Chris Lamb wrote:
> > I'll dig in a bit more and see if I can fix libeatmydata, but it might
> > end up being too invasive and time consuming. I'll send another message
> > once I know more.
>
> Oh, nice analysis so far. Sounds like that needs to get (at least
> copied...) upstream at the
Package: open-infrastructure-ceph-tools
Version: 20180915-2
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package fails to upgrade from
'testing'.
It installed fine in 'testing', then the upgrade to 'sid' fails
because it
Source: r-cran-natserv
Version: 0.3.0+dfsg-1
Severity: serious
https://ci.debian.net/packages/r/r-cran-natserv/unstable/amd64/
...
autopkgtest [20:57:22]: test run-unit-test: [---
BEGIN TEST test-all.R
R version 3.5.2 (2018-12-20) -- "Eggshell Igloo"
Copyright (C) 2018 The R
Hi,
just for the record, I tried to reproduce the build failure on eller
(mipsel porterbox), but it builds fine there. I'm wondering whether the
timeout set on line 232 of tests/srp.c (40 seconds) is too short for
slower build hosts.
Willi
Hi,
Please note that the issues raised have been mostly dealt with. There is a
man page, the descriptions in the control file have been changed, the
copyright has been updated, and now usr/bin/brightness-controller calls an
interpreter.
Thanks,
Archisman
On Wed, Jan 23, 2019, 12:35 AM Archisman
على ٢٨/٥/١٤٤٠ هـ ١:٥٧ ص، كتب Afif Elghraoui:
> Control: subscribe -1 !
>
silly me--- I mistook this for a control command since I usually use
devscripts' `bts subscribe ...`.
Never mind my previous message and apologies for the noise.
regards
Afif
--
Afif Elghraoui | عفيف الغراوي
I am able to decrypt the partition outside of a VM without the rescue
"CD". Since I can also decrypt using the installer CD as rescue, this
means the failure is specific to booting via grub and initrd.
This seems to indicate the installer created the encrypted partition
properly but the boot
On 2019-02-02 Thorsten Glaser wrote:
> Package: mcabber
> Version: 1.1.0-1.1
> Severity: serious
> Tags: ipv6
> Justification: fails release goal
> I’m currently in the FOSDEM WLAN (IPv6-only, not FOSDEM-legacy),
> and I can neither connect to the Jabber server with SRV RRs nor
> when hardcoding
Package: kerneloops
Version: 0.12+git20140509-6
Severity: normal
File: /lib/systemd/system/kerneloops.service
Usertags: warnings
The ExecStartPre option in kerneloops.service uses the non-existent
kerneloops --test command-line option. This causes systemd to print a
notice message to the journal
Control: subscribe -1
Hello,
I was just about to file a bug about this and found it already existing.
The way I was hoping this could work is that Uploaders are automatically
subscribed. I don't know of any reason why an Uploader should not be
following their packages. I think it would also
On Sat, Feb 02, 2019 at 01:40:18PM +0900, Charles Plessy wrote:
> Le Fri, Sep 14, 2018 at 10:19:31AM -0700, Josh Triplett a écrit :
> >
> > Browsers require WebAssembly files to get served with the proper MIME
> > type, application/wasm. To help web servers such as the one in Python,
> > which
Cyril Augier writes:
> Package: fonts-fantasque-sans
> Version: 1.7.1~dfsg-1
> Severity: important
>
> Hi !
>
> According to the issues on Github, the problem is solved in the higher
> versions.
>
> I installed the latest version from GitHub and it works perfectly.
Which version did you check
Package: alsa-utils
Version: 1.1.7-1
Severity: wishlist
After installing pulseaudio, alsamixer looks like this,
lq AlsaMixer v1.1.7
qqk
x Card: PulseAudio
Package: hexchat
Version: 2.14.2-3
Severity: important
Dear Maintainer,
I was away from the computer for hours. When I returned and tried to
play music, I saw the following in /var/log/syslog:
Feb 2 20:10:30 bonnet pulseaudio[1276]: E: [alsa-sink-ALC1200 Analog]
alsa-sink.c: Error opening
Package: octave
Version: 4.4.1-4
Severity: grave
X-Debbugs-CC: debian-scie...@lists.debian.org, ido...@neto.net.il
Dear octave maintainer,
I received an astonishing bug report[1] saying that MKL returns wrong
result for matrix multiplication. However, my further investigation
suggests that the
On Fri, Feb 01, 2019 at 09:59:46AM +0100, Nicolas Cavallari wrote:
> A recent pulseaudio upgrade broke the ALSA configuration. Since this
> machine seldom needs to play sounds, this is a minor problem.
>
> However, as a result, Enlightenment SEGVs on load. Trying to restart
> it with F1 does
Package: src:qttools-opensource-src
Version: 5.11.3-4
llvm is available on all mips r6 ports.
Please build-dep on llvm also for them:
mipsr6 mipsr6el mips64r6el mips64r6 mips64
--
YunQiang Su
I've done some more research, and come up with more details.
As I understand it, the original X-COM for DOS was released as version
1.0, then had a bunch of fixes up to version 1.4. Later, a "collector's
edition" was released which ported the game to Windows and included even
more fixes.
Package: exim4-daemon-light
Version: 4.92~RC5-1
For the last two upgrades,
/var/log/exim4/paniclog:
2019-02-02 21:47:07 socket bind() to port 25 for address (any IPv6) failed:
Address already in use: daemon abandoned
As we see from timestamps, it is upgrade related.
# ls -dog
Package: sponsorship-requests
Severity: wishlist
Dear mentors,
I am looking for a sponsor for my package "austin"
* Package name: austin
Version : 0.6.1-beta-1
Upstream Author : Gabriele N. Tornetta
* URL : https://github.com/P403n1x87/austin
* License :
Package: wnpp
Severity: wishlist
* Package name: scenarist
Version : 0.7.2
Upstream Author : Дмитрия Новикова (Dmitry Novikov)
* URL : https://kitscenarist.ru/en/
* License : GPL
Programming Lang: C++ (Qt)
Description : KIT Scenarist – screenplay
Package: wnpp
Severity: wishlist
Owner: Debichem Team
* Package name: votca-xtp
Version : 1.5.0
Upstream Author : Christoph Junghans and others
* URL : http://www.votca.org/
* License : Apache 2.0
Programming Lang: C++
Description : Exciton transport
Package: ruby-sinatra
Version: 2.0.5-4
Severity: normal
Tags: patch
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu disco ubuntu-patch
The latest ruby-sinatra package build-depends on ruby-sinatra-contrib and
ruby-rack-protection, but these are binary packages built from this very
Package: pam
Version: 1.1.8-3.6
Followup-For: Bug #778664
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu disco ubuntu-patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
The patch fixes the issue, please see LP bug 1666203.
Following fix was
Hi,
On Mon, 21 Jan 2019 15:00:11 -0800 Vagrant Cascadian wrote:
> Package: u-boot-exynos
> Version: 2019.01+dfsg-1
> Severity: important
>
> Upstream reverted a patch that was present in all v2018.x u-boot
> versions that sets the console variable to include the console=
> argument, so boot
On Sat, 2019-02-02 at 22:11 +0100, Christian Franke wrote:
> The script creates a temporary gpg homedir, imports the key,
> verifies
> the file and then removes the gpg homedir. See function gpg_verify().
Seems you're right... as I've said previously I only had a very short
glance over the
Hi Hans,
On Sat, Feb 02, 2019 at 11:24:36PM +0100, Hans van Kranenburg wrote:
> When working on actually shipping systemd units we'd really need
> to have a group of users that want to actively help testing
> everything. Downgrade, upgrade, try to break it etc...
I actually ended up going from
Source: vkd3d
Version: 1.1-2
Severity: normal
[resend to the bts]
Hi Mike
On 02.02.19 08:56, Michael Gilbert wrote:
> On Fri, Feb 1, 2019 at 10:38 PM Jens Reyer wrote:
>> vkd3d has no runtime dependency on libvulkan1 or any other vulkan
>> related packages. So with the currently existing
Control: tags -1 patch
The error is
In file included from FatBoundary.cpp:25:
./FEMDiscretization.hpp:647:7: error: too many template-parameter-lists
class FEMDiscretization
^~~~
Fix:
Description: Use correct syntax for partial
So I have sbuild working now with no lintian error for 1.3.1-1
How can we turn it into an actual debian package/what are the next steps?
https://github.com/fortio/fortio/releases/tag/v1.3.1
Thanks
Laurent
Hi Andy,
Just to set expectations... Ian is not using systemd at all, and for me,
the current whatever init script stuff there is does its thing for my
usecase at work. I don't use xendomains, I use live migrate to drain
physical servers so I can reboot / upgrade / whatever them without any
need
Package: php7.3-common
Version: 7.3.1-2
Severity: normal
Hi!
The change for "#916110 php7.3: Please use pkg-config to detect icu"
seems to cause a regression, because since then PHP throws errors like
this:
Feb 02 22:39:03 server sessionclean[3281181]: PHP Warning: PHP Startup: Unable
to load
Source: gnutls28
Version: 3.6.6-2
Severity: serious
Justification: FTBFS
Hi
gnutls28/3.6.6-2 FTBFS on mipsel:
https://buildd.debian.org/status/fetch.php?pkg=gnutls28=mipsel=3.6.6-2=1549113962=0
apparently a failing test, not sure if it was already know, so
filling the bug for tracking the
Package: glade
Version: 3.22.1-3
Severity: normal
Dear Maintainer,
while trying to find a way to add a GtkStatusbar on a window, no relative
selection is found on Glade's GUI
A web search revealed https://gitlab.gnome.org/GNOME/glade/issues/302 which in
short informs that:
a. the GtkStatusbar
Control: tags -1 upstream patch
Control: forwarded -1 https://github.com/clMathLibraries/clSPARSE/pull/210
fix for this:
Description: Remove unused and unbuildable GetTypecode
This template function is unused (not in any public headers and
not called from within clSPARSE), and has always been
Packaging moved to https://salsa.debian.org/efi-team/libxmlb/tree/debian
> -Original Message-
> From: Limonciello, Mario
> Sent: Monday, January 28, 2019 8:44 PM
> To: 920...@bugs.debian.org
> Subject: Bug#920777: Acknowledgement (ITP: libxmlb -- XML binary library)
>
>
> [EXTERNAL
Control: severity -1 normal
Hi,
please install python3-nbxmpp 0.6.9-1 from testing, then it will be OK.
The gajim package is still missing the correctly versioned
dependency, but it's solved in git since ten days:
Hi,
We aim to have a working pygrub in Buster, regardless of the fact that
using grub2-based boot images is the prefered upgrade path.
This issue is on our Buster TODO list:
https://salsa.debian.org/xen-team/debian-xen/issues/24
Hans
Hi,
This issue is on our Buster TODO list:
https://salsa.debian.org/xen-team/debian-xen/issues/24
Hans
Hi,
Thanks for your report.
FYI Actually fixing this is on the TODO list for Buster:
https://salsa.debian.org/xen-team/debian-xen/issues/24
It's true that in order to have xendomains restore things after reboot,
the network bridge has to be functional, so it's clear that this has to
be fixed.
Package: nextcloud-desktop
Version: 2.5.1-1
Followup-For: Bug #920984
I can confirm this with XFCE. That is the same issue I filed against the
owncloud-client.
Building the package with libsecret installed, solved it. I know, there is no
dependency
on libsecret, but it worked.
Regards
Thomas
Package: ftp.debian.org
Severity: normal
os-autoinst (4.5.1527308405.8b586d5-4) unstable; urgency=medium
* debian/control
- just build for i386 and amd64 for now...
-- Hideki Yamane Sun, 06 Jan 2019 15:22:32 +0900
Package: mcabber
Version: 1.1.0-1.1
Severity: serious
Tags: ipv6
Justification: fails release goal
I’m currently in the FOSDEM WLAN (IPv6-only, not FOSDEM-legacy),
and I can neither connect to the Jabber server with SRV RRs nor
when hardcoding commu.teckids.org in mcabberrc.
A netcat on
Package: amarok
Version: 2.9.0-1+b1
Severity: normal
Tags: a11y
Dear Maintainer,
libmariadbd18 does not exist any longer, but Amarok still depends on it. This
would make Amarok uninstallable unless
one has installed it from other sources or has kept it from when it was
available in the repos.
Package: libmkl-rt
Version: 2019.1.144-4
Severity: important
Dear Maintainer,
After installing intel-mkl and setting MKL as default BLAS/LAPACK
implementation, wrong results are obtained when large arrays are
multiplied in octave. Here is the output of a MWE:
octave:1>
Package: libmojo-sqlite-perl
Version: 3.001-1
Severity: serious
Package: libmojo-sqlite-perl
Architecture: all
Depends: libdbd-sqlite3-perl:amd64 (>= 1.54),
libdbi-perl:amd64 (>= 1.627),
...
This does not make sense - either it works without
the :amd64, or it should become
Package: wnpp
Severity: wishlist
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
* Package name: edit-indirect
Version : 0.1.5
Upstream Author : Fanael Linithien
* URL : https://github.com/Fanael/edit-indirect.git
* License : BSD
Programming Lang:
Marc Haber wrote:
On Thu, Jan 10, 2019 at 03:47:24PM +0100, Christoph Anton Mitterer wrote:
...
Plus it automatically imports the shipped public key into the keyring
of the executing user… which is IMO also unacceptable.
Agreed, the script should use its own keyring.
The script creates a
Package: clamav
Version: 0.100.2+dfsg-0+deb9u1
Since Feb 1, freshclam will log:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.100.2 Recommended version: 0.101.1
Is it possible to back port 0.101.1+dfsg-1? into stable?
Thanks,
--
Frans van Berckel
Media Engineer /
Source: postsrsd
Version: 1.5-1
Severity: serious
Tags: ftbfs
https://buildd.debian.org/status/package.php?p=postsrsd
...
dh_auto_test -a -O--buildsystem=cmake
cd obj-s390x-linux-gnu && make -j2 test ARGS\+=-j2
make[1]: Entering directory '/<>/obj-s390x-linux-gnu'
Running tests...
Control: -1 tags +wontfix
Hello Josip,
On 6/4/18 2:16 PM, Josip Rodin wrote:
> For some reason there exists an expect script in
> /usr/lib/courier/courier-authlib/authsystem.passwd
> which seems to be calling passwd(1),
> which causes courier-authlib to depend on expect(1),
> which in turn has a
Package: src:xen
Version: 4.11.1-1
Currently, these are rdepends:
-$ apt-cache rdepends libxenmisc4.11
libxenmisc4.11
Reverse Depends:
libxen-dev
xen-utils-4.11
collectd
qemu-system-x86
libvirt-daemon
collectd-core
It's on the wishlist to start doing buster-backports for Xen.
If
Package: libbpfcc-dev
Version: 0.8.0-1
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hey!
Could you please include the .pc file which is provided upstream? It
would help to build projects depending on libbcc (like bpftrace).
Also, the -dev is missing the .so which is shipped
Hi,
> Only remove that patch? Or add some other code?
Yes, only remove it. My tests showed that it's enough to fix the menu (as I
wrote
in the upstream report).
Oh, I see it's already fixed by now, thanks :)
Control: tag -1 + patch pending
X-Debbugs-CC: kapo...@melix.org
Dear libev maintainer,
I've prepared an NMU for libev (versioned as 1:4.22-1.1) and
uploaded it to DELAYED/5. Please feel free to tell me if I
should delay it longer.
Regards.
diff -Nru libev-4.22/debian/changelog
Hello,
On February 01 2019, Robbie Harwood wrote
> Package: elpa-git-commit
> Version: 2.90.1-1
> Severity: important
>
> Dear Maintainer,
>
> elpa-git-commit and magit's interactive rebase mode don't seem to be
> able to handle the - character in pathnames/branches.
I did some test, and found
Package: picard-tools
Version: 2.18.25+dfsg-1
Severity: serious
The dependency libgkl-java is amd64-only, and the easiest
way to fix testing migration as well as being generally
correct (what's the point of binary-all when it is only
installable on 1 architecture?) is
Architecture: all -> amd64
Package: ftp.debian.org
Severity: normal
Hi! With my team-maintainer hat on: this package currently has no active
maintainers, is
dead upstream and it's popcon is low.
Moreover the functionality can be found in other packages in the archive.
So please remove this package.
Thanks, Lisandro.
Package: python3-surfer
Version: 0.9.0-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package fails to upgrade from
'testing'.
It installed fine in 'testing', then the upgrade to 'sid' fails
because it tries to overwrite
Package: wnpp
Severity: wishlist
Owner: Steffen Moeller
* Package name: braker
Version : 2.1.2
Upstream Author : K.J. Hoff
* URL : https://github.com/Gaius-Augustus/BRAKER
* License : Artistic
Programming Lang: Perl
Description : guides from NGS to
Hi Benjamin,
Can you tell me what info you need? Anything I should check?
Salt-master and systemd package info:
$ apt policy systemd
systemd:
Installed: 240-4
Candidate: 240-4
Version table:
240-5 50
50 http://cdn-fastly.deb.debian.org/debian sid/main amd64 Packages
*** 240-4
Package: pescetti
Version: 0.5-3
Hi,
pescetti recommends dds which isn't available anymore, at least in
buster and sid.
Regards,
Gabriele Stilli
On Mon, Jan 28, 2019 at 07:01:52PM -0800, Felix Lechner wrote:
> Maybe the pending Perl commit 672eb451 will help? Details in #916313.
FYI I've just uploaded perl/5.28.1-4 which fixes #916313.
Hope that helps.
--
Niko Tyni nt...@debian.org
Hi Dmitry,
> +Tag: script-uses-unversioned-python-in-shebang
> +Severity: normal
^^
Hmm, I thought we were just going to use this to see the numbers
rather than ask maintainers to "fix" this?
> +# Check for unversioned python shebang (#909510).
> +for my $file
Control: forcemerge 914915 -1
Hi Patrick,
Quoting Patrick Schleizer (2019-02-02 15:05:00)
> # How to reproduce:
>
> sudo mmdebstrap --mode=root
> --aptopt=/home/user/whonix_binary/aptgetopt.conf stretch
> /var/cache/pbuilder/base.cow
>
I've tested light-locker a bit more but still am not able to reproduce
the bug reliable. Sometimes it happens direct and sometimes not even
after having the system locked for hours. Is there anything I can do to
debug this?
Axel
Package: xscreensaver
Version: 5.42+dfsg1-1
Followup-For: Bug #782644
Dear Maintainer,
I have the same bug but it’s worse: I did not launch xscreensaver by myself.
I suspend the computer with the Moon key and when I wake it back, xscreensaver
is launched and refuses my password.
I can’t even
Sorry if I created a burden. I didn't wanted to achieve anything
particular except to find the good location where to report the bug. In
fact I am not really sure which package is 'responsible' of this bug: At
first glance, this is a driver issue because the bug is not reproducible
with GPUs
Package: ftp.debian.org
Severity: normal
We are requesting the removal of libswagger2-perl:
* Upstream deprecated the module in 2017 [1]
* Upstream website/repository is no longer available [2]
* No reverse dependencies
[1]
Hello tobi,
thanks for your bug report!
Could you provide two file sets (for two directories) which trigger the bug
when kdiff3 is called upon them?
Ciao,
Eike
signature.asc
Description: This is a digitally signed message part.
On 2019-02-01 18:35:11, Nicholas D Steeves wrote:
> Hi Antoine!
>
> On Wed, Oct 31, 2018 at 11:46:20AM -0400, Antoine Beaupre wrote:
>> On Fri, Jul 29, 2016 at 07:42:00AM +0200, Ola Lundqvist wrote:
>> > Hi
>> >
>> > Sorry for the delayed answer. I tried to reproduce your problem myself but
>> >
On Sat, 2019-02-02 at 13:23 +0100, at46 wrote:
> Hi Jean-Dominique,
>
> are you mixing stable and testing? As far as I can see
> Firmware-nonfree/20190114-1 isn't available for stable/stretch. Maybe
> you also need to use a newer kernel. The Debian changelog
>
On 2019-02-02 17:52:50, Pierre-Elliott Bécue wrote:
> Le vendredi 01 février 2019 à 20:26:07-0500, Antoine Beaupre a écrit :
>> Package: mailman3
>> Version: 3.2.0-4~bpo9+1
>> Severity: grave
>>
>> I'm finding it difficult to use the "domain" feature of Mailman 3. From
>> what I understand, it
Oh, and I forgot to mention I document the steps I took to configure
mailman here:
https://anarc.at/services/mail/
There are other configurations there, naturally, in particular spamd
integration, dkim and other stuff, which might create problems...
a.
--
Advertisers, not governments, are the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
I sorted out the remainder of the packaging issues with debalance and he
sponsored the package.
It is now in the NEW queue:
https://ftp-master.debian.org/new/evdi_1.5.1+dfsg-1.html
-BEGIN PGP SIGNATURE-
Le vendredi 01 février 2019 à 20:26:07-0500, Antoine Beaupre a écrit :
> Package: mailman3
> Version: 3.2.0-4~bpo9+1
> Severity: grave
>
> I'm finding it difficult to use the "domain" feature of Mailman 3. From
> what I understand, it allows you to have two distinct mailing lists
> named "test"
Source: coquelicot
Version: 0.9.6-1.1
Severity: serious
Tags: ftbfs
Justification: fails to build from source
coquelicot currently fails to build in both unstable and buster, with
several test failures. Log attached.
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
tags 921176 + moreinfo
thanks
Hi Pirate,
> journalctl -xe shows this error. This used to work before. It is clean
> lxc install on a sid host.
I just tried to quickly reproduce this but my lxc-foo is lacking… :(
However, I suspect that we are using too aggressive a set of
security hardening
Package: libreoffice
Version: 1:6.1.5~rc1-2
Severity: important
Crashes in the splash binary:
$ libreoffice
Fatal exception: Signal 11
Stack:
/usr/lib/libreoffice/program/libuno_sal.so.3(+0x3d593)[0x7f284572f593]
/usr/lib/libreoffice/program/libuno_sal.so.3(+0x3d7a3)[0x7f284572f7a3]
Package: wpasupplicant
Version: 2:2.7-3
Severity: normal
wpasupplicant does not promptly restart dhclient after suspending and
resuming my laptop.
Expected behaviour: if I suspend my laptop, move to a different
location, and resume my laptop, wpasupplicant should associate to the
new network and
Hello Jean-Dominique Frattini,
I am not involved in packaging any of these packages,
but I noted that you opened the last three days nearly
the same issue against three different packages?
What are you trying to achive that way?
And you noted versions contained in current Buster,
but you claim it
Thanks.
I wrote autotools scripts a while ago, need to dust them off and get
them working...
user devscri...@packages.debian.org
usertag 841270 new
retitle 841270 new script: debrequest -- tool to generate RFS and ITP requests
mails
thanks
[ Thanks to Bart for reassigning the bug ]
On Wed, Jan 30, 2019 at 08:48:57PM +, Dmitry Bogatov wrote:
> [2016-10-21 08:09] Gianfranco
On Sat, Feb 02, 2019 at 04:40:17PM +0300, Rince wrote:
> Package: popularity-contest
> Version: 1.64
> Severity: minor
>
> Dear Maintainer,
>
> We noticed a misprint in the Russian translation of the package
> configuration dialogue and corrected the mistake
Dear Rince,
Your report seems a
Hello Tobias,
On 02/02/2019 19:28, Tobias Hansen wrote:
> I can also add it to sagemath, I have to do another upload anyway.
I have just added to python-sagetex wrt Alexis hints.
Cheers,
Jerome
>
> Best,
> Tobias
>
> On 2/2/19 7:06 AM, Jerome BENOIT wrote:
>> tags 921120 ftbfs
>> thanks
>>
package: redis-server
version: 5:5.0.3-4
severity: grave
justification: unstable to start the service
journalctl -xe shows this error. This used to work before. It is clean
lxc install on a sid host.
sudo lxc-create -n buster -t debian -- -r buster
I was trying to install gitlab, but that
https://ftp-master.debian.org/new/web-mode_16.0.21-1.html
Package: fwupd
Version: 1.1.4-1
Severity: important
Dear Maintainer,
after doing "fwupdmgr refresh", "fwupdmgr update" downloads the latest
firmware update for my Thinkpad X280 and, as always, asks for a reboot
to install it.
With the former updates, after reboot, it installed the firmware
On 2019-02-01 18:49:53, Nicholas D Steeves wrote:
> Hi Antoine and Emacsen team,
>
> On Tue, Aug 04, 2015 at 09:43:38PM -0700, Francois Marier wrote:
>> Package: wnpp
>> Severity: wishlist
>>
>> * Package name: web-mode
>> Version : 12
>> Upstream Author : François-Xavier Bois
>>
Ok, thanks. Also has the advantage that we can avoid a sagemath upload now,
which would delay testing migration of all these packages another two days.
Best,
Tobias
On 2/2/19 4:42 PM, Jerome BENOIT wrote:
> Hello Tobias,
>
> On 02/02/2019 19:28, Tobias Hansen wrote:
>> I can also add it to
On 2/2/19 6:26 AM, Dmitry Bogatov wrote:
> I believe we already discussed this issue and came to conclusion, that
> the right thing to do would be to generate .depends files in
> /var/lib/insserv and adjust `startpar' accordingly.
Someone suggested doing this, it was an option on the table. But
Dear Alexis, thanks for your analysis.
I am on my way to repack sagetex
Cheers,
Jerome
On 02/02/2019 18:36, Alexis Murzeau wrote:
> On Fri, 1 Feb 2019 20:45:08 +0100 Paul Gevers wrote:
>> reassign 921120 src:sagetex 3.2+ds-1
>> retitle 921120 sagetex (autopkgtest) depends misses python-tk
>>
Le 02/02/2019 à 16:23, Jerome BENOIT a écrit :
> Dear Alexis, thanks for your analysis.
> I am on my way to repack sagetex
> Cheers,
> Jerome
>
Hi,
Ok nice, thanks :)
--
Alexis Murzeau
PGP: B7E6 0EBB 9293 7B06 BDBC 2787 E7BD 1904 F480 937F
signature.asc
Description: OpenPGP digital
Control: tag -1 + pending
On Wed, Jan 30, 2019 at 09:42:32PM +0100, Uwe Kleine-König wrote:
> Maybe adding spi-orion to
> debian/installer/modules/armel-marvell/mtd-modules is the right fix
> here, but I don't understand enough about the generation of udebs to
> judge if this is right.
After
I can also add it to sagemath, I have to do another upload anyway.
Best,
Tobias
On 2/2/19 7:06 AM, Jerome BENOIT wrote:
> tags 921120 ftbfs
> thanks
>
> On 01/02/2019 20:45, Tobias Hansen wrote:
>> Hi all,
>>
>> in the last update of sagemath I removed the dependency on python-tk. Now
>> the
Package: ftp.debian.org
X-Debbugs-Cc: ws...@packages.debian.org
Control: block 920171 by -1
wsjtx is now linux-any since, so these old binaries are now cruft.
--
regards,
Mattia Rizzolo
GPG Key: 66AE 2B4A FCCF 3F52 DA18 4D18 4B04 3FCD B944 4540 .''`.
more about
Package: ftp.debian.org
Control: block 920171 by -1
X-Debbugs-Cc: s...@packages.debian.org
sdpa build-depends on openblas, but openblas is not built on those
architectures anymore, therefore sdpa can't be built there anymore.
--
regards,
Mattia Rizzolo
GPG Key: 66AE
Source: qmath3d
Version: 0~1.0-1
Severity: serious
Control: block 920171 by -1
X-Debbugs-Cc: Wookey
Dear maintainer,
your new package qmath3d has
Build-Depends: debhelper (>= 10), qbs, qtbase5-dev, dh-exec, libstdc++-6-dev
We are going to remove gcc-6 soon, so please stop build-depending
Package: wnpp
Severity: wishlist
Owner: Steffen Moeller
* Package name: liblogger-simple-perl
Version : 2.0
Upstream Author : Thomas Stanley
* URL :
https://metacpan.org/pod/distribution/Logger-Simple/Simple.pm
* License : GPL or Artistic
Programming Lang:
Package: src:soupsieve
Version: 1.7.3+dfsg-1
Severity: serious
Tags: ftbfs
Dear maintainer:
I tried to build this package in sid but it failed:
[...]
debian/rules binary-indep
dh binary-indep --with
1 - 100 of 182 matches
Mail list logo
