Package: conduit
Version: 0.3.17-1
Severity: minor
Hi.
Here's what I just noticed :
$ conduit
/usr/lib/conduit/modules/FacebookModule/FacebookModule.py:6:
DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
Hope this helps.
Best regards,
-- System Information:
severity 509287 serious
thanks
i am re-raising the severity of this issue so it can be appropriately
considered for the squeeze release. the lower severity ended up
effectively fizzling out the discussion (due to loss of urgency).
there has been no activity in almost two years now because of
Hi!
On Fri, 2010-08-27 at 18:16:21 -0700, Russ Allbery wrote:
Charles Plessy ple...@debian.org writes:
Actually, with the release of GNU/kFreeBSD variants for Squeeze, this
paragraph is not totally accurate.
That's a very good point.
Yeah, I was about to comment on just that but then I
Source: debian-policy
Source-Version: 3.9.1.0
Severity: wishlist
Tags: patch
Hi!
The attached patch fixes all relevant references to the Debian
distribution (or system) by removing references to the particular
GNU/Linux system.
I've left two references to Debian GNU/Linux as they are
Quoting Christian PERRIER (bubu...@debian.org):
Dear maintainer of radioclk,
On Friday, July 23, 2010 I sent you a notice announcing my intent to upload a
NMU of your package to fix its pending l10n issues, after an initial
notice sent on Tuesday, July 20, 2010.
We finally agreed that
On 26/08/10 at 08:25 +0900, akira yamada wrote:
2010/8/26 Lucas Nussbaum lu...@lucas-nussbaum.net:
That worked fine until Ruby 1.9.1, but apparently a change in Ruby
1.9.2 broke Rubygems 1.3.7. This is exhibited by two bugs:
[...]
- rubygems doesn't work:
severity 594636 minor
tag 594636 - patch
thanks
On Fri, 27 Aug 2010 23:09:26 +0200
hoareau jean pierre hoarea...@free.fr wrote:
Package: general
Severity: serious
Tags: patch
Justification: fails to build from source (but built successfully in
the past)
It appears that you are trying to
Package: installation-reports
Boot method: network (PXE/DHCP)
Image version:
http://people.debian.org/~joeyh/d-i/images/daily/netboot/
dated 20100826-03:56
# cat /var/log/installer/lsb-release
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION=Debian GNU/Linux installer
DISTRIB_RELEASE=6.0
Source: debian-policy
Source-Version: 3.9.1.0
Severity: wishlist
Tags: patch
X-Debbugs-CC: debian-h...@lists.debian.org
Hi!
Here's a draft patch to add an FHS exception for the two top-level
directories GNU/Hurd uses.
It might make sense to merge with the /sys and /selinux paragraph, and
the
On Wed, Aug 18, 2010 at 09:51:50AM +0200, Andreas Neudecker wrote:
Hi Jonathan.
Yes, the problem persists. The version of backintime and
backintime-gnome I am running is 0.9.26-4.
And yes, it is gnome-help that spawns infinite times until you kill -9
it. But this only happens in
Dear maintainer of ucf,
On Wednesday, July 07, 2010 I sent you a notice announcing my intent to upload a
NMU of your package to fix its pending l10n issues, after an initial
notice sent on Friday, July 02, 2010.
You either agreed for this NMU or did not respond to my notices.
I will now upload
Package: offlineimap
Version: 6.2.0.2-2
Severity: normal
Tags: upstream
I've tried first running notmuch as postsynchook, then echo hello and then
touch hookrun. None of them runs as far as I can tell.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990,
Package: wnpp
Severity: wishlist
Owner: Barak A. Pearlmutter b...@debian.org
* Package name: quantumminigolf
Version : 1.1.1
Upstream Author : Friedemann Reinhard friedemann.reinh...@ens.fr
* URL : http://www.sourceforge.net/projects/quantumminigolf
* License
Package: dhcpcd
Version: 1:3.2.3-6
Severity: serious
Tags: patch
User: debian-...@lists.debian.org
Usertags: kfreebsd
Hi,
the current version fails to build on GNU/kFreeBSD.
On GNU/kFreeBSD it needs the same handling as on Linux.
Please find patch bellow with tweaks.
It would also be nice if
Am Freitag, den 27.08.2010, 19:11 +0200 schrieb Joachim Reichel:
Attached is a patch to fix the problem. Hereby I announce my intention to NMU
the
package. If there are objections, let me know.
We already have this fixed in SVN. Don't NMU. We will upload soon.
Regards, Daniel
--
To
Package: gmail-notify
Version: 1.6.1.1-1
Severity: important
I just happened to look in the .notifier.conf file that gmail-notify keeps in
my home directory and noticed that it was storing my password in plain text. I
had assumed it would be stored somewhere in some encrypted form.
Ideally this
Package: totem-mozilla
Version: 2.30.2-2+b1
Severity: important
How to reproduce it: load a video from a slow source and start playing it
immediatly when the plugin is loaded.
The video stops when the end of buffered part is reached and that is
inevitable.
The issue is that you can't go over if
Package: totem-mozilla
Version: 2.30.2-2+b1
Severity: wishlist
I wish that totem-mozilla provide an indication of the buffering progress cause
it is a very useful information for a streaming plugin.
Thanks
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy:
Package: airstrike
Version: airstrike-0.99+1.0pre6a
Tags: patch
As per https://bugs.launchpad.net/hundredpapercuts/+bug/602703 I have
removed mention of 'network play'. Debdiff is attached.
Thanks.
airstrike_0.99+1.0pre6a-4ubuntu1.debdiff
Description: Binary data
Package: abe
Version: 1.1-3
Tags: patch
Hi,
The file 'debian/control' is used by Ubuntu's Software Centre to display
information about a given package to the user. The line This package
contains the architecture dependent file of the game is thus displayed
along with the other game information,
Package: apt
Version: n/a
Tags: l10n, patch
Severity: wishlist
Updated Portuguese translation for apt's debconf messages.
Translator: Miguel Figueiredo el...@debianpt.org
Feel free to use it.
For translation updates please contact 'Last Translator' or the
Portuguese Translation Team traduz _at_
Package: gecko-mediaplayer
Version: 0.9.9.2-1
Severity: normal
I don't know how to provide useful data for debugging it but it seems to be an
issue not related to my machine (it happens on all of my computers).
How to reproduce it: I don't know if some other video format or website cause
that
On Fri, Aug 15, 2008 at 12:31:54PM +0200, J.H.M. Dassen (Ray) wrote:
tags 493881 + upstream
forwarded 493881 http://bugzilla.gnome.org/show_bug.cgi?id=547893
AFAICT, this upstream is a duplicate of
https://bugzilla.gnome.org/show_bug.cgi?id=530589, which seems to be active.
It seems that
Package: gecko-mediaplayer
Version: 0.9.9.2-1
Severity: normal
How to reproduce it: simply load that link
http://www.jamendo.com/get2/stream/track/m3u/?track_id=591584order=trackno_asc
or try to play any other song in Jamendo website.
It start to reproduce the file but it stops few seconds after
Package: sofa-framework
Version: 1.0~beta4-4
Tags: patch
Hi,
As per https://bugs.launchpad.net/hundredpapercuts/+bug/605497 I have
changed 'Categories' in debian/sofa.desktop from 'Graphics' to 'Science' and
submit a debdiff for your consideration. A change of category would ensure
the
tags 567876 pending
thanks
On 2010-08-18 Andreas Metzler ametz...@downhill.at.eu.org wrote:
On 2010-08-17 Philipp Kern pk...@debian.org wrote:
On Mon, Feb 01, 2010 at 07:11:58PM +0100, Andreas Metzler wrote:
Looks like restricting the error to main_log is the right thing to do.
could we
On Wed, Aug 25, 2010 at 05:44:32AM +0100, Ben Hutchings wrote:
On Tue, 2010-08-24 at 16:55 +0100, Colin Watson wrote:
Actually, what I want is a consistent way to disable bootloader
invocation for all bootloaders, without necessarily requiring the
bootloader package not to be installed
Dear Ben,
It seems that the kernel without firmware is not able to load any
module. Probably, because the device I am using is 083a:a701 !! . Here
is the answer of the things you asked for (after dpkg --purge
firmware-ralink ):
readlink /sys/class/net/wlan0/device/driver
Package: wnpp
Severity: wishlist
Owner: Roy Marples r...@marples.name
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marples r...@marples.name
* URL : http://roy.marples.name/projects/dhcpcd
* License : BSD-2
Programming Lang: C, Shell
Le Sat, Aug 28, 2010 at 05:52:07PM +0930, Spam Prevetion a écrit :
Package: sofa-framework
Version: 1.0~beta4-4
Tags: patch
Hi,
As per https://bugs.launchpad.net/hundredpapercuts/+bug/605497 I have changed
'Categories' in debian/sofa.desktop from 'Graphics' to 'Science' and submit a
Package: ikiwiki
Version: 3.20100815
Severity: normal
Tags: l10n
Hi,
Attached is an updated danish l10n for ikiwiki code.
Kind regards,
- Jonas
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel:
Hi Markus,
You in the past told me that there was only bugfixes in the 0.8.3. In
fact, that's wrong, there's also an ABI change in the error codes. See here:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594607
As a consequence, I had to revert my upload to Debian SID, so that if
there is
owner 563974 Roy Marples r...@marples.name
thanks
On Sat, 28 Aug 2010 09:37:35 +0100, Roy Marples wrote:
On Tue, 2010-08-24 at 20:53 +0100, Simon Kelley wrote:
3) Close bug #563974 in dhcpcd-dbus changelog. (Check with David Paleino
that he's happy for us to do that - it's his bug.)
OK
On Fri, Aug 27, 2010 at 07:08:08PM -0400, Felipe Sateler wrote:
AFAIK, the current version of dpkg in stable supports symbols files, so
I think it is time we loosen the requirement for shlibs files when
symbols files are present.
Requiring shlibs when there is a symbols file also is
On Mon, Aug 23, 2010 at 12:44:59PM +0200, Michal Simunek wrote:
Jonathan Wiltshire píše v So 21. 08. 2010 v 11:29 +0100:
languagetranslated fuzzy untranslated
-
pt_BR 1 2
ru
Package: backuppc
Severity: normal
A good solution I found is to add
precedence :::0:0/96 100
to /etc/gai.conf. This will make the host generally prefer v4 over
v6 connections, which makes a lot of sense for a machine running
backups over the network.
-- System Information:
Debian
Hi Romain,
On 26/08/10 14:06, Romain Lerallut wrote:
It seems that the patches in debian/patches are not applied when building the
package. Anyway, the url.py file is not patched and the problem persists.
Can you please confirm that it is now fixed in 1.6.2-2?
Thanks,
Javi (Vicho)
Package: pcmanfm
Version: 0.9.7-1
Severity: wishlist
Tags: upstream
PCManFM appears as File Manager in menus, it should be PCManFM.
I'm using e17 which already have a file manager, so in my case PCManFM's name
could me misleading.
-- System Information:
Debian Release: squeeze/sid
APT prefers
Dear Ben,
After reconfiguring kernel and rebooting and so on, results are
different (??). Here is the answer:
readlink /sys/class/net/wlan0/device/driver
---
--- (nothing)
/sbin/modinfo rt2870sta
---
filename:
Am 28.08.2010 10:35, schrieb Roy Marples:
Package: wnpp
Severity: wishlist
Owner: Roy Marplesr...@marples.name
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marplesr...@marples.name
* URL : http://roy.marples.name/projects/dhcpcd
* License
Package: apt-xapian-index
Version: 0.38
Severity: normal
It is my understanding that the apt-xapian-index database is a cache
of existing data. I.e. there are not data stored in the database
that could not be recreated automatically.
If this is the case, then the database should be moved from
Package: dchroot
Version: 1.4.10-2
Severity: grave
Tags: sid
Justification: renders package unusable
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Package: linux-image-2.6-amd64
Version: 2.6.32+27~bpo50+1
Severity: normal
Hi,
I have an eeepc 1201n with debian stable lenny+backports. So I'm using
the kernel 2.6.32-bpo.5-amd64. The Ethernet controller is driven by
the module atl1c. I'm using firestarter as firewall.
I have a file transfer
Hello!
I've used http://people.skolelinux.org/~pere/debian-upgrade-testing/upgrade-test
to try to reproduce the bug you reported but have failed.
I've done:
* manual debootstrap lenny, install fontconfig-config,
select desktop (gnome) task, upgrade to squeeze.
* run upgrade-test script and
Hi,
This one is a bit irksome for folks trying to make a stripped down
rootfs to fit on small read-only file systems too. You'd make a
lot of people happy if this could be fixed for squeeze.
Thanks!
Ron
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Package: hylafax-client
Version: 2:6.0.4-10
Severity: normal
There's no subdir gs.d under path /var/lib/defoma/ at all.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU
Package: lintian
Version: 2.4.3
W: gcc-4.4-hppa64: apparently-corrupted-elf-binary
./usr/lib/gcc/hppa64-linux-gnu/4.4.5/crtbegin.o
W: gcc-4.4-hppa64: apparently-corrupted-elf-binary
./usr/lib/gcc/hppa64-linux-gnu/4.4.5/crtbeginS.o
W: gcc-4.4-hppa64: apparently-corrupted-elf-binary
[Andreas Henriksson]
It would be nice if you could provide a diff, md5sum, or something
that could indicate what have changed.
Sorry, all I have kept is the log file. The chroots are deleted
automatically. I do notice the problem was no longer present
2010-08-01, at least not according to the
On Sat, Aug 28, 2010 at 11:25:36AM +0200, Benjamin Lecouteux wrote:
Package: dchroot
Version: 1.4.10-2
Severity: grave
Tags: sid
Justification: renders package unusable
~$ dchroot
E : basic_string::_S_construct NULL not valid
The testing and stable versions are working perfectly
It's
I observed the same behavior with LDAP, and I think this is intentional.
If there are too many users, as is generally the case with remote NSS
modules, it is useless to list them all. However, once a user has logged
on, it should appear since it is part of the recent users list. If it
does not,
On Sat, 2010-08-28 at 11:19 +0200, Patrick Matthäi wrote:
Am 28.08.2010 10:35, schrieb Roy Marples:
Package: wnpp
Severity: wishlist
Owner: Roy Marplesr...@marples.name
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marplesr...@marples.name
* URL
Package: nss-pam-ldapd
Severity: wishlist
Tags: l10n patch
Hi,
Please find attached the updated Swedish debconf templates translation.
Thanks for the extra time to complete this. It's much appreciated.
Take care,
Martin
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT
Package: cdimage.debian.org
Severity: normal
openoffice.org-kde package is not installed automaticly installing from the the
Squeeze KDE CD
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP
Hello Yves-Alexis
The same behaviour was observed at the following computer:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo CLE266]
[1106:3123]
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]:
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Please unblock package gdebi
It fixes two important bugs (#591306 and #593647), the only feature
added is a check to remember auto-close status when installation is over.
The rest of the
Am 28.08.2010 12:11, schrieb Roy Marples:
dhcpcd is a one stop IPv4 network management daemon which includes
It only supports IPv6?
Only IPv4 at present.
IPv6 support, at least for RA is planned for the next major version,
possibly with support for the experimental RFC5006 (DNS in IPv6
tags 594679 + pending
thanks
On Sat, 2010-08-28 at 12:24 +0200, Martin Ågren wrote:
Please find attached the updated Swedish debconf templates translation.
Thanks for the updated translation. It will be in the next release.
Thanks for the extra time to complete this. It's much appreciated.
* Alex Volkov avol...@gmail.com, 2010-08-27, 16:03:
Okay, I have the same situation and can reproduce the bug.
[...]
So I poked around in those files and didn't find anything out of
ordinary. On my system by default variable PYSNMP_API_VERSION is unset,
I've tried setting it, verify that by
On Sat, Aug 28, 2010 at 09:35:29 +0100, Roy Marples wrote:
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marples r...@marples.name
* URL : http://roy.marples.name/projects/dhcpcd
* License : BSD-2
Programming Lang: C, Shell
got today abort: authorization failed with 1.6.2-2 :|
2010/8/28 Javi Merino cibervi...@gmail.com
Hi Romain,
On 26/08/10 14:06, Romain Lerallut wrote:
It seems that the patches in debian/patches are not applied when building
the
package. Anyway, the url.py file is not patched and the
On Sun, Aug 15, 2010 at 08:56:46PM +0100, Adam D. Barratt wrote:
On Sun, 2010-08-15 at 16:13 +0100, Dominic Hargreaves wrote:
To the untrained eye, the diff between
6732c0e8ccb4d57d6a970973f994a9d2d3509def
and
3b2738befa7fe934d0d55b77fe1fcf28aafbe424
in upstream git is what's
Hi
just to include more details, this bug is cause of FTBFS of Gammu:
https://buildd.debian.org/build.cgi?pkg=gammu;ver=1.28.90-1
All test suites fail with:
/usr/lib/dbd/libdbdsqlite3.so: undefined symbol: _dbd_parse_datetime
libdbi: Failed to load driver: /usr/lib/dbd/libdbdsqlite3.so
So it
Sadly adding lines you've sent me did not work at all. No difference. (I've
just copied radeon.ko from freshly compiled kernel to working one). I did
the same using patch #2 saying that add just return. Slight progress has
been made. I could reboot OS via kernel-call altGr+sysrq+b (?).
No change
On Aug 28, Stefan Fritsch s...@sfritsch.de wrote:
I don't see any change from 3.44-1 (lenny) to 3.48-1 (squeeze). Maybe
you have accidentally deleted it.
I am quite sure that I did not, but I cannot investigate this further.
--
ciao,
Marco
signature.asc
Description: Digital signature
Package: wnpp
Severity: wishlist
Package name: wally
Version : 2.4.0
Upstream Author : Antonio Di Monaco (a.k.a. Sin(x) '76) t...@becrux.com
URL : http://www.becrux.com/index.php?page=projectsname=wally
License : GPL2
Programming Lang: C++,QT4
Package: flashplugin-nonfree-extrasound
Severity: important
flashplugin-nonfree is now available for x86_64 architectures, but this package
is not - getting sound out of flash is thus quite complicated on x86_64 systems.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
Package: xserver-xorg-video-siliconmotion
Version: 1:1.7.4-1
Severity: important
*** Please type your report below this line ***
I use a Yemote YeeLoong MIPS-based netbook:
http://wiki.gnewsense.org/Projects/Lemote#toc17
I use the extra staging (kernel) driver sm7xx to be able to use the console
Package: xneur
Version: 0.9.9-1
Severity: important
Xneur crashes unexpectedly. It starts and works fine for a while (from 5 to 15
minutes I think) but then crashes. Here is the bugtrace from the terminal
emulator:
ge...@debian:~$ xneur
On Sat, Aug 28, 2010 at 11:50:49 +0100, Dominic Hargreaves wrote:
On Sun, Aug 15, 2010 at 08:56:46PM +0100, Adam D. Barratt wrote:
On Sun, 2010-08-15 at 16:13 +0100, Dominic Hargreaves wrote:
To the untrained eye, the diff between
6732c0e8ccb4d57d6a970973f994a9d2d3509def
and
On 08/28/2010 12:44 PM, Julien Cristau wrote:
On Sat, Aug 28, 2010 at 09:35:29 +0100, Roy Marples wrote:
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marples r...@marples.name
* URL : http://roy.marples.name/projects/dhcpcd
* License :
Package: backuppc
Version: 3.1.0-9
Severity: wishlist
Tags: upstream
$Conf{CgiUserUrlCreate} defaults to 'mailto:%s'. However, if
$Conf{EMailUserDestDomain} is defined, then it makes sense to
include that in the default setting.
I suggest to move away from printf-style substitution and instead
Package: openssh-client
Version: 1:5.6p1-1
Severity: normal
Since switching on ControlPersist, I have dozens of defunct ssh
processes in the process table, e.g.:
madduck 28025 0.0 0.0 40612 2784 pts/8S+ 09:17 0:00 ssh pulse
madduck 28028 0.0 0.0 0 0 pts/8Z+
tags 472377 pending
thanks
On 2010-08-21 Andreas Metzler ametz...@downhill.at.eu.org wrote:
[...]
suggested patch attached. I used ( 1.10) since scribble 1.10-1 replaced
scrabble 1.9-1.
I intend to make a NMU with the attached patch to delayed-10 days next
weekend, unless somebody asks me
Package: oping
Version: 1.4.0-1
Severity: wishlist
Tags: upstream
Even though oping seems to be using getaddrinfo(3) already, it does
not appear to make use of or respect /etc/gai.conf.
By default then, if a host has both and A records, oping would
use IPv6 over IPv4. If one wanted it the
tags 593371 + unreproducible
severity 593371 important
thanks
* Victor Rosales todoesve...@gmail.com, 2010-08-20, 09:11:
Let me give you some more info of the enviroment. I'm running a gnome
desktop
trhu VNC connected using RealVNC.
The strange thing is if I connect to the debian squeeze using
Hi,
We've had a request[1] to upgrade hex-a-hop in Debian to your version
but it was noticed[2] that it unfortunately contains some non-free
parts. It would be great if you could split the non-free parts out into
a separate tarball so the main source tarball can be included in Debian.
All the
On Fri, Aug 27, 2010 at 09:20:42PM -0700, Russ Allbery wrote:
Andrew McMillan and...@morphoss.com writes:
On Fri, 2010-08-27 at 18:06 -0400, CJ Fearnley wrote:
The DFSG defines freedom in software licenses, but doesn't provide a
statement of assurance to users. Maybe a statement that
also sprach martin f krafft madd...@debian.org [2010.08.28.1102 +0200]:
A good solution I found is to add
precedence :::0:0/96 100
to /etc/gai.conf. This will make the host generally prefer v4 over
v6 connections, which makes a lot of sense for a machine running
backups over the
Package: apt
Version: 0.8.0
Severity: important
Hello,
since todays upgrade (apt 0.7.25.3 - 0.8.0) autoremove is broken.
apt-get install debhelper installs debhelper and po-debconf,
po-debconf is added to /var/lib/apt/extended_states with
Auto-Installed: 1. However after apt-get remove
tags 594677 + confirmed fixed-upstream pending
thanks
On Sat, Aug 28, 2010 at 11:07:51AM +0100, Roger Leigh wrote:
On Sat, Aug 28, 2010 at 11:25:36AM +0200, Benjamin Lecouteux wrote:
Package: dchroot
Version: 1.4.10-2
Severity: grave
Tags: sid
Justification: renders package unusable
HI,
I wonder why this package wasn't updated before. 2.4.5 is more than one year
old.
There is even 2.4.10 now.
Cheers,
André
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
On Thu, Aug 19, 2010 at 18:59:13 +0100, Julien Cristau wrote:
On Thu, Aug 19, 2010 at 19:25:45 +0200, Micha Lenk wrote:
Hi Release Team,
Julien Cristau wrote:
On Thu, Aug 19, 2010 at 10:06:31 +0200, Micha Lenk wrote:
Please see the attached debdiff of the changes that I would like
Package: linux-2.6
Severity: wishlist
Tags: patch
I manage a machine that has a LSI SAS controller, reported by lspci as
LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev
08) (lsiutil says model LSI Logic SAS1068E B3, firmware 1.26.00).
With the squeeze kernel, I can trigger a
Package: python-profiler
Version: 2.6.6-1
Severity: important
| Setting up python-profiler (2.6.6-1) ...
| Traceback (most recent call last):
| File py_compile.py, line 170, in module
| sys.exit(main())
| File py_compile.py, line 162, in main
| compile(filename, doraise=True)
| File
On Sat, Aug 28, 2010 at 01:16:29PM +0200, Julien Cristau wrote:
On Sat, Aug 28, 2010 at 11:50:49 +0100, Dominic Hargreaves wrote:
On Sun, Aug 15, 2010 at 08:56:46PM +0100, Adam D. Barratt wrote:
On Sun, 2010-08-15 at 16:13 +0100, Dominic Hargreaves wrote:
To the untrained eye, the diff
Package: backuppc
Version: 3.1.0-9
Severity: minor
The /etc/backuppc/htgroup file has no real purpose. The group
membership information is not externalised, and backuppc uses
/etc/group anyway. Since the apache htaccess configuration in
/etc/backuppc/apache.conf also uses Require valid-user, the
On Sat, Aug 28, 2010 at 00:36:31 +0200, Cesare Leonardi wrote:
I've also tried (don't know if it make sense) with
2.6.34-1~expermental.2, always with i915.modeset=0: same freeze.
OK, it's starting to sound like this 'legacy' experiment is a failure so
far.
On my 945GM, legacy crashes on UMS
Package: imagemagick
Version: 7:6.3.7.9.dfsg2-1~lenny3
Severity: normal
$ convert -strip 1x1_.png 1x1.png
$ ls -lh 1x1*
-rw-r--r-- 1 hramrach hramrach 85 2010-08-28 14:07 1x1_.png
-rw-r--r-- 1 hramrach hramrach 184 2010-08-28 14:09 1x1.png
-- System Information:
Debian Release: 5.0.5
APT
Package: apt
Version: 0.8.0
Severity: normal
Hi,
I collect apt-sources.lists which I don't use at the moment in a
sub-dir called on_hold:
# LC_ALL=C ls -lR /etc/apt/sources.list.d/
/etc/apt/sources.list.d/:
total 8
-rw-r--r-- 1 root root 328 Jul 24 23:57 debian.list
drwxr-xr-x 2 root root 4096
Miklos Szeredi a écrit :
Please do echo t /proc/sysrq-trigger and post the stack traces
from the dmesg output.
Unfortunately, even with debug symbols in both kernel and sshfs, I can
not get a resolved trace. (and gdb hangs when trying to interrupt sshfs
- probably because the program is
On Sat, 2010-08-28 at 13:13 +0200, Mehdi Dogguy wrote:
On 08/28/2010 12:44 PM, Julien Cristau wrote:
On Sat, Aug 28, 2010 at 09:35:29 +0100, Roy Marples wrote:
* Package name: dhcpcd5
Version : 5.2.7
Upstream Author : Roy Marples r...@marples.name
* URL :
On Sat, 2010-08-28 at 12:33 +0200, Patrick Matthäi wrote:
Am 28.08.2010 12:11, schrieb Roy Marples:
dhcpcd is a one stop IPv4 network management daemon which includes
It only supports IPv6?
Only IPv4 at present.
IPv6 support, at least for RA is planned for the next major version,
tags 594192 + patch
thanks
* Guido Trotter ultrot...@debian.org, 2010-08-24, 14:35:
Processing triggers for python-support ...
Compiling /usr/lib/pymodules/python2.4/flashbake/git.py ...
File /usr/lib/pymodules/python2.4/flashbake/git.py, line 35
class Git():
^
SyntaxError:
Package: munin-node
Version: 1.4.5-2
Severity: minor
Opening this bug following [1], [2]:
From [1]:
-
The fw_conntrack plugin reports a wildly incorrect value for
total.warning and total.critical:
# cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max
65536
#
Package: firehol
Version: 1.273-1
Severity: normal
Tags: patch
The patch Adrian Bridgett attached to this bug possibly applies to some
older version of the package. The patch attached here
(get-iana.583176.patch) applies to the current unstable version.
The second attached patch, posixification
Package: oping
Version: 1.4.0-1
Severity: normal
Tags: upstream
oping does not communicate ping failure to the calling process like
the other ping tools do. Especially in the presence of the -c
option, oping should really exit non-zero if more than half the
pings fail.
Compare:
shelter:~% ping
[Matthias Klose, 2010-08-28]
Version: 2.7-1
On 28.08.2010 13:58, Piotr Ożarowski wrote:
note that I have python2.7 installed, but python-prifiler package doesn't
provide this file for Python 2.7 so postinst has to check if the file exist
first
if you install python2.7 from experimental,
Package: imagemagick
Version: 8:6.6.0.4-2.2
Severity: normal
$ convert 1x1_.png -strip 1x1.png
$ ls -lh 1x1*
-rw-r--r-- 1 hramrach hramrach 85 2010-08-28 14:07 1x1_.png
-rw-r--r-- 1 hramrach hramrach 282 2010-08-28 14:18 1x1.png
-- System Information:
Debian Release: 5.0.5
APT prefers
On 19.08.06 Roland Lezuo (e0227...@student.tuwien.ac.at) wrote:
Package: tetex-bin
Version: 3.0-18
Severity: important
After converting a file including lots of eps files dvips dies with
this message: File size limit exceeded File size is 2147483647
bytes.
Could you check if the bug is
Package: linux-image-2.6.32-5-xen-amd64/xen-hypervisor-4.0-amd64/udev
Version: 2.6.32-5/4.0.1-rc5/160
The curent Squeeze Xen versions do not work with the current Squeeze udev
version. Paravirtualised guests do not autostart. In other words, after
creating DomUs with xen-create-image and xm
1 - 100 of 266 matches
Mail list logo