too many start processes
run in parallel which better should run sequentially.
If somebody can explain me how to change this behavior (beware: all steps
must be done from the emergence environment!) I will give a try for it.
Andreas
--
Andreas Meile
Hauptstrasse 63
CH-8242 Hofen SH
Tel. +41 5
In the meantime, I also made some additional tests about this issue.
Jessie with default partitioning: I completely wiped out the MBR with zeros
and allowed the installer to use a default partition layout. Result is
exactly the same, i.e. the "A start job is running for
dev-mapper-isw_djiacbdb
Package: dmraid (or other?)
Version: (current in Debian 8 Jessie/amd64/dpkg -l not possible in emergency
shell)
Severity: important
Full details see
http://beilagen.dreael.ch/Diverses/Details_Debian_8_Jessie_20151130/
First problem is the "module dm-raid45 not found in modules.dep"
(P1330002
Package: samba
Version: 2:4.1.13+dfsg-2
Severity: important
Dear Maintainer,
I set up a Samba 4 DC using "apt-get install samba" and then "samba-tool
domain provision" using SAMBA_INTERNAL - this worked fine. To enable
reverse DNS I use a
samba-tool dns zonecreate localhost 0.1.10.in-addr.arpa -
Hello Ben
You're using an old netboot image and this failure is expected.
Thanks for your reply. I exactly supposed the same issue (obsoleted
mini.iso).
The actual problem is not a developement issue, it's an issue that some
folders on the official FTP sources are not updated. For example
Package: Installer (mini.iso)
Version: 02-Oct-2014 09:01 (Jessie)
Severity: important
When I try to install a Debian testing version using
http://ftp.ch.debian.org/debian/dists/testing/main/installer-amd64/current/images/netboot/mini.iso
I always get an error message about missing kernel module
Package: pure-ftpd
Version: 1.0.36-1.1
Severity: normal
Dear Maintainer,
During a security incident with a compromised FTP account I needed to lookup
the IP address inside the /var/log/messages log file.
Issue: When the foreign host has set bad DNS entries, for example
$ORIGIN 2.0.192.in-addr.a
Hello Quentin
Thanks for your hints. Because there is a new "mini.iso" online in the meantime, I
repeated a basic "out of the box" setup on my hardware (IBM NetVista A40 model 6840-QDG,
Promise Fastrak TX2300, two Western Digital Caviar Red 2 TB NAS disks).
All partitions are deleted, MBR is z
Package: apcupsd
Version: 3.14.8-2
Severity: normal
After apcupsd installation and configuration I get the following messages
in /var/log/kern.log (daemon/kernel crash):
**
May 10 11:31:36 deb6test kernel: [ 37.132161] usb 1-2: New USB device found,
idVendor=051d, idProduct
Severity: grave
Package: initrd(?)
In the meantime, I tested the first stable Wheezy release on the hardware as
described in the previous messages of this bug, i.e. IBM NetVista A40 (model
6840-QDG), Promise Fastrak TX2300 PCI and two Western Digital Caviar Red 2
TB SATA drives configured as R
After fixing bug #704635 I tested a new Debian Wheezy setup today. To
exclude any partition layout specific issues, I allowed Debian to use the
whole disk with the automatic partitioning layout including ext4.
Result: Setup (using mini.iso, FTP source=mirror.switch.ch) completely runs
fine but
Hello Didier
- Original Message -
From: "Didier 'OdyX' Raboud"
To: "Andreas Meile" ; <704...@bugs.debian.org>
Sent: Thursday, April 04, 2013 10:22 AM
Subject: Re: Bug#704635: [Wheezy] Package authentication issue during base
installation: BusyBox
Package: base-installer
Version: 1.130
During the setup of a Debian Box (hardware: IBM NetVista A40 model 6840-QDG,
512 MB RAM, Promise Fastrak TX2300 SATA RAID and two Western Digital Caviar
Red NAS 2 TB SATA hard drives configured as RAID-1 on it => dmraid=yes
option at CD boot. Installation
Today, I tested a similar installation with a Promise Fastrak TX2300
controller and two SATA hard drives as RAID-1. Result is exactly the same:
Installation fully suceeds including GRUB but the system randomly produces
the same
mount: mounting /dev/disk/by-uuid/x on /root failed: Device or
Package: dmraid / OS setup general
Version: 1.0.0.rc16-4.2
root@smbserv:~# dpkg -l|grep dmraid
ii dmraid 1.0.0.rc16-4.2 i386
Device-Mapper Software RAID support tool
ii libdmraid1.0.0.rc16 1.0.0.rc16-4.2 i386
Device-Mapp
Package: installation-reports
Boot method: Used mini-iso burnt on CD-RW
Image version:
http://mirror.switch.ch/ftp/mirror/debian/dists/squeeze/main/installer-i386/current/images/netboot/mini.iso
Date: 2010-11-19T16:20
Machine: HP Pavillion m9060.ch
Partitions: see debug logs
Base System Insta
16 matches
Mail list logo