Package: typo3-dummy
Version: 4.3.0-4.1
Severity: normal
Tags: squeeze
Since the last upgrade in January(?) /etc/cron.d/typo3-dummy throws the
following error messages:
The supplied 'cliKey' was not valid. Please use one of the available from this
list:
Array
(
[0] => lowlevel_refindex
Package: gthumb
Version: 3:2.10.8-1
Severity: important
--- Please enter the report below this line. ---
Saving a cropped image does not ask for a filename, rather overwrites
the original without notice!
IMHO, this is a serious bug. It should never overwrite the original, and
if, only after user
Hello Julien
Ok, now I've got a Xorg log with an error which hopefully helps.
David
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-3)
Current Operating System: Linux apollo 2.6.26-1-686 #1 SMP Wed Jul 30
Package: gnash
Version: 0.8.2-2
Severity: important
--- Please enter the report below this line. ---
After playing Flash animations in Iceweasel mostly 2 or more processes
keep running even after Iceweasel has been closed and eat up almost 100%
CPU cycles.
I have to kill them manually.
--- Syste
Package: libpgsql-ruby
Version: 0.7.9.2008.03.18-1
--- Please enter the report below this line. ---
I should have read /usr/share/doc/libpgsql-ruby/NEWS.Debian.gz first...
[EMAIL PROTECTED]:~$ irb
irb(main):001:0> require 'pg'
=> true
irb(main):002:0> exit
Works fine. My fault.
--- System info
Package: libpgsql-ruby
Version: 0.7.9.2008.03.18-1
Severity: important
--- Please enter the report below this line. ---
After installation of all the Debian packages for Ruby on Rails as
described in http://www.debian-administration.org/articles/329 I see the
following error:
[EMAIL PROTECTED]:~
Riccardo Stagni wrote:
>
> Have you tried to start X from a getty console with startx and then change
> console?
Yes, the same error occurs. So could you please reassign this bug to
xorg then (perhaps xserver-xorg-core)?
Thank you.
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Hi Marc
Marc Haber wrote:
>
> Please re-try with lsb-base 3.2-8, this might be a corollary bug
> caused by #475258.
Yes, with lsb-base 3.2-8 I could remove exim4-daemon-light and install
postfix.
Thank you.
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
Andreas Metzler wrote:
What version of lsb-base have you got installed?
I've got version 3.2-7
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: exim4-daemon-light
Version: 4.69-2
--- Please enter the report below this line. ---
I can confirm this bug. I see the exact same behavior on my system. I
also want to install postfix instead of exim4 but dpkg doesn't let me.
Isn't there a workaround until the bug will be resolved?
-
Riccardo Stagni wrote:
What do you mean with "last upgrade"? Last qingy upload is dated back to
december 2007, four months ago.
Well, it happens since a few days. I am upgrading every day.
X started/was launched from the first virtual console (tty1)?
X was started by qingy or by some other l
Package: qingy
Version: 0.9.6-2
Severity: grave
--- Please enter the report below this line. ---
Since the last upgrade changing to a virtual console kills the running
X-session. Moreover, it changes everytime to the first virtual console,
no matter which one was chosen (like e.g. Ctrl-Alt-F6)
Package: eclipse-platform-gcj
Version: 3.2.2-4
Severity: normal
--- Please enter the report below this line. ---
Several eclipse packages fail to install:
Preparing to replace eclipse-platform-gcj 3.2.2-4 (using
.../eclipse-platform-gcj_3.2.2-5_i386.deb) ...
Unpacking replacement eclipse-plat
Package: xboard
Version: 4.2.7-7
Severity: wishlist
--- Please enter the report below this line. ---
For better assessing the strength of chess engines it would be helpful
to be able to use the -depth option twice, for both engines separately.
This seems not to be the case.
--- System informa
retitle 388362 ITA: uligo -- tsumego (go problems) practice tool
owner 388362 !
thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: wnpp
--- Please enter the report below this line. ---
Pablo Torralba expressed his wish to adopt this package in March 2007
but it still lacks a maintainer: http://packages.qa.debian.org/u/uligo.html
Even though I am not a DD yet, I am planning of becoming one since a
long time. Thi
Package: qgo
Version: 1.5.4-r2-1
Severity: normal
--- Please enter the report below this line. ---
When sorting the players list from IGS according the numbers of won or
lost games the numbers are treated as strings. Therefore the sorting
does not make sense.
--- System information. ---
Arch
Guillem Jover wrote:
Could you send your '/var/lib/dpkg/alternatives/x-terminal-emulator'
to this bug report?
It is empty.
apollo:~# ls -l /var/lib/dpkg/alternatives/x-terminal-emulator
-rw-r--r-- 1 root root 0 2007-12-14 19:10
/var/lib/dpkg/alternatives/x-terminal-emulator
apollo:~# updat
Package: uligo
Version: 0.3-5
Severity: normal
--- Please enter the report below this line. ---
/usr/lib/python2.4/whrandom.py:38: DeprecationWarning: the whrandom
module is deprecated; please use the random module
DeprecationWarning)
--- System information. ---
Architecture: i386
Kernel:
Package: aterm
Version: 1.0.1-3
Severity: important
--- Please enter the report below this line. ---
Setting up aterm (1.0.1-3) ...
Use of uninitialized value in length at /usr/sbin/update-alternatives
line 735.
update-alternatives: error or eof reading
/var/lib/dpkg/alternatives/x-terminal-em
Package: xserver-xorg
Version: 1:7.3+8
Severity: serious
--- Please enter the report below this line. ---
Enabling loading the wacom core event devices in xorg.conf (by
uncommenting the commented lines below) breaks loading of the X-server
completely. With them commented out it works flawlessl
Hi Ian
Sorry for not having sent you the strace.
Anyway, version 1.14.12 installed seamlessly, so you can close the bug I
guess.
David
Ian Jackson wrote:
David Andel writes ("Bug#452799: does not install"):
Preparing to replace dselect 1.14.5 (using .../dselect_1.14.1
Package: qgo
Version: 1.5.4-r2-1
Severity: normal
--- Please enter the report below this line. ---
When playing computer versus computer it doesn't start playing in
handicap games. Rather, one has to do the first white move manually.
After that, it plays. But it should do the first move as wel
Package: dselect
Version: 1.14.5
Severity: important
--- Please enter the report below this line. ---
I see this error since a long time, seems though that I am the only one?
Preparing to replace dselect 1.14.5 (using .../dselect_1.14.11_i386.deb) ...
Unpacking replacement dselect ...
dpkg: err
ncurses5 (>= 5.6+20071006-3) | 5.6+20071013-1
--
David Andel, MD-PhD Candidate, Artificial Intelligence Laboratory
Institute of Information Technology, University of Zurich
Andreasstrasse 15, 8050 Zurich, Switzerland
Phone: +41-1-635 45 75, Fax: +41-1-635 68 09, e-mail: [EMAIL PROTECTED
Hi Dirk
Thanks for your quick answer.
/usr/lib/R/site-library/Rcmdr/Meta/ contains the same files as in your
case and they are the same size as well.
Unfortunately, purging and reinstalling didn't change anything.
I could install it directly from CRAN, and it seems to load then, but
doesn't wo
Package: r-cran-rcmdr
Version: 1.3-5-1
Severity: grave
--- Please enter the report below this line. ---
Even though library() finds the Rcmdr library, it cannot be loaded:
> library(Rcmdr)
Error in library(Rcmdr) :
'Rcmdr' is not a valid package -- installed < 2.0.0?
--- System information.
Package: icedove
Version: 2.0.0.4.dfsg1-2
Severity: normal
I have got the same error in Icedove as is described in the bug
https://bugs.launchpad.net/firefox/+bug/65609 except that the line of
the error now is 3940.
I did not try applying the patch reported there yet but I think it
should work
Version 1.1.1-2 works fine.
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Version 1.5.0.10.dfsg1-3 works fine.
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Frank Küster wrote:
>
> What are the arguments to these etex or pdfetex instances? Does
> "xmltex" show up in each of them? If yes, this is a duplicate of
> #419987.
>
> In order to be able to install texlive, please remove xmltex.
I didn't check the arguments, but after removing xmltex it in
Package: texlive-base-bin
Version: 2007-5
Severity: grave
Justification: renders package unusable
The installation procedure starts mktexfmt which in turn starts etex and
pdfetex instances. They are being started until memory is full and the
system freezes. I have had over 800 instaces of etex.
Package: tclex
Version: 1.2a1-10
Severity: normal
--- Please enter the report below this line. ---
On my system tclex is the only package still depending on the old
tcl/tk8.3 packages. It would be nice if you could update that.
--- System information. ---
Architecture: i386
Kernel: Linu
Package: wmnetselect
Version: 0.85-5.6
Severity: normal
--- Please enter the report below this line. ---
mozilla and firefox have been renamed, therefore iceape and iceweasel
should be suggested. And it should work with them, which does not seem
to be the case now.
--- System information. --
Package: wmspaceweather
Version: 1.04-18
Severity: normal
--- Please enter the report below this line. ---
I think it should open the sensible browser instead of netscape which is
not in Debian anyway.
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.18-4-686
Debian Rel
Package: wmtemp
Version: 0.0.5-4
Severity: normal
--- Please enter the report below this line. ---
Please show the temps at the correct position. Now they are interchanged.
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.18-4-686
Debian Release: lenny/sid
990 unstable
Alexander Sack wrote:
BTW, Compact folder should be run regularly, to not slow things down
... but it is usually run automatically (unless you have really old
profile or changed that preference).
Since the last email I have started and stopped icedove several times
without a problem. But then
Alexander Sack - Debian Bugmail wrote:
Can you try to use compact folder on that folder once (e.g. right
mouse button on folder, then "Compact ..."?
Ok, after doing this on the first folder which is being opened after
startup, icedove crashed. But then I could start it for the first time
wit
On Tue, 2007-03-27 at 14:52 +0200, Alexander Sack - Debian Bugmail
wrote:
> Didn't you get that error with iceape as well?
yes
> So, please let us know what is special about your setup, anything
> right off your head?
Nothing particular. I am using kernel 2.6.18-4-686, Gnome 2.14.3.6 and
nothing
[EMAIL PROTECTED]:~$ icedove -g
/usr/lib/icedove/run-mozilla.sh -g /usr/lib/icedove/icedove-bin
MOZILLA_FIVE_HOME=/usr/lib/icedove
LD_LIBRARY_PATH=/usr/lib/icedove:/usr/lib/icedove/plugins:/usr/lib/mre/mre
DISPLAY=:0.0
DYLD_LIBRARY_PATH=/usr/lib/icedove:/usr/lib/mre/mre
LIBRARY_PATH=/usr/lib/iced
On Sun, 2007-03-25 at 22:44 +0200, Mike Hommey wrote:
> What are the accessibility features you have enabled on your
> desktop ? I'd really like to be able to reproduce this...
None that I know of. Maybe it helps to tell that iceape (and icedove for
that matter) starts just fine if I move my man
On Sun, 2007-03-25 at 20:07 +0200, Mike Hommey wrote:
> Could you send a backtrace ?
[EMAIL PROTECTED]:~$ iceape -g
GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcome to change it and/or distr
Package: iceape-mailnews
Versions:
1.0.8-3(/var/lib/apt/lists/debian.ethz.ch_debian_dists_testing_main_binary-i386_Packages)(/var/lib/dpkg/status)
Reverse Depends:
mozilla-mailnews,iceape-mailnews
mozilla-imagezoom,iceape-mailnews
iceape-dbg,iceape-mailnews 1.0.8-3
iceape-dbg,iceape-mailne
Package: gtkgrepmail
Version: 1.0-1
Severity: grave
Justification: renders package unusable
Search renders some errors, but then sais that search is complete.
View renders an "xterm: Can't execvp /usr/bin/elm: No such file or
directory". I didn't find that file in any debian package...
-- System
On Sat, 2007-01-27 at 10:40 +0100, Mike Hommey wrote:
> Thanks for the backtrace. Could you try the same after installing
> libatk1.0-dbg, please ?
[EMAIL PROTECTED]:~$ iceape -g
GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU Genera
On Sun, 2007-01-14 at 19:03 +0100, Mike Hommey wrote:
> Yes, please. Also try to get a backtrace with gdb (don't forget to
> install iceape-dbg first for it to be useful)
[EMAIL PROTECTED]:~$ iceape -g
GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, c
On Thu, 2007-01-18 at 09:06 +0100, Martin Wuertele wrote:
> Does ~andel/var/backups/apollo on 130.60.xx.xx exist? If not try
> duplicity /root scp://[EMAIL PROTECTED]//var/backups/apollo
That was the problem, the directory did not exist on 130.60.xx.xx. Now
it works fine. Unfortunately I did not f
Package: duplicity
Version: 0.4.2-10.1
Severity: grave
Justification: renders package unusable
Whatever I enter, if I use it through backupninja or directly on the
commandline, it always returns the same error:
apollo:~# duplicity /root scp://[EMAIL PROTECTED]/var/backups/apollo
Couldn't canonica
Package: icedove
Version: 1.5.0.9.dfsg1-1
Severity: grave
Justification: renders package unusable
After first startup, the import of mail folders seemed to work fine, then the
main window showing the mail lists appeared and then it crashed. Since then,
it always crashes immediately after opening t
Package: iceape-mailnews
Version: 1.0.7-2
Severity: grave
Justification: renders package unusable
After startup, it opens the window, mail lists are visible for a short time,
then crashes.
Please ask me for the complete strace output...
[EMAIL PROTECTED]:~$ tail strace.iceape
brk(0x9a06000)
Package: imms
Version: 3.0.1-1
Followup-For: Bug #329565
immsd seems to work fine now.
Thanks!
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Loca
Package: jpilot-plugins
Version: 0.99.8-0.99.9-pre-20060214-1
Severity: important
The two files Keys-Gtkr.pc3 and Keys-Gtkr.pdb should have permissions 600, not
644 as is now by default.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
A
Package: xrestop
Version: 0.3-2
Severity: wishlist
Seems that one has to kill xrestop by Ctrl-c.
It would be nice if one could quit using 'q' as usual.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386
Package: jpilot
Version: 0.99.7-0.99.8-pre10-2
Severity: wishlist
It just happened to me the second time to miss an appointment just because
jpilot starts the week with Sunday and so I was sure my app was on Tuesday!
Damn!
Could you include an option to start the week with Monday PLEASE!
-- Syste
Package: imgseek
Version: 0.8.5-1
Severity: normal
After defining a new volume in the browse window, the new volume is available
in the add window as expected. It can be selected normally, but when starting
adding images by clicking the 'Add !' button the selection jumps back to the
first volume i
Package: imms
Version: 2.0.3-2
Severity: normal
immsd is running many times, e.g. in my case now it's running 151 instances!
some of these processes regularly block alsa from playing, especially when
xmms changes from one track to the next.
-- System Information:
Debian Release: testing/unstable
Package: electricsheep
Version: 2.6.3-1
Severity: normal
I am running electricsheep in xscreensaver. It keeps opening new X clients
without closing the old ones. After one night xrestop shows 224 open
clients, the ones opened by electricsheep having PID '?' and Identifier
''. Eventually they reach
Package: taglog
Version: 0.1.52-1
Severity: minor
The newest version on sourceforge is 0.1.57. Please update the debian package.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh
58 matches
Mail list logo
