(Justin's mail was sent to dle only. It is quoted at the end of this answer)
Quoting Justin B Rye ([EMAIL PROTECTED]):
Christian Perrier wrote:
OK, as there are templates changes, this is a good occasion to review
the entire templates set for this package, as it doesn't follow the
usual
tags 152550 +pending
tags 353198 +pending
tags 356377 +pending
tags 401798 +pending
thanks
Applied in git, thanks.
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email: [EMAIL PROTECTED]
Internet: http://people.panthera-systems.net/~daniel-baumann/
--
Quoting Juan Manuel García Molina ([EMAIL PROTECTED]):
Hi, Yuri.
Thanks for your submission.
It will be included in the next revision of the package.
Again, thank you very much for your contribution.
Hmmm, have you seen l10n NMU intent and Announcing l10n NMU mails
I sent to #449403 ?
Quoting Yuri Kozlov ([EMAIL PROTECTED]):
Package: mxallowd
Severity: wishlist
Tags: l10n patch
Russian debconf templates translation is attached.
The maintainer changed the templates slightly (plural/singular).
Could you update the attached file ?
ru.po
Description:
On Thu, Jun 26, 2008 at 07:33:40PM -0700, Daniel Burrows wrote:
Which architectures besides amd64 are failing? I'd like to verify the
fix, but there doesn't seem to be an amd64 emulator in the archive...
and it looks like everything else succeeded.
alpha, ia64 and s390.
You know there are
Thursday 26 June 2008, Moritz Muehlenhoff wrote:
..
What's the status? Shall we push the fix in the upcoming r4 release?
Not unless you want to break the asterisk in the r4 release badly.
The status: The patch did not do its job, instead it did open up for a rather
huge set of instability
Package: groff-base
Version: 1.18.1.1-20
Severity: normal
There are manpages that use \' (the escaped version of the apostroph) to get
pretty quotes around words. However \' maps to the acute accent which is
not present in ISO-8859-15 (and some other LatinX variants). Thus the next
command in the
On Thu, June 26, 2008 18:47, James Westby wrote:
a user reported problems when their key file is on a filesystem using
extended attributes. It would be great to support this.
The following patch bugmenot is used in Ubuntu to allow this. Please
consider applying it.
Seems reasonable. Thanks,
On Thu, June 26, 2008 18:39, James Westby wrote:
https://bugs.edge.launchpad.net/ubuntu/+source/cryptsetup/+bug/185380
a user had problems due to attempting to use a comment at the end of the
line in /etc/crypttab. It would be great if you could support this.
The following patch by Reinhard
Ketil Vestby wrote:
Thursday 26 June 2008, Moritz Muehlenhoff wrote:
..
What's the status? Shall we push the fix in the upcoming r4 release?
The status: The patch did not do its job, instead it did open up for a rather
huge set of instability problems in addition to the original problem. I
On Thu, Jun 26, 2008 at 11:20:04PM +0200, Andreas Henriksson wrote:
Yes, If someone installed the package they most likely did it for a
reason - like running the application. If they don't want it, they can
remove the package (or not install it to start with?!).
Yes but the reason might be
tags 488212 wontfix confirmed
thanks
Sure thing, but I don't see how logcheck could guard against this.
If you are letting people write to your log, you're asking for it.
They might also just drown legitimate entries with junk (cat
/dev/urandom...).
So you should lock down the logger.
I also
tags 303442 +pending
thanks
Applied in git, thanks.
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email: [EMAIL PROTECTED]
Internet: http://people.panthera-systems.net/~daniel-baumann/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
clone 488102 -1
reassign -1 debian-policy
retitle -1 make mailx a registered virtual package name
severity -1 wishlist
thanks
also sprach Russ Allbery [EMAIL PROTECTED] [2008.06.27.0212 +0200]:
Piotr Kaczuba [EMAIL PROTECTED] writes:
Before 1.2.65 logcheck depended on mailx, which was and
Package: gridengine
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates translation, proofread by the
debian-l10n-french mailing list contributors.
This file should be put as debian/po/fr.po in your package build tree.
-- System Information:
somehow kmail thought it was a good idea to include a path as text not the
actual file in the first mail.
--
Martin# translation of hyperspec_1.27_sv.po to swedish
# Translators, if you are not familiar with the PO format, gettext
# documentation is worth reading, especially sections
Package: gridengine
Severity: normal
Tags: patch
A few minor things can be enhanced in the recently added debconf templates
wording.
--- gridengine-common.templates.old 2008-06-27 09:05:37.338802089 +0200
+++ gridengine-common.templates 2008-06-27 09:07:12.842801514 +0200
@@ -1,22 +1,23 @@
Quoting Frans Pop ([EMAIL PROTECTED]):
On Friday 27 June 2008, Robert Millan wrote:
How about staging area that may be used by BIOS-based bootloaders?
Though, this description text isn't settled yet (see the other mail).
That's way too long for this dialog.
My initial comment was more
2008/6/26 Damyan Ivanov [EMAIL PROTECTED]:
tags 487648 patch
thanks
-=| Eddy Petrișor, Tue, Jun 24, 2008 at 06:17:06PM +0300 |=-
2008/6/23 Damyan Ivanov [EMAIL PROTECTED]:
As the distribution is set to UNRELEASED, the (NOT RELEASED YET)
part
brings no new data and only stands in the
# Automatically generated email from bts, devscripts version 2.10.30
# via tagpending
#
# dpkg (1.14.21) UNRELEASED; urgency=low
#
# * Thai (Theppitak Karoonboonyanan). Closes: #488090
package dselect dpkg-dev dpkg
tags 488090 + pending
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Tue, Jun 24, 2008 at 09:00:03PM +, Debian Bug Tracking System wrote:
On Tue, Jun 24, 2008 at 04:21:26PM +0200, Guido Günther wrote:
At least from the mp point of few this makes the patch as useful as not
having it at all.
Well, then lets drop it again.
Now that we're almost there
As seen in #486069, since Perl 5.10.0, embedding Perl hangs on hppa in
pthread_mutex_lock() inside perl_parse() if PERL_SYS_INIT3() hasn't been
called.
On Fri, Jun 13, 2008 at 03:07:22PM +0300, Niko Tyni wrote:
The need for PERL_SYS_INIT3() has been documented in perlembed.pod since
5.8.1
package: nut
severity: wishlist
tags: patch l10n
--
Martin# translation of nut_2.2.2-2_templates.po to swedish
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
#
# Martin Bagge [EMAIL PROTECTED], 2008.
msgid
msgstr
package: mantis
severity: wishlist
tags: patch l10n
--
Martin# translation of mantis_1.0.8-4.1_sv.po to swedish
#
#Translators, if you are not familiar with the PO format, gettext
#documentation is worth reading, especially sections dedicated to
#this format, e.g. by running:
#
Package: lynx
Version: 2.8.6-2.1
Severity: serious
Hello,
with 2.8.6-2.1 lynx stopped linking against a SSL library and thus lynx
complains when it is requested to open a https:// URL:
Alert!: This client does not contain support for HTTPS URLs.
However, the package still claims to
Hello,
Are you interested in getting business/personal loan at a negotiable
monthly interest rate this yuletide season? If yes, contact us via email:
[EMAIL PROTECTED]
Also remember to state the amount you need for the loan.
Regards,
Mr. Williams Wilcox
--
To UNSUBSCRIBE, email to
package: smbind
severity: wishlist
tags: patch l10n
--
Martin# translation of smbind.po to swedish
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
#
# Martin Bagge [EMAIL PROTECTED], 2008.
msgid
msgstr
Package: gucharmap
Version: 1:2.22.1-1
Severity: important
Any time gucharmap attempts to display codepoint U+237E it crashes with a
segfault.
I'm not sure which character specifically, but manually stepping through,
as close
to row by row as I can, it crashed with U+237E as the last_char
Hello Jelmer,
On Thu, Jun 26, 2008 at 10:43:37PM +0200, Jelmer Vernooij wrote:
bzr+ssh is only available when python-paramiko (recommended by the bzr
package) is installed. It should work once you install it.
Yes, it does, thanks!
I agree the current situation in 0.11 is a far from ideal -
severity 471828 critical
thanks
Hi Jean-Luc,
thanks for your quick testing and feedback.
I'll upload the fix today with some more things.
Arnaud
--
Linux / Unix Expert RD - MGE Office Protection Systems - http://www.mgeops.com
Network UPS Tools (NUT) Project Leader -
found 467264 2.22.1-1
thanks
2008/3/31 Eddy Petrișor [EMAIL PROTECTED]:
notfound 467264 2.22.0-1
thanks
Sjoerd Simons wrote:
On Fri, Feb 22, 2008 at 10:13:23PM +0200, Eddy Petri??or wrote:
Package: gnome-power-manager
Version: 2.20.2-3
Severity: serious
Justification: doesn't do is
Package: dlocate
Version: 0.95
Hello,
after upgrading dlocate to 0.95 I've noticed the cron.daily conffile is
marked obsolete, i.e. dlocate does not ship it anymore. However, the
changelog doesn't mention a removal of the cron.daily file but instead
it mentions changes to it. Thus I'm not sure
Hi Ari,
On Do, 26 Jun 2008, Ari Pollak wrote:
Please install pidgin-dbg and get another backtrace. Also, do you have
any plugins loaded? Does the crash still happen if you unload them?
Ok, I have tracked it down to two plugins: Only if BOTH
Buddy List Options
and
Extended
Package: dmsetup
Version: 2:1.02.26-1
Severity: wishlist
Hi,
the attached udev rule exports the information available via dmsetup
export for use by other udev rules. Since kpartx/multipath runs as
(z)60 this rule should run before that. There's some overlap with Bug
#455746.
Cheers,
-- Guido
#
Package: schroot
Version: 1.2.0-1
Severity: wishlist
With CLONE_NEWNS (a clone()/unshare() option), schroot could make all
mounts local, so the main host does not see them. The kernel would
automatically take care of all the cleanup involved in unmounting. It
could also use pivot_root() instead
reassign 312314 libgc
thanks
On Fri, Jun 27, 2008 at 2:15 AM, Aurelien Jarno [EMAIL PROTECTED] wrote:
No, it is written this is a libgc issue, not a libc issue.
--
Martin-Éric Racine
http://q-funk.iki.fi
Package: fvwm
Version: 1:2.5.26-1
Severity: normal
Although this problem looks simular to bugs #439904 and #452661 I decide
to
file separate bug report, because my investigation shows quite different
results.
If fvwm2 is started in some 8-bit locale, such as ru_RU.KOI-R,
applications, which
On Fri, 2008-06-27 at 08:38 +0200, David Härdeman wrote:
On Thu, June 26, 2008 18:39, James Westby wrote:
https://bugs.edge.launchpad.net/ubuntu/+source/cryptsetup/+bug/185380
a user had problems due to attempting to use a comment at the end of the
line in /etc/crypttab. It would be great
Package: soundkonverter
Severity: wishlist
http://www.kde-apps.org/content/show.php?content=29024
ChangeLog
0.3.8:
-Fix: compile error with gcc 4.3
-Fix: filenames containing some special characters including '?' work again
-Fix: files added by 'add directory' or via context menu from
Package: mplayer
Hi,
please don't use embedded libdvdread or libdvdnav but link against them.
For libdvdnav, we already have the new upstream from mplayer project in
Debian, so that won't give regressions; for libdvdread, it would be nice
to have the original libdvdread patched up with mplayer
Package: kwin-style-crystal
add info
1.0.6, KDE 3.5.x
http://www.kde-look.org/content/show.php/Crystal?content=13969
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: apt-cacher
Version: 1.6.4
Severity: normal
Hi,
I have the same problem as described in this post:
http://thread.gmane.org/gmane.linux.debian.user/325219
That is, apt-cacher starts twice. Once very early:
Could you tell me what links to /etc/init.d/apt-cacher there are in
package apt-cacher
forwarded 487789 [EMAIL PROTECTED]
thanks
On Tue, Jun 24, 2008 at 08:50:09AM +0200, Raúl Sánchez Siles wrote:
Package: apt-cacher
Version: 1.6.4
Severity: important
Hello:
When I start 2 aptitude sessions: one for a real system and one for a
chroot; and they
On 2008.06.27 at 08:15:07 +, Debian Bug Tracking System wrote:
Further investigation shows that Cyrillic window names are passed to the
modules correctly. I've custom module written on Tcl, and it displays
titles correctly.
But modules shipped with fvwm, such as FvwmWinList, have same
Package: wnpp
Severity: wishlist
Owner: Guido Guenther [EMAIL PROTECTED]
* Package name: ocaml-libvirt
Version : 0.4.2.4-1
* URL : http://libvirt.org/ocaml/
* License : GPL
Programming Lang: C, Ocaml
Description : OCaml bindings for libvirt
This
Riku Voipio [EMAIL PROTECTED] writes:
| aefinish: cd /srv/buildd
Other buildd:
| aefinish: cd /nonexistent
In some buildd's user doesn't have a home dir - not being able to
write there is is not a reason to fail build.
You are obviously right and the 4.24-2 package is supposed to fix
Package: apt-cacher
Version: 1.6.4
Severity: normal
Hi,
I have the same problem as described in this post:
http://thread.gmane.org/gmane.linux.debian.user/325219
That is, apt-cacher starts twice. Once very early:
Could you tell me what links to /etc/init.d/apt-cacher there are in
Package: amule-utils-gui
Version: 2.1.3-6
Severity: important
File: /usr/bin/amulegui
The program crash avery time I close a tab, if there are more tabs it
crashes when I close he last.
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging
Package: w3c-linkchecker
Version: 4.3-1
Severity: important
Good Morning,
after an install of w3c-linkchecker on my debian testing,
I tried to checklink an https website, and this failed with an error
concerning unavailable ssl lib.
I installed libcrypt-ssleay-perl, and this solved the problem.
On Fri, Jun 27, 2008 at 10:07:31AM +0200, Mario 'BitKoenig' Holbe wrote:
after upgrading dlocate to 0.95 I've noticed the cron.daily conffile is
marked obsolete, i.e. dlocate does not ship it anymore. However, the
changelog doesn't mention a removal of the cron.daily file but instead
it
Package: python2.5-doc
Version: 2.5.2-1
Severity: wishlist
Hello,
thanks for maintaining python.
The urllib documentation mentions: Proxies which require authentication
for use are not currently supported; this is considered an
implementation limitation.
What it fails to mention is that
Hi Debian people,
CAcert spend time to improve the infrastructures and policies.
you can see the progress there also : http://svn.cacert.org/CAcert/Policies/
--
with best regards,
Guillaume Romagny (fr_FR)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Package: python-sqlalchemy
Version: 0.4.6-1
Severity: normal
Hello,
I would like to use sqlalchemy to manage graph datum structures.
However, unlike sqlalchemy graph1.py example, my vertex and edge
classes inherit from enthought.traits.api.HasTraits.
When saving edges, edge attributes mapped by
Hello Loïc,
On Thu, Jun 26, 2008 at 10:33:25PM +0200, Loïc Minier wrote:
On Wed, Jun 18, 2008, Helge Kreutzmann wrote:
it just re-appeared when upgrading lintian, lsb-base, lsb-release,
lynx, manpages and po-debconf (in one apt-get install run). So it is
not solved by the reboot :-((
Am Freitag, den 27.06.2008, 13:11 +0800 schrieb Rex Tsai:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: tomboy
Version: 0.10.2-1
Severity: normal
*** Please type your report below this line ***
Hi, there is a new version (0.11.0) of tomboy released.
Please upgrade the
-=| Eddy Petrișor, Fri, Jun 27, 2008 at 10:21:52AM +0300 |=-
2008/6/26 Damyan Ivanov [EMAIL PROTECTED]:
tags 487648 patch
thanks
-=| Eddy Petrișor, Tue, Jun 24, 2008 at 06:17:06PM +0300 |=-
2008/6/23 Damyan Ivanov [EMAIL PROTECTED]:
As the distribution is set to UNRELEASED, the (NOT
On Fri, Jun 27, 2008, Helge Kreutzmann wrote:
Before doing anything else, I run that and got the following output:
/var/lib/scrollkeeper/C/scrollkeeper_extended_cl.xml:264: parser error :
Opening and ending tag mismatch: sect line 262 and title
Ah right DB corrupted, scrollkeeper-rebuilddb
Package: aspell-en
Version: 6.0-0-5.1
Severity: wishlist
Hi, Brian,
Following this thread in emacs-devel,
http://lists.gnu.org/archive/html/emacs-devel/2008-06/msg01742.html
I notice that both forms 'signaled' and 'signalled' are allowed in ispell
american dict, as well as in all american
Concerning the permissions of aliasdir, the upstream author Sam Varshavchik
wrote on June 26, 2008 on [EMAIL PROTECTED]:
If localmailfilter is enabled, world r+x is required in order for esmtpd to
access .mailfilters
So the permissions I gave to aliasdir are too tight in general. It should
On Sun, Jun 22, 2008 at 11:23:42PM +0100, Peter Stephenson wrote:
It's something to do with using the -U argument to compadd when you've
got ambiguous completions: it works fine when there's only a single
completion. It was triggered by adding the -U's to do approximation in
non-final path
On Fri, Jun 27, 2008 at 10:39:54AM +0200, Walter Franzini wrote:
Riku Voipio [EMAIL PROTECTED] writes:
| aefinish: cd /srv/buildd
Other buildd:
| aefinish: cd /nonexistent
In some buildd's user doesn't have a home dir - not being able to
write there is is not a reason to fail
Package: grub-pc
Version: 1.96+20080626-1
Severity: minor
update-grub by default uses the unicode.pff in /usr/share/grub which
isn't working for me, because my / is ext4 which grub can't
handle (yet)
Luckly it just doenst't load the gfxterm and vbe module and boots
without problems
If I remove
Package: tasksel
Version: 2.74.2
Severity: normal
Tags: patch
hotkey-setup seems not ready for mass consumption,
it recently added discover to it's dependency.
[Julien Cristau]
Why do you care what X driver is going to be used? That sounds like
a bad hack???
On Sat, Oct 20, 2007 at 06:09:38PM +0200, Andreas Tille wrote:
there exists a menu-2 format since eight years. It would be great if
the menu template would be created in this new format.
Nobody is using it. Out of the 100s of packages I have on this system
not one of them uses menu-2.
Is there
-=| Damyan Ivanov, Fri, Jun 27, 2008 at 12:10:17PM +0300 |=-
I'll see if I can fix some lintian errors/warnings before uploading.
Almost done (see changelog). What remains is:
* W: svn-buildpackage: binary-without-manpage usr/bin/svn-do
There are some examples in the code, but I guess more
Package: libpt-1.10.0
Version: lenny
When I try to install libpt-1.10.0 on debian lenny the system says
libpt-1.10.0 depends on libldap2 (= 2.1.17-1) but libldap2 is not available
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: lsb-base
Version: 3.2-12
Severity: wishlist
Tags: patch
In the control file:
# Package: lsb-base
[...]
# Depends: sed, ncurses-bin
# Replaces: lsb-core ( 2.0-6), lsb ( 2.0-6)
# Conflicts: lsb-core ( 2.0-6), lsb ( 2.0-6)
Depends: sed, ncurses-bin achieves nothing, since both packages
I'm just reviewing some old bugs and came across this one. Personally I
like having changelogs in my timezone for my packages and I believe
that a lot of other people do too.
Unless policy changes or there is a massive chorus of no change it
then I will be closing this bug.
- Craig
--
Craig
tag 487062 + pending
thanks
Some bugs are closed in revision 0
by Jonas Smedegaard (js)
Commit message:
* Update local cdbs tweaks:
+ Various updates to copyright-check.mk, most importantly relaxing
to only warn by default. Closes: bug#487062, thanks to Lucas
Nussbaum.
+ Drop
Walter Franzini [EMAIL PROTECTED] writes:
Riku Voipio [EMAIL PROTECTED] writes:
| aefinish: cd /srv/buildd
Other buildd:
| aefinish: cd /nonexistent
In some buildd's user doesn't have a home dir - not being able to
write there is is not a reason to fail build.
You are obviously right
On Fri, Oct 12, 2007 at 07:31:48PM +0200, arno renevier wrote:
it would nice to be able to access source file name in template files. I felt
that need when trying to write a template README.Debian-source for softwares
that always need to be repackaged the same way.
I don't quite understand what
Riku Voipio [EMAIL PROTECTED] writes:
[...]
Is it possible to see the build logs for 4.24-1 to verify on which
platform it failed?
http://buildd.debian.org/build.cgi?pkg=aegis
As you see, most archs now build, and the testsuite fails anymore on
arm, s390 and mips.
Thanks.
--
Walter
[Maximilian Attems]
hotkey-setup seems not ready for mass consumption,
it recently added discover to it's dependency.
Can you explain why adding a dependency on discover make it unfit for
mass consumption?
please remove it from the corresponding tasks.
Lenny should install fine everywhere
Package: anacron
Version: 2.3-13.1
Severity: grave
Justification: renders package unusable
Anacron starts with this message:
deferred while on battery power
while the laptop is not run on battery
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy:
Package: readpst
Version: 0.5.2-1
Severity: important
Hi,
Some pst are processed by readpst without error.
But, repeatedly with some pst, it crashes with this message:
Processing Folder Calendrier
debug_fp is NULL
ERROR Unknown ref_type 0x1048
Erreur de segmentation
This last line means
Package: linux-2.6
Version: 2.6.25-5
Severity: wishlist
Tags: patch
I'm not sure what's the preferred form of proposing kernel config
changes, but I'd like to propose support adding JFFS2 Summary
and Compressor support. These features are being used on many
products (such as Nokia n8x0 tablets),
On Fri, Jun 27, 2008 at 09:15:17AM +0100, Mark Hindley wrote:
On Thu, Jun 26, 2008 at 08:46:31AM +1000, Jon wrote:
Package: apt-cacher
Version: 1.6.4
Severity: normal
Hi,
I have the same problem as described in this post:
http://thread.gmane.org/gmane.linux.debian.user/325219
Package: gnunet-gtk
Version: 0.8.0~pre1-1
Severity: serious
Tags: experimental
Heya,
Building gnunet-gtk fails on my ppc buildd:
| Automatic build of gnunet-gtk_0.8.0~pre1-1 on anakreon.ayous.org by
sbuild/powerpc 98-farm
| Build started at 20080624-0959
|
Package: mzscheme
Version: 2:4.0.1-1
Severity: normal
mzscheme fails to start, with the following error message:
Welcome to MzScheme v4.0.1 [cgc], Copyright (c) 2004-2008 PLT Scheme Inc.
lib: standard-module-name-resolver: collection not found: scheme in any of:
Package: mzscheme
Version: 2:4.0.1-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
mzscheme exits with the following error if drscheme is not
installed. Apparently /usr/lib/plt/collects/scheme/ is missing
in the mzscheme package.
Welcome to MzScheme v4.0.1 [cgc],
Colin Watson wrote:
reassign 475188 network-manager
thanks
On Thu, Apr 10, 2008 at 08:44:13AM +0200, Jordi Pujol wrote:
El Wednesday 09 April 2008 18:30:15 Colin Watson va escriure:
On Wed, Apr 09, 2008 at 05:44:46PM +0200, Jordi Pujol wrote:
using NetworkManager, the script
Package: apt-listbugs
Version: 0.0.89
Severity: normal
[EMAIL PROTECTED]:/home/vlefevre# apt-get install texlive-latex-base
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
texlive-latex-base
1 upgraded, 0
Package: wnpp
Severity: wishlist
* Package name: libphp-pgq
Version : 0.2
Upstream Author : Dimitri Fontaine
* URL or Web page : http://pgsql.tapoueh.org/pgq/pgq-php/
* License : BSD
Description :
PgQ is Postgres based event processing system. It is part of
Package: frysk
Version: 0.0.1.2007.07.17-1
Severity: serious
Tags: experimental
Heya,
Building your package on my ppc buildd failed:
| Automatic build of frysk_0.0.1.2007.07.17-1 on anakreon.ayous.org by
sbuild/powerpc 98-farm
| Build started at 20080624-1022
|
On Mon, Jul 16, 2007 at 05:51:56AM +0900, Tatsuya Kinoshita wrote:
* If /usr/share/debhelper/dh_make/licenses/bsd is used for BSD
licensed works, licensing under the GPL causes that the works
cannot be combined/linked with GPL incompatible licensed works.
Combined or linked? There is a huge
Hi,
On Fri, Jun 27, 2008 at 12:25:08AM +0200, Mike Hommey wrote:
With the attached patch, it now should at least start and display some
stuff.
Yeah, that one (minus one backslash) fixed it! :-)
There may still be issues, though.
Shows the Debian homepage without problems.
I though found
Package: gnome-system-tools
Version: 2.22.0-1
Severity: normal
Tags: patch
User: [EMAIL PROTECTED]
Usertags: origin-ubuntu intrepid ubuntu-patch
Forwarded: http://bugzilla.gnome.org/show_bug.cgi?id=529228
Hi,
gnome-system-tools is unable to create groups. for details please
see
Hi,
I just noticed that I forgot to send the diff to the BTS. So here it is.
ganglia-monitor-core was successfully built everywhere so far, so it
will be back in testing soon.
--
| Lucas Nussbaum
| [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ |
| jabber: [EMAIL PROTECTED] GPG:
Package: gnome-network-admin
Version: 2.22.0-1
Severity: normal
Tags: patch
User: [EMAIL PROTECTED]
Usertags: origin-ubuntu intrepid ubuntu-devel
Forwarded: http://bugzilla.gnome.org/show_bug.cgi?id=526137
Hi,
In some situations network-admin doesn't add an auto line to
/etc/network/interfaces.
Package: diffstat
Version: 1.45-2
Severity: wishlist
File: /usr/bin/diffstat
It would be nice if I could inhibit the message when running e.g.
diffstat /dev/null
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1,
This one time, at band camp, Mr. Jan Hearthstone said:
I just reinstalled everything clamav, but
clamtk says databes older than 22 days!!
clamtk says (Help Update Signatures) Unable to retrieve updates. Try later.
I'm not really sure what clamtk is, so I'm not sure how helpful I can
be, but
On Fri, Jun 27, 2008 at 07:12:33AM +0200, Mike Hommey wrote:
On Fri, Jun 27, 2008 at 12:39:24AM +0200, Marco Delaurenti wrote:
On Thu, Jun 26, 2008 at 11:41:51PM +0200, Mike Hommey wrote:
Could you try to install iceweasel in a clean chroot and see if it still
crashes ? (If you need
Package: gnome-system-tools
Version: 2.22.0-1
Severity: minor
Tags: patch
User: [EMAIL PROTECTED]
Usertags: origin-ubuntu intrepid ubuntu-patch
Forwarded: http://bugzilla.gnome.org/show_bug.cgi?id=523180
Hi,
If the administrator has set up profiles (we do by default in Ubuntu)
then if a users
Package: bugzilla
Version: 3.0.2
Severity: normal
French version of bugzilla 3.0.2 does not allow to mark a reloved bug as
verified.
to make this line apear in the web page, I changed the code by
replacing RÉSOLU by RESOLVED in one file.
As illustrated in following patch:
---
On Fri, Jun 27, 2008 at 08:40:25PM +1000, Jon wrote:
Looks like it:
[EMAIL PROTECTED]:~0$ ls /etc/rc*.d/*apt-cacher
lrwxrwxrwx 1 root root 20 2008-06-27 20:13 /etc/rc0.d/K20apt-cacher -
../init.d/apt-cacher*
lrwxrwxrwx 1 root root 20 2008-06-27 20:13 /etc/rc1.d/K20apt-cacher -
Package: linux-image-2.6-amd64
Version: 2.6.18+6etch3
Severity: important
Using the latest debian kernel on smp 64bit systems we can see random general
protection fault: [11] SMP stack traces.
This is always related to high nfsv3 traffic (e.g. imap or pop3 services).
I attach some stack
On Fri, Jun 27, 2008 at 01:02:14PM +0200, Alexander Sack [EMAIL PROTECTED]
wrote:
On Fri, Jun 27, 2008 at 07:12:33AM +0200, Mike Hommey wrote:
On Fri, Jun 27, 2008 at 12:39:24AM +0200, Marco Delaurenti wrote:
On Thu, Jun 26, 2008 at 11:41:51PM +0200, Mike Hommey wrote:
Could you try to
Package: libpam-encfs
Version: 0.1.4.1-4
Severity: normal
I'd suggest adding warning about encfs options that makes filename
encryption path-dependent and, therefore, makes hard links unusable, which,
for home directory, causes some problems (for example, with gpg and
iceauth).
Default option is
Package: gnome-system-tools
Version: 2.22.0-1
Severity: wishlist
Tags: patch
User: [EMAIL PROTECTED]
Usertags: origin-ubuntu intrepid ubuntu-patch
Hi,
I think the description of gnome-system-tools could be improved.
Firstly, I don't understand why Bootloaders is listed, as there
doesn't seem to
On Fri, Jun 27, 2008 at 12:57:31AM +0200, Frans Pop wrote:
On Thursday 26 June 2008, Robert Millan wrote:
Should the description BIOS boot area: not also mention grub in
some way? Something like Reserve BIOS boot area for GRUB: (although
that may already be a bit long for this dialog)?
1 - 100 of 347 matches
Mail list logo