Package: installation-reports
Debian-installer-version: October 12 2005 -
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso
uname -a: <The result of running uname -a on a shell prompt>
Date: <Date and time of the install>
Method: <How did you install? What did you boot off? If network
install, from where? Proxied?>
Machine: Intel 945GI chipset, Intel 10/100 82562ET, Intel GMA950
Processor: Celeron D 345J
Memory: 2x512 MB PC3400 DDR2
Root Device: 250GB 7200 16mb SATA300 WDC WD2500KS-00M (2 identical drives in
system on SATA ports 0 and 1)
Root Size/partition table:
Disk 1 sda
Partition 1 primary: 100M mountpoint /boot formatted ReiserFS bootable
Partition 2 primary: 10G mountpoint / formatted ReiserFS
Partition 3 primary: 768M swap area
Partition 4 primary: 239.2G LVM volume
Desk 2 sdb
Partition 1 primary: 250.1 GB LVM volume
LVM:
VG1 (sda):
VG1, LV Home 107.4 GB mountpoint /home formatted ReiserFS
VG1, LV Usr 16.1 GB mountpoint /usr formatted ReiserFS
VG1, LV Var 42.9 GB mountpoint /var formatted ReiserFS
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp: Unknown device 2770 (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2772 (rev
02)
0000:00:1b.0 0403: Intel Corp.: Unknown device 27d8 (rev 01)
0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 27d0 (rev 01)
0000:00:1c.2 PCI bridge: Intel Corp.: Unknown device 27d4 (rev 01)
0000:00:1c.3 PCI bridge: Intel Corp.: Unknown device 27d6 (rev 01)
0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 27c8 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 27c9 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 27ca (rev 01)
0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 27cb (rev 01)
0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 27cc (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp.: 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 27b8 (rev 01)
0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 27df (rev 01)
0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 27c0 (rev 01)
0000:00:1f.3 SMBus: Intel Corp.: Unknown device 27da (rev 01)
0000:04:05.0 Firewire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
Controller (PHY/Link)
0000:04:08.0 Ethernet controller: Intel Corp.: Unknown device 27dc (rev 01)
lspci -n:
0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:02.0 0300: 8086:2772 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1c.2 0604: 8086:27d4 (rev 01)
0000:00:1c.3 0604: 8086:27d6 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:04:05.0 0c00: 104c:8024
0000:04:08.0 0200: 8086:27dc (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ O ]
Configure network HW: [ E ]
Config network: [ O ]
Detect CD: [ O ]
Load installer modules: [ O ]
Detect hard drives: [ O ]
Partition hard drives: [ O ]
Create file systems: [ O ]
Mount partitions: [ O ]
Install base system: [ O ]
Install boot loader: [ O ]
Reboot: [ O ]
Comments/Problems:
Network hardware not detected. Manually selected Intel Pro 100 - network
responded properly.
Had to try this multiple times before final stage succeeded - had forgotten to
set bootable flag on /boot partition.
begin:vcard
fn:Bryan Orthner
n:Orthner;Bryan
org:Keewatin Career Development Corporation
adr;dom:135 Finlayson St.;;Box 489;Air Ronge;SK;S0J 3G0
email;internet:[EMAIL PROTECTED]
title:Director of Research and Development
tel;work:1-306-425-4778
tel;fax:1-306-425-4780
tel;cell:1-306-425-7944
x-mozilla-html:TRUE
url:http://www.kcdc.ca
version:2.1
end:vcard
