest--) (signal (quote
wrong-number-of-arguments) (list nil ...)))
(let*
Hi,
why are those kernel files removed with rm in the first place, and not with
dpkg -r ??
2nd: /boot/patches* belongs to the linux|kernel-image package and exists, if
the kernel was build using patches. (and make-kpkg obviously).
regards,
Holger
pgpxkAkQjw6Jt.pgp
Description: PGP
On Fri, 3 Feb 2006, martin f krafft wrote:
Package: wdiff
Version: 0.5-16
Severity: wishlist
If using wdiff on TeX files, it's really annoying if a change
involves attached TeX tags. E.g.:
This
link\footnote{\link{http://www.chiark.greenend.org.uk/{\tilde}sgtatham/bugs.html}}
If
Package: ftp.debian.org
Could you please remove the 1.8.1-9 build of geomview for the
following architectures: ia64, hppa, s390.
These architectures are no longer on the list to build for geomview.
Thanks,
-Steve (geomview maintainer)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Package: zeroconf
Version: 0.6.1-1
Severity: important
zeroconf gets Bus Error on sparc. Default binary package is without debug info
so gdb didn't find anything. So I recompiled the package with debug and got
some crash info (below). It seems that p.target_ip is not aligned to 32 bits
and this
* Gerfried Fuchs [EMAIL PROTECTED] [2006-02-03 13:25]:
and no seperate debian/files file.
Are you sure that works? When I didn't use a bogus debian/files~ file
the build complained about a missing .deb. (I used the gnupg package
as an example of how to create udebs without debhelper, fwiw).
--
On Mon, Jan 30, 2006 at 10:51:10PM +0100, Marco d'Itri wrote:
small typo in the manpage:
GOTO Jumps to the next LABEL with a matching gname
should read
GOTO Jumps to the next LABEL with a matching name
Fixed.
Thanks,
Kay
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
reopen 330112
thanks
On 2006-01-10 02:48:18 -0800, Debian Bug Tracking System wrote:
* Depends on new libnautilus-burn2 (closes: #330112, #336458).
There's still the same problem. One shouldn't be forced to
install a burning package; python2.3-gnome2-extras should
probably be split into
Package: totem-xine
Version: 1.2.1-3
Severity: important
totem-xine can't play dvd.
the dvd menu is loade, but wen totem starts to play the video, it stops
reporting the following error:
Error Occured:
The audio device is busy. Is another application using it?
gxine instead is able to play
Package: gnome-applets
Version: 2.12.2-4
Severity: normal
Hi,
Better put your thick skin on, as I'm unhappy with a 'feature'...
But I'll try to be a bit more polite than some others have been
about sort of thing ;-)
The new behaviour of the sticky notes applet to no longer allow
hiding them by
On jeu, fév 02, 2006, Luis M wrote:
Sorry, i haven't use rythmbox in a while. Everytime i use it it simply
doesn't work. Perhaps I should compile a version without gstreamer (is
this possible?).
It was in the past, now you have the choice between GStreamer 0.8 or
0.10. I just uploaded
also sprach Santiago Vila [EMAIL PROTECTED] [2006.02.03.1351 +0100]:
It is a little bit late to change the behaviour of this program.
Instead, why don't you wdiff the result of running dvi2tty on the .dvi files?
What if I cannot produce the .dvi files because my publisher has all
the periphery?
Hi Paul,
On Fri, Feb 03, 2006 at 01:03:07PM +0100, Paul Slootman wrote:
I did an upgrade yesterday, and since then I'm being bombarded with
Segfault in Samba email messages.
Did those emails not include a usable backtrace? (Possibly not, since I'm
told gdb doesn't handle -fPIE very well,
Package: aptitude
Version: 0.4.1-1
Severity: normal
I am using testing, and my net connection is bad quality (WLAN).
So it happens quite regularly that the testing/main Packages.gz
is fetched with some error in it (and a file size that is too
big). Then gzip fails (which ruins the display, but
Package: dh-make
Version: 0.40
Severity: normal
Tags: patch
The generated kernel-module-source package misses debian/compat causing
debhelper to whine about deprecated compat levels while building the
module package.
This patch should be applied after the patch for #350938.
-- System
Package: libgtkspell0
Version: 2.0.10-3
Severity: normal
I'm using polish locale, and so libgtkspell uses polish dictionary. However
sometimes i write in cyrlic, so I do right click and select Cyrlic from input
method. Every word written in cyrlic is of course marked as incorrect.
The real
Package: wnpp
Severity: wishlist
Owner: Gonéri Le Bouder [EMAIL PROTECTED]
* Package name: sickle
Version : 0.3
Upstream Author : Duncan Martin [EMAIL PROTECTED]
* URL : http://www.codebunny.org/coding/sickle/
* License : BSD
Description : mail
Package: lmbench
Version: 2.0-patch2-9
Followup-For: Bug #296594
if you ask me, the entire packaging is broken beyond imagination. the
upstream scripts contain a lot of relative paths that depend on the
original file locations. relocating the files according to debian's
policy without patching
Package: dh-make
Version: 0.40
Followup-For: Bug #350938
tag 350938 + patch
--- dh-make-0.40/lib/debiank/rules.orig 2005-05-18 13:00:29.0 +0200
+++ dh-make-0.40/lib/debiank/rules 2006-02-03 14:20:56.0 +0100
@@ -140,12 +140,12 @@
dh_installdirs -p$(psource)
On Fri 03 Feb 2006, Steve Langasek wrote:
On Fri, Feb 03, 2006 at 01:03:07PM +0100, Paul Slootman wrote:
I did an upgrade yesterday, and since then I'm being bombarded with
Segfault in Samba email messages.
Did those emails not include a usable backtrace? (Possibly not, since I'm
told
Good day [EMAIL PROTECTED],
You must fill out the application COMPLETELY.
ca.geocities.com/ester92461benedicto71112
Please do this ASAP.
Get back to you later,
Dawn Hartman
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
* Norbert Tretkowski wrote:
Since upgrading to 1.5.11+cvs20060126-1, fetching message headers
takes ages... with 1.5.11-5, opening my spamfolder via imaps with
about 7000 mails took a few seconds. Since upgrading to the latest
package from unstable, it takes about two minutes, even with header
Package: findutils
Version: 4.1.20-6
Severity: wishlist
It would be useful to have an option in xargs that specifies that the
filename separator is a linefeed (or an option to specify any arbitrary
separotor).
This would be really useful with find where filenames have spaces. I
know that
Package: installation-reports
Severity: important
(severity important as a compromise -- I'd mark it grave if I
thought all current installs would run into this, but I have no
idea at all whether that's true, and in fact suspect it isn't since
I'd expect some other reports by now.)
Boot
On Fri, Feb 03, 2006 at 12:32:40PM +0100, Marc Haber wrote:
On Wed, Feb 01, 2006 at 10:52:25AM +0100, Marco d'Itri wrote:
On Feb 01, Marc Haber [EMAIL PROTECTED] wrote:
On Wed, Feb 01, 2006 at 03:08:42AM +0100, Kay Sievers wrote:
What does udevtest print on your box?
With or without
reopen 349212
thanks
On Fri, Feb 03, 2006 at 01:52:29PM +, Stephen Gran wrote:
That problem was related to fuse-utils package and not sshfs itself.
Since 2.5.x version of fuse it contains mount.fuse file, so this problem
should disappear, thus I'm closing this bug.
Feel free to
Package: ding
Version: 1.4-3
Severity: normal
An upgrade from 1.3-5 (stable/sarge) to 1.4-3 (testing/etch) removes the
package trans-de-en rather than update it too.
---(kaimartin)---
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (500,
Package: apache2
Tags: security, sarge
Version: 2.0.54-5
Severity: important
Upstream reports a DoS issue in Apache:
http://issues.apache.org/bugzilla/show_bug.cgi?id=37791
This has been fixed in sid's apache2 2.0.55-4, but seems to remain
in sarge.
Impact does not seem to be substantial (very
Matt: Can you send us the output of
kpsewhich -show-path .tfm
It is strange that this one isn't found.
$ kpsewhich -show-path .tfm
I second this wish.
I have the same problem here.
Am 2006-02-03 12:54:31, schrieb martin f krafft:
Package: openssh-client
Version: 1:4.2p1-5
Severity: wishlist
I operate several servers with a variety of SSH versions. I try to
keep my ~/.ssh/config file in sync, but it's difficult because
Package: texmacs
Version: 1:1.0.6-2
Severity: normal
When using the big symbol \bigsqcap, which is a sort of product, latex
output does not work, because the package stmaryrd should be used.
Adding
\usepackage{stmaryrd}
to the produced Latex file solves the problem.
-- System Information:
Hi !
I confirm that this bug is fixed with kphone 4.2.
So I will tag this bug as sarge.
Cheers,
--
Ludovic Drolez.
http://www.palmopensource.com - The PalmOS Open Source Portal
http://www.drolez.com - Personal site - Linux and PalmOS stuff
--
To UNSUBSCRIBE, email to [EMAIL
Package: gnome-system-monitor
Version: 2.12.2-2
Severity: normal
In disk usage tab. There are some strange messages. On everery progress bar
showing percentage usage of mounted disk I have Progress bar label|.
This problem occurs only when I have polish locale.
I made:
$ msgunfmt
1 - 100 of 344 matches
Mail list logo