in the last message I should have wrote that /etc/profile is never read by
the root user and thus the paths ending in sbin are not in the PATH
variable. /etc/profile might be read by the ordinary (non-root) user but I
don't know how it would happen when one logs into the GUI with no shell
I installed Debian 10 from a usb drive, had this problem, and solved it..
The PATH environment variable is set in /etc/profile but since /etc/profile
is only run by a login shell and there is no login shell, /etc/profile
never runs and it never has a chance to set PATH. I use the lxde GUI.
Package: aptitude
Version: 0.8.11-3
Severity: normal
Dear Maintainer,
I have a free dial-up connection to the inernet and do long (like
overnight) unattended downloads. When the connection is lost my wvdial
program redials and a few minutes later reestablises a connection of my
computer with the
Package: console-setup
Version: 1.185
Severity: important
Dear Maintainer,
I copied linux from a 20-yr old disk to a brand new one 100 times as large
in GB. But what I copied is only 2-3 years old so I updated it using
aptitude and have several problems, one of which I'll describe here. The
Package: lprng
Version: 3.8.B-2.1
Severity: important
Dear Maintainer,
I used aptitude to upgrade packages and it somehow converted sysv init to
systemd init. Most updated packages installed OK except lprng failed to
configure. I tried installing it on another drive (that has some unknown
enet (I think it's the last FreeNet left in the USA). Slow
but I'm willing to wait days for upgrading.
>
> Cheers
> Stuart
>
> --
> Stuart Prescotthttp://www.nanonanonano.net/ stu...@nanonanonano.net
> Debian Developer http://www.debian.org/ stu...@debian.org
> GPG fingerprint90E2 D2C1 AD14 6A1B 7EBB 891D BBC1 7EBB 1396 F2F7
David Lawyer
)
I: Retrieving Packages
E: Couldn't download
http://debian.usu.edu/debian/dists/stretch/main/binary-i386/Packages
debootstrap needs to find one of the compressed files. download it, and
unconpress it. But it doesn't.
David Lawyer
Package:systemd
Version:237-4
My ISP blocks ntp and the ntp package isn't installed. When I type:
timedatectl I see "Failed to determine whether NTP is enabled:" and don't
see the info nomally displayed.
David Lawyer
Package: mutt
Version: 1.7.1-5
Here's the /etc/rc.local script I use to set colors.
Note that I send ESC[8] to set as default. Other programs such as vim
restore the default colors after exiting but mutt doesn't nor does it use
these colors.
# rc.local
#
# This script is executed at the end of
The problem is fixed. I found some very old .x.. configuration files in my
home directory and root directory. They said to use icewm which is in
conflict with the lxde/lightdm setup I'm now using. I removed them and
the problem is gone.
David Lawyer
the display is
fixed-space (mono-spaced) but the font is variable-width (non-mono
spaced).
One fix is just to not provide variable-width fonts for lxterminal..
David Lawyer
Package: lxde_9_all
Version: no versioning
I don't know what part of lxde (or other program) is causing this problem.
lxde_commom is v. .99.2-3.
When I make a mistake loging into lxde, it asks me to try again but will
not log me in.
David Lawyer
On Tue, Jul 11, 2017 at 12:10:49PM -0400, Felipe Sateler wrote:
> (Please always keep the bug in CC).
>
> On Sun, Jul 9, 2017 at 1:11 AM, David Lawyer <davylawy...@gmail.com> wrote:
>
> > On Thu, Jul 06, 2017 at 04:15:34PM -0400, Felipe Sateler wrote:
> &g
30-2 (2017-06-12) i686 GNU/Linux.
Process root (#1) is init and not systemd. pulse starts up at boottime
since "pulseaudio.desktop" is found in /etc/xdg/autostart/ and X starts at
boottime which apparently executes the files in the above autostart
directory..
David Lawyer
Package: mutt
Version:1.8.3+neomutt20170609-2
When I type c to change mailboxes , I see the message ('?' for list). Yet
if I type ? I don't see the long list of my mailboxes but instead see my
incoming mailbox dave (path: /var/spool/mail/dave). I want to see the
mailboxes in ~/Mail.
I had to
meone else. The pid always maps
to lxpolkit. You have to click "OK" on this error message to get rid of
it.
David Lawyer
I use 16x32 font which is large.
Should xterm give the option of using the same fonts as for the console?
This would be of value if one has already set up the fonts for the
console, (as I have) since the default console fonts seem to also be way
too small.
David Lawyer
ps it just shouldn't be displayed at all or
possibly only if over 50% of free memory is allocated, etc.
David Lawyer
On Tue, May 09, 2017 at 07:48:53PM -0400, Thomas Dickey wrote:
> On Mon, May 08, 2017 at 09:17:22PM -0700, David Lawyer wrote:
> > Package: lynx
> > Varsion: 2.8.9dev13-l
> >
> > When I type in a search string (in English) to Google or Bing and the
> > length
,noexec, 0
1
David Lawyer
to the screen). This problem was not present in
dev11-1. I suspect that this bug is due to the fix for another bug
involving the echoing of multi-byte characters #841155 which dev13-1
fixed. But it seems that this fix has resulted in a new bug.
David Lawyer
to the screen). This problem was not present in
dev11-1. I suspect that this bug is due to the fix for another bug
involving the echoing of multi-byte characters #841155 which dev13-1
fixed. But it seems that this fix has resulted in a new bug.
David Lawyer
t if I type "setterm -foreground blue
I get a a significantly deeper blue.
David Lawyer
the PC
with it perhaps 60 times with no delay like this. However, I upgraded the
kernel to -pae perhaps a couple of weeks ago. There are now 2 HD's on my
PC, one SATA (ata30) and the other a slower PATA with a ribbon cable.
David Lawyer
ore but
uses lba addressing. So either have -P ignore by default in lilo or
change fdisk so that it creates the obsolete CHS format on the disk.
David Lawyer
t a switch_latch is like a toggle).
For example the rus variant of the us layout includes both a latin and
Cyrillic (Russian) character set with level 3 being the latin characters.
This is tantamount to a variant within a variants.
David Lawyer
.
David Lawyer
sites that I can use, Today
I tried again I it did find one HTTP site out of 10 tested.
David Lawyer
;
CODESET="Uni3"
FONTFACE="Terminus"
FONTSIZE="16x32"
David Lawyer
nning for
awhile (a minute or two).
So why isn't it working? I'm running Debian 4.2.3 on an old Pentium I PC.
And I updated using aptitude in Nov. 2015 which might be about when
problems with chrony started (but I failed to investigate them then).
David Lawyer
on blue,
there's no need for a moving overall progress bar which is much less
accurate to read than the numerical value in %.
David Lawyer
On 2014-03-28 David Lawyer d...@lafn.org wrote:
Package: exim4_4.82-5_all
Version: 4.82-5
I have 4 exim4 packages installed for each version. When I updated
exim4 from 4.80-4 to 4.82-5, exim broke since it would not output
email to my smart-host. The logs said that the smart-host
authentation required. It's obvious
this is happening because of the failure of 4.82 to send any authentication to
the server.
David Lawyer
Diff results (wdiff) for debugging exim4 4.80 (blue) and 4.82 (red). Use cat
eximdiff | colordiff | most to view in color
flash by so fast I can't read them well.
The server is i586 and the client is i686 both running the same OS which
should work on both.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Package:fetchmail
Version: 6.3.21-4
In the FAQ you could up should be replaced with you could end up or
you could wind up
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Package: xserver-xorg-core
Version: 1.12.4-5_i386
When I type startx, the xserver crashes. I found on the internet that
others report a crash due to the vgahw module (actually libvgahw.so). Note
that this module is part of the core package. Heres the log:
[ 13059.599]
X.Org X Server 1.12.4
On Sat, Aug 25, 2012 at 12:37:26PM -0400, Thomas Dickey wrote:
On Thu, Aug 23, 2012 at 11:16:55AM -0700, David Lawyer wrote:
Package: lynx-cur
Version: 2.88dev.12-2
When I go to the website yandex.ru (Russian search engine) and type in
2-byte Cyrillic characters (as a search word
chars.
apart, etc.).
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
) but not To's (T flag) which I need so I had to
add this.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
is not acceptable (not long enough).
Here's how I fixed it based on what someone else did per the Internet:
Create file /etc/exim4/exim4.conf.localmacros and add the line:
TLS_DH_MIN_BITS = 512
David Lawyer
--
To UNSUBSCRIBE, email to debian
Package: extundelete
Version: 0.2.0-2
When I update the testing package list for i-386 (done today) and then
use aptitude to try to install extundelete I get the following
message:
David Lawyer
Reading package lists...
Building dependency tree...
Reading state information
.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: lynx-cur
Version: 2.8.8dev.8-1
Severity: normal
Using unicode utf-8 is broken. Looking a a Russian site which is
utf-8 results in about half of the Russian characters missing (and
replaced by escaped codes like ~B, ~D, etc. I use a utf-8
terminal (using the Putty program on a laptop)
don't understand why ncurses would cause
half of the alphabet to be eaten.
My $TERM variable is putty.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
it simple like it was before it was messed up with long UUIDs.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
in the software or documentation?
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
On Fri, Dec 26, 2008 at 11:31:50AM +0100, Moritz Muehlenhoff wrote:
On Fri, Apr 28, 2006 at 02:39:02PM -0700, David Lawyer wrote:
Package: linux-image-2.6.15-1-486
Version: 2.6.15-8_i386
While booting version 2.6.15 on a Pentium 1, there is a long pause
while the kernel probes ide0
module snd-sb16
To: David Lawyer [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
* Elimar Riesebieter [070916 22:30 +0200]
On Sat, 15 Sep 2007 the mental interface of
David Lawyer told:
On Fri, Sep 14, 2007 at 08:04:13PM +0200, Elimar Riesebieter wrote:
[...]
Sorry
think something is wrong when it probably isn't.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
this issue with the kernel from the upcoming release
of Debian (lenny, version 5.0), then please me know and I'll be happy
to reopen this bug report.
Thanks.
--
Martin Michlmayr
http://www.cyrius.com/
Date: Wed, 23 Feb 2005 16:54:21 -0800
From: David Lawyer [EMAIL PROTECTED]
Subject
by the terminfo (type infocmp on
the command line to see it: LINES#25 in my previous case) be used when
one starts most.
David Lawyer
Regards,
Mako
--
Benjamin Mako Hill
[EMAIL PROTECTED]
http://mako.cc/
Creativity can be a social contribution, but only in so far
is somewhat degraded in some way. Also, I've noticed a
long pause of a few seconds after this initramfs... message and think
that something wrong is going on at this point.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
the
original settings and then restores them). The fix is to just not
to change the parity setting of the interface. It could be some program
that apt-get calls that is the culprit.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
or enter to send a character to the program).
There could be other changes too, I didn't check.
I tried strace but since strace controls the terminal interface,
parity doesn't get disabled.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
,
including searching the Internet. It was also annoying when I needed
to use locate but couldn't since it was missing.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
it again and got the same results with coreutils
5.97.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
).
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Since I wanted to finish installing my iceape-browser, I patched the
code myself and it seems to work OK. I just edited
/usr/sbin/update-iceape-chrome and replaced the two lss with
command ls.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
--
This also happens for some other https connections, but not on all
https connections. Other browsers will connect to these sites.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
On Fri, Sep 14, 2007 at 08:04:13PM +0200, Elimar Riesebieter wrote:
On Fri, 14 Sep 2007 the mental interface of
David Lawyer told:
On Tue, Sep 11, 2007 at 06:18:21PM +0200, Elimar Riesebieter wrote:
On Tue, 28 Aug 2007 the mental interface of
Elimar Riesebieter told:
On Mon, 27
On Tue, Sep 11, 2007 at 06:18:21PM +0200, Elimar Riesebieter wrote:
On Tue, 28 Aug 2007 the mental interface of
Elimar Riesebieter told:
On Mon, 27 Aug 2007 the mental interface of
David Lawyer told:
Package:alsa-utils
Version: 1.0.14-1
When I type aplay ..., there is no sound
to start sound and don't
want to auto-load them at boot time. I've only got 32 MB of memory
and aplay is supposed to load the modules by loading snd-sb16 which
then loads a lot more sound moudules per the dependency tree.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL
On Sun, Aug 05, 2007 at 05:37:42PM +0200, Elimar Riesebieter wrote:
On Fri, 03 Aug 2007 the mental interface of
David Lawyer told:
On Mon, Jul 30, 2007 at 08:17:26PM +0200, Elimar Riesebieter wrote:
On Sun, 29 Jul 2007 the mental interface of
David Lawyer told:
On Sun, Jul 29
On Mon, Jul 30, 2007 at 08:17:26PM +0200, Elimar Riesebieter wrote:
On Sun, 29 Jul 2007 the mental interface of
David Lawyer told:
On Sun, Jul 29, 2007 at 05:00:53PM +0200, Elimar Riesebieter wrote:
Hi David,
On Tue, 24 Jul 2007 the mental interface of
David Lawyer told
, it will not find it
since it's really named snd-sb16. This type of situation is true for
all modules that have - in their names.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, overriding what may be set by jumpers.
If the driver has such limitations, they need to be either fixed or
documented.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
piix9476 0 [permanent]
generic 4868 0 [permanent]
ide_core 113316 3 ide_disk,piix,generic
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
files
(I've yet to get it to work with other formats and there are problems
with interrupt conflicts, etc. but that's another story for which I'll
file bug reports against the snd-sb16 module.)
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Regarding changing the current package description of the linuxdoc-tools
package (David Lawyer suggested a shorter description).
On Tue, May 29, 2007 at 06:18:31PM +0200, Agustin Martin wrote:
I have been looking at this, and since I agree that a shorter description is
preferrable, I have
noproc or have upgrades modify
/etc/fstab.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
behave
this way. I've installed the vim-runtime package so something in that
may be causing the problem.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
I had the same thought. I hope that the -bou covers all cases of
overstiking. I think it does but ...
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
explicitely desired. Thanks David Lawyer
for the hint (closes: #175575, #419324).
You mean that -c is passed to grotty by default by passing -P-c to
groff.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Tue, Apr 17, 2007 at 06:47:14PM +0200, Agustin Martin wrote:
Hi, David and Sano,
On Sat, Apr 14, 2007 at 02:07:45PM -0700, David Lawyer wrote:
Package: linuxdoc-tools
Version 0.9.21-0.5
Please merge bug 175575 into this bug report since it's a subset of
the bug (and proposed fix
to go
with option 1.
Since the overstrikes look nice in less and mc, I admit my personal
preference goes to (1), but I am not alone here. Sano?
Agustin
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
for how these 4 options (bcou) work together. To make this the
default, one could modify: /usr/share/linuxdoc-tools/dist/fmt_txt.pl
For example, this seems to work although I've never studied Perl:
create_temp($global-{tmpbase}.txt.1);
#next line added by DL (David Lawyer)
$global-{pass
).
There is a document, swsusp, in the power directory of the kernel
documentation and it says that it's not good to use suspend if the ide
driver is a module (as it is with this package). But is suspend being
used at all?
David Lawyer
long and should be
shortened. Let me know and I'll write you a shorter one. But the
most urgent task is to remove the errors I've pointed out.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
of the computer (actually of the Pentium CPU) is little endian (least
significant byte first). But od is supposed to report byte values,
not word values.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package:exim4-base
Version:4.60-3
My ISP started requiring TLS authentication so I checked the exim document
supplied by Debian: README.Debian.gz. It reads:
2.2. Using TLS
2.2.1. Exim 4 as TLS/SSL client
Both exim4-daemon-heavy and exim4-daemon-light support TLS/SSL using
the GnuTLS
On Tue, Jun 06, 2006 at 01:18:54PM -0700, Debian Bug Tracking System wrote:
The submitter address recorded for your Bug report
#370790: Debian README for exim4 misleading re TLS.
has been changed.
The old submitter address for this report was
David Lawyer [EMAIL PROTECTED].
The new
May 28 11:40:45 2006
Caught signal #15! Attempting to exit gracefully...
-
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
include dialup
software such as wvdial.
David Lawyer
PS: Below is a text copy of the netinst page:
http://www.us.debian.org/distrib/netinst
[1]Debian Project
Select
Package: linux-image-2.6.15-1-486
Version: 2.6.15-8_i386
While booting version 2.6.15 on a Pentium 1, there is a long pause
while the kernel probes ide0. There is no such pause in version
2.6.12. The kernel command line has: hda=none, hdb=none and ide0=none
so it should know there is no ide0
module-init-tools and it was rejected since it was claimed
that 2.2.20 is no longer supported. But lack of support shouldn't
mean introducing a bug into it, which has been done by the transition
from modutils 2.4.26 to 2.4.27.
David Lawyer
--
To UNSUBSCRIBE, email
2.2.20. I sometimes use kernel 2.2.20 since it loads about
3 times faster than 2.6.15 (but I hoping to improve 2.6.15 booting
speed by finding the causes of it's slowness on my PC).
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
a couple of other bug reports
related to this problem. I don't know why my inetd is missing since
it's in the runlevel.conf file. Could netkit-inetd have removed it?
Perhaps I could download a copy of the inetd script from the Internet.
David Lawyer
--
To UNSUBSCRIBE, email
On Tue, Feb 28, 2006 at 03:12:06AM +0100, Adeodato Sim?? wrote:
* David Lawyer [Mon, 20 Feb 2006 19:07:29 -0800]:
Hi,
I'm closing this bug, please write back if you need more information.
No. I went to the Debian website and couldn't get it from testing.
So it shows something
of functionality my system has
as a result. Perhaps the old configuration still works on the new
software versions ??
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
from what is claimed by the package
list.
David Lawyer
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
bottom bar). Dillo works OK for
about 95% of websites I go to.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
of the hw clock is automatically compensated for.
So there needs to be a documented option of using the adjust utility
and a variable in the script to set or comment out if one wants to use
it.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
-numberic) without any ` worked OK.
PS: I wrote the above years ago but don't think I submitted it.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
settings.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
terminals (which are now museum pieces)? So perhaps the fix
is for someone to patch groff instead of linuxdoc.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
95CB C76C E5AC 12CA DFA5
Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer
csmall at : enc.com.au ieee.org debian.org
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
DFA5
Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer
csmall at : enc.com.au ieee.org debian.org
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
1 - 100 of 108 matches
Mail list logo