On Fri, Jan 17, 2020 at 2:25 PM Arturo Borrero Gonzalez
wrote:
>
> Control: fixed -1 1.8.3-2
>
> On 1/16/20 11:10 PM, Alexander E. Patrakov wrote:
> > Package: iptables
> > Version: 1.8.2-4
>
> Thanks for the bug report!
>
> I couldn't reproduce
Package: iptables
Version: 1.8.2-4
Severity: normal
Dear maintainer,
This is a reproducible way to segfault iptables-restore (the nftables variant):
0. Start with a blank state.
1. Load the initial rules:
iptables-restore < original_rules.iptables
2. Attempt to test new rules, to be appli
This is now fixed upstream:
https://github.com/MariaDB/server/pull/1417
Package: opensmtpd
Version: 6.6.1p1-1
Severity: important
Dear Maintainer,
I was surprised that OpenSMTPD lost a cron mail that cron managed to submit
while smtpd was not running (stopped temporarily for maintenance). I
expected smtpd to send it later, when I start it, but the message just kept
s
xy changed [not included]
-- no debconf information
--
Alexander E. Patrakov
Control: reassign -1 mariadb-server-10.3 1:10.3.18-0+deb10u1
Control: forwarded -1 https://jira.mariadb.org/browse/MDEV-21140
Also created a pull request upstream:
https://github.com/MariaDB/server/pull/1417
Yes, I will do so later today or tomorrow.
/fstransform/commit/1a935732abdd2ef998b8a3f172dc6d9548b49fab
Thanks!
--
Alexander E. Patrakov
Package: fstransform
Version: 0.9.3-2
Severity: critical
Tags: upstream
Justification: causes serious data loss
Dear Maintainer,
approximately 1.5 years ago I have discovered a reproducible case
of filesystem corruption by fstransform, and reported it upstream:
https://github.com/cosmos72/fstran
ption.
--
Alexander E. Patrakov
smime.p7s
Description: S/MIME Cryptographic Signature
ace and log the result, you'll see numerous calls
to getrandom().
This might need a release-note if no other solution appears (like e.g.
[imagine a strawman here, I am not serious] making haveged essential
and copying it into the initramfs).
--
Alexander E. Patrakov
Stefan Fritsch :
> The rng should be initialized after the seed is loaded from disk.
This is false according to systemd developers. Its state is changed,
but it is still not initialized, because they think that the seed
might come from a gold master image.
--
Alexander E. Patrakov
y
upgrading an old system, or running debootstrap directly, or running old
debootstrap, or using major hacks during the install procedure.
--
Alexander E. Patrakov
installed during that five-month
period.
In other words, it's already too late to "minimize" the damage by
undoing the change, and there is no point in acting quickly. At least in
my opinion.
--
Alexander E. Patrakov
forwarded 837597 https://github.com/systemd/systemd/issues/4271
thanks
Of course the above forwarding is insufficient, because of
non-systemd-based systems.
entropy pool.
--
Alexander E. Patrakov
rting
NetworkManager. It helps shorten the wait :)
Also I tried installing haveged, it didn't help.
--
Alexander E. Patrakov
11.01.2016 04:03, Tormod Volden пишет:
On Thu, Jan 7, 2016 at 3:03 PM, Alexander E. Patrakov wrote:
I have tried to install the prism2-usb-firmware-installer package.
It tried to download a firmware file from this location:
http://git.shaftnet.org/git/gitweb.cgi?p=linux-wlan-ng.git;a
Source: linux-wlan-ng
Version: 0.2.9+dfsg-5
Severity: important
Dear Maintainer,
I have tried to install the prism2-usb-firmware-installer package.
It tried to download a firmware file from this location:
http://git.shaftnet.org/git/gitweb.cgi?p=linux-wlan-ng.git;a=blob_plain;f=src/prism2/ru01
Are there any plans to produce a stable update containing this fix?
Package: src:linux
Version: 3.16.7-ckt11-1+deb8u5
Followup-For: Bug #771224
Dear Maintainer,
this bug still exists in Jessie. Here is a "me too" report. The server is in
Hetzner.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version
4
05.07.2015 21:43, Alexander E. Patrakov wrote:
I have hit this bug in a Jessie-based virtual machine that I created in
order to teach myself how to deal with MD RAID1.
In order to work around it, I have replaced initramfs-tools with dracut
(040+1-1). Result: the bug is still reproducible. The
some timeout, we cannot find all RAID
components, is missing.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
that wraps a
program that provides one readiness protocol and thus makes it
compatible with the init system that expects another protocol.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
prepended to the original sessionclean invocation)
to avoid that issue. As a bonus, this will generate a cron mail
(without raising LA) if the script does run over its own tail.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
/bin/dash
Versions of packages php5 depends on:
ii libapache2-mod-php5 5.4.4-14
ii php5-common 5.4.4-14
php5 recommends no packages.
php5 suggests no packages.
-- no debconf information
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.
commend it.
Package name: blinker
Version: 1.2
Upstream Author: Jason Kirtland
URL: http://discorporate.us/projects/Blinker/
License: MIT
Programming Lang: Python
Description: Fast, simple object-to-object and broadcast signaling
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs
ian22 1.2.12-2
ii zlib1g1:1.2.7.dfsg-13
Versions of packages aptitude recommends:
pn apt-xapian-index
pn aptitude-doc-en | aptitude-doc
ii libparse-debianchangelog-perl 1.2.0-1
ii sensible-utils 0.0.7
Versions of packages
l changes in /etc between the
upgrade and the reboot).
Also, for anyone reading this bug, I would like to stress that I
consider it an issue only for systems running the testing
distribution, because big dist-upgrades are not frequent in stable.
--
Alexander E. Patrakov
--
To UN
reboot, too. If the kernel is upgraded, then you'll have
to reboot by whatever method that works for you, anyway.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
t] does this state information
really belong to /var? It is written to only when /usr is written to,
by the same package manager that modifies the root fs and /usr. Maybe
it's time to move it to /usr so that it is not intermixed with really
variable user data.
--
Alexander E. Patrakov
-
ease: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
Alexander E. Patrakov
--
To UNS
Package: python2.7
Version: 2.7.2-8
Severity: normal
Dear Maintainer,
I was trying to package a custom daemon written in Python for my
company. I used the following debian/rules:
#!/usr/bin/make -f
override_dh_installinit:
dh_installinit --name=customdaemon -R
%:
dh --with pyth
--- src/mp-trigonometric.c 2010-04-26 07:14:22.0 +0600
+++ src/mp-trigonometric.c 2010-11-19 22:49:06.0 +0500
@@ -524,6 +524,7 @@
} else {
mp_epowy(&t, &t);
mp_add_integer(&t, 1, z);
+mp_add_integer(&t, -1, &t);
mp_divide(&t, z, z);
Package: dbconfig-common
Version: 1.8.46
Severity: wishlist
I made a custom proprietary "company-website" deb package for internal
use in my company. This package uses dbconfig-common for prompting
database connection details and installing/upgrading MySQL tables. It
ships the following files rela
Olaf van der Spek wrote:
> On Sun, Sep 19, 2010 at 5:18 PM, Alexander E. Patrakov
> wrote:
> > Yes, saving the config as 14-trac.conf helps. But the number space
> > between 10-fastcgi.conf and 15-fastcgi-php.conf is so narrow...
>
> How much numbers do you need?
1, b
ebservers
ii openssl 0.9.8o-2 Secure Socket Layer (SSL)
binary a
pn rrdtool (no description available)
-- Configuration Files:
/etc/lighttpd/conf-available/15-fastcgi-php.conf: [changed only
PHP_FCGI_CHILDREN]
/etc/lighttpd/lighttpd.conf changed [not included]
-
system
ii libc6 2.11.2-2 Embedded GNU C Library:
Shared lib
dash recommends no packages.
dash suggests no packages.
-- debconf information:
* dash/sh: true
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
ical uptime more than 12 hours other than this Xen
guest.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
[resending - forgot to CC: the bug]
Craig Small wrote:
> On Mon, Jul 12, 2010 at 10:48:14AM +0600, Alexander E. Patrakov wrote:
> > For some processes on my Linode VPS (in other words, a Xen guest), top
> > displays nonsense runtimes such as 5124095 hours. Attached is a gzipped
&g
Package: procps
Version: 1:3.2.8-9
Severity: normal
For some processes on my Linode VPS (in other words, a Xen guest), top
displays nonsense runtimes such as 5124095 hours. Attached is a gzipped
file produced by this command:
strace -e read,write -s 4096 top 2>top.strace
>From that file, you are
Package: hadoop-bin
Version: 0.20.2+dfsg1-2
Severity: normal
The hadoop-defaults.sh script (included from /usr/bin/hadoop) contains:
CLASSPATH="${HADOOP_CONF_DIR}":
$JAVA_HOME/lib/tools.jar:/usr/share/hadoop:${HADOOP_CLASSPATH}:
${CLASSPATH}
if [ -f "${HADOOP_CONF_DIR}/hadoop-env.sh" ]; then
.
Package: hbase-bin
Version: 0.20.4+dfsg1-1
Severity: important
In the help of hbase, I see:
hbase(main):002:0> help
HBASE SHELL COMMANDS:
Examples:
hbase> create 't1', {NAME => 'f1', VERSIONS => 5}
hbase> create 't1', {NAME => 'f1'}, {NAME => 'f2'}, {NAME => 'f3'}
hbase> # The above
which version)?
I don't use Debian or Arora anymore. If you want me to test Arora on
Gentoo today or on Ubuntu on Monday - say so. Or, since the testcase is
simple enough, test it yourself.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debia
This bug also applies to
linux-image-2.6.30-rc4-amd64_2.6.30~rc4-1~experimental.1~snapshot.13587_i386.deb
However, on my Gentoo system, I can run tcpdump just fine even with a
self-compiled 64-bit kernel and 32-bit userspace
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs
mod-error-initrd-2.6.29-2-amd64: false
linux-image-2.6.29-2-amd64/postinst/bootloader-error-2.6.29-2-amd64:
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
maximilian attems wrote:
> can you reproduce with a newer linux image aka 2.6.29 ?
I have not tried 2.6.29 yet, but in my self-compiled 2.6.27.6 (built
after seeing patches that match my problem on LKML) the problem no
longer exists.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email
ine word1(x) ((U*)&x)->L[0]", and clone this bug
accordingly.
System information: irrelevant.
Diego Elio Pettenò: you received this mail because I want you to do the
same thing for Gentoo.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.or
notfound 489948 0.6.6-1
thanks
The version in experimental sets the WEP key immediately. In fact,
this has been fixed in 0.6.5-something.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
ds no packages.
Versions of packages rrdtool suggests:
pn librrds-perl (no description available)
-- no debconf information
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Vedran Furač wrote:
> Could you post your xorg.conf?
It is almost the default (and relies on autodetection).
--
Alexander E. Patrakov
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from
Reinhard Tartler wrote:
> "Alexander E. Patrakov" <[EMAIL PROTECTED]> writes:
> > Try to ffplay or convert the attached crash.dts file (not a valid DTS
> > stream, produced by accident when I made a wrong change to my
> > not-yet-released DTS encoder) - ffmp
Package: ffmpeg
Version: 0.svn20080206-8
Severity: normal
Try to ffplay or convert the attached crash.dts file (not a valid DTS stream,
produced by accident when I made a wrong change to my not-yet-released DTS
encoder) - ffmpeg segfaults at least on amd64, which may have security
implications.
ueries the new window
>> size it still gets the old size from xterm. (race condition?)
>
> any other clues would be helpful. Usually I'm using fvwm and tcsh (and
> don't see any problems). Both the window manager and the shell have some
> influence.
Looks exactly like t
lose it too with your upload.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
mlibs/ptp2/library.c:{"Panasonic:DMC-LZ2",
0x04da, 0x2372, 0},
libgphoto2-2.4.1/camlibs/ptp2/library.c:{"Panasonic:DMC-LC1",
0x04da, 0x2372, 0},
libgphoto2-2.4.1/camlibs/ptp2/library.c:{"Panasonic:Lumix FZ5",
is misaligned because bytes,
characters and cells are completely different things) in multibyte locales.
IMHO it is a good idea to educate such ignorant upstreams with a new warning
about printf format strings that specify %s and the field width (and possibly
precision).
--
Alexander E. Patrakov
I have reported this bug (in different terms) upstream. See
http://sourceforge.net/tracker/index.php?func=detail&aid=2034873&group_id=12272&atid=112272
This is not a translation bug, but a bug in exif that still uses format
strings to align the output.
--
Alexander E. Patrak
g (and a related issue - no output in the ru_RU.KOI8-R
locale) for me. Please update the package.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
0x0040 1x 64 bytes
bInterval 0
Device Status: 0x
(Bus Powered)
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
This doesn't apply to newly-received messages, only to the ones received with
a buggy version of kmail. Sorry for the panic. To recover from the breakage,
I moved all affected messages to a temporary folder and then back.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL
reopen 490058
thanks
In kmail 3.5.9-5, the bug and its duplicates are fixed only partially. Before
I click on the message to mark it as read, the incorrect characters exist.
After I click, the sender name becomes correct until I close and restart
kmail.
--
Alexander E. Patrakov
--
To
Julien Cristau wrote:
> On Mon, Jul 14, 2008 at 18:45:47 +0600, Alexander E. Patrakov wrote:
> > The original patch attached to http://bugs.debian.org/484225 contains
> > bashisms of the form "export VARIABLE=VALUE". Please fix them instead
> > of applying the
The original patch attached to http://bugs.debian.org/484225 contains bashisms
of the form "export VARIABLE=VALUE". Please fix them instead of applying the
patch blindly.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubs
rs
may want to run "compiz --replace gconf &" instead.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
out without reading the script.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
?
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: arora
Version: 0.2~gitcee18fe6ce55bf-1
Severity: normal
Enter this URL into the address bar:
http://liquidat.files.wordpress.com/2008/05/richtexteditor.png
The image will appear scaled down by default (even though the unscaled
version fits), and clicking on it doesn't make the imag
Package: arora
Version: 0.2~gitcee18fe6ce55bf-1
Severity: normal
Go to http://demos.anyterm.org/anyterm_nano/anyterm.html and try typing
a slash into their nano editor. You can't do this, because arora
intercepts the keystroke. Note that Iceweasel handles this situation
better (and allows t
ke
spell-checking words containing them a must-have feature.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: dosbox
Version: 0.72-1.1
Severity: normal
$ strace -e open dosbox
open("/dev/snd/seq", O_WRONLY) = 8
ALSA:Can't subscribe to MIDI port (65:0) nor (17:0)
open("/dev/sequencer", O_WRONLY)= 8
MIDI:Opened device:oss
open("/etc/localtime", O_RDONLY)= 9
open("timidity.
the huge list of reverse dependencies.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
4.6.21-8 Berkeley v4.6 Database Libraries
Versions of packages iproute recommends:
pn libatm1(no description available)
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
chitecture: amd64 (x86_64)
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: findutils
Version: 4.4.0-2
Severity: minor
To reproduce, run this (stupid) command (the contents of the current directory
don't matter):
find . -name phc/\*.tex
The output is:
find: warning: Unix filenames usually don't contain slashes (though
pathnames do). That means that '-name `
latest version and retest?
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
, in particular, Settings -> Keyboard? (or,
better, attach $HOME/.kde/share/config/konsolerc)
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
check the translation
of the normal desktop file (the normal program launcher) in the menu?
Easytag is not in testing, so the following applies to
http://ftp.de.debian.org/debian/pool/main/e/easytag/easytag_2.1.4-1_amd64.deb:
/usr/share/applications/easytag.desktop is correct
--
Alexander E
Package: gnome-system-monitor
Version: 2.22.1-1
Severity: normal
The "network" tab, for PPPoE users, shows the network load incorrectly.
On such systems, there are two interfaces: ppp0 and eth0. The pppoe
kernel module encapsulates PPP traffic over Ethernet (needed for
authenticating to the ISP)
4) Some presented options to switch layouts actually don't work (e.g., if I
configure LShift+RShift, this combination has simply no effect).
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: debian-installer
Severity: normal
Tags: l10n
To reproduce: download mini.iso (either text-mode or graphical). Start
installation, select Russian as the language. At some point, you will be asked
(by console-setup) which key combination to use for switching between layouts.
Then you'l
Package: gnome-app-install
Version: 0.5.2.7-1
Severity: normal
Tags: l10n
To reproduce: start gnome-app-install in the ru_RU.UTF-8 locale, then go
to Audio & Video, and navigate to EasyTAG. In the upper panel, the
display looks like this:
DJPlay
[ ] (DJplay icon)
smbios-bin (no description available)
-- no debconf information
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Otavio Salvador wrote:
Does it also break Calc as datasource too?
Yes, that's why the comment.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
field and as attribution on paper sheets to be put inside these
envelopes). Is this OK?
If MS Office also requires installation of MS Access for mail merge, please note
this in this bug report and forget my comment.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
al reference implementation of the FAT file system).
--
Alexander E. Patrakov
by default.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ical ALSA setup, either. So,
please find another player. For myself, I have installed VLC.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
equest (warning, copyrighted material--please delete the iso and erase the
CD-RW after reproducing the bug).
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Yves-Alexis Perez wrote:
On Tue, Mar 11, 2008 at 03:10:26PM +, Alexander E. Patrakov wrote:
* when inserting CDs that contain DivX AVI files with the .vob extension
in the VIDEO_TS folder (as commonly sold in Russia), the volume manager
apparently misrecognizes them as DVDs and starts
Yves-Alexis Perez wrote:
On Tue, Mar 11, 2008 at 02:38:17PM +, Alexander E. Patrakov wrote:
How can policykit, which is, according to the description on its web page, just
a parser for configuration similar to that one in /etc/sudoers, help here?
Well, upstream said that. I didn&#
Yves-Alexis Perez wrote:
apt-get remove hal
HAL is used by other packages for good and wanted functionality.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ly
misrecognizes them as DVDs and starts (per my configuration) VLC, which
mistreats them for audio CDs and plays loud noise that is theoretically able to
damage speakers. Not reported upstream yet.
So, it may be a good idea to disable HAL support in the future Xfce packages.
--
Alexa
overing hfs and ncphs filesystems.
Even after fixing the kernel WRT codepage and iocharset, a problem about setting
defaults for other mount options (such as "usefree" and "showexec") remains, but
I don't see any architecturally clean solution (i.e., without code duplica
to improve this patch, by
addressing the objection about not covering hfs and ncphs filesystems.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
indeed a successful installation, please say so to
[EMAIL PROTECTED] If something is wrong, please describe (by
human-readable words) what exactly failed and send this description to
[EMAIL PROTECTED]
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Luk Claes wrote:
Alexander E. Patrakov wrote:
you have blocked debmirror out of testing due to bug #449350. However,
with a fully up-to-date Lenny install, I can't reproduce the bug (even
the original testcase), and therefore it definitely doesn't make the
package unusable f
2.5.9-4Apply a diff file to an
original
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
.e., the output contains three characters. So my best guesses, so far, are:
1) Faulty memory. Please run memtest86 for at least 2 hours.
2) An issue with your shell prompt. Please add "; echo" to your test command to
add a trailing newline.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE,
-constant) function over the area covered by this destination pixel.
--
Alexander E. Patrakov
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 154 matches
Mail list logo
