Hello,
I had just found
https://unix.stackexchange.com/questions/303471/alsa-audio-device-reordering-cannot-find-the-slot-for-index-0-range-0-1-erro
And on my PC was a /etc/modprobe.d/sound.conf from 2020 (when the PC was
upgraded to Bullsye) with the content:
```
alias snd-card-0
Hello,
I have just booted with the old kernel from Bullseye (5.10.0-22-amd64)
and even with this kernel the problem occurs now (which was not the case
with Bullseye user land).
Also now the dmesg contains this lines:
[4.068265] usbcore: registered new interface driver uvcvideo
[
Package: src:linux
Version: 6.1.27-1
Followup-For: Bug #1022981
Dear Maintainer,
I have upgraded from Bullseye to Bookworm on 2023-07-09.
After the upgrade the sound card was not available.
lspci: 00:1f.3 Audio device: Intel Corporation 100 Series/C230
Series Chipset Family HD Audio Controller
Package: aptitude
Version: 0.8.7-1
Severity: important
Dear Maintainer,
aptitude crashes very shortly after start.
This is the gdb output:
Thread 1 "aptitude" received signal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 03.09.2016 um 23:23 schrieb Ola Lundqvist:
> Hi again
>
> I see that I have the answer in the report. Sorry.
>
> You should be able to change /etc/vnc.conf to make it start.
>
> If you do, please let me know what you changed it to, to
Package: vnc4server
Version: 4.1.1+X4.3.0-37.6
Followup-For: Bug #607775
Dear Maintainer,
the bug still exist in Debian Jessie:
LANG=C vnc4server
Found /usr/share/vnc-java for http connections.
New 'acer-ilzleite:1 (juergen)' desktop is acer-ilzleite:1
Starting applications specified in
Hello,
Am 11.11.2015 um 17:36 schrieb Markus Koschany:
> Hello,
>
> I have uploaded the final 0.4.5 release of Freeorion to
> jessie-backports. Please test this version again and report back
> if you can still reproduce the error.
the problem still occurs.
But now I have seen this problem also
Package: freeorion
Version: 0.4.4+git20150327-2
Followup-For: Bug #793415
Dear Maintainer,
after updating freeorion to the version from Debian-testing, the
problem still occurs:
Jul 29 20:36:35 acer-ilzleite kernel: [ 542.052371] nouveau E[
PGRAPH][:02:00.0] PGRAPH TLB flush idle timeout
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have just reconfigured freeorion, to clip the FPS to 20.
And now the syslog contains the attached lines.
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Icedove -
Package: freeorion
Version: 0.4.4-2+deb8u1
Severity: important
Dear Maintainer,
after playing freeorion for some minutes (usually less than an half
hour), the X11 display freezes, the sound stops to play and the
keyboard does not respond.
After some time X11 is switched off and it becomes
Package: hplip
Version: 3.14.6-1+b2
Followup-For: Bug #783296
Dear Maintainer,
the bug is not solved, as claimed in message #21:
After upgrading from Wheezy to Jessy hplip commands fail, e.g.:
hp-doctor
Traceback (most recent call last):
File /usr/bin/hp-doctor, line 37, in module
from
Package: src:linux
Version: 3.16.7-ckt9-3~deb8u1
Followup-For: Bug #775812
Dear Maintainer,
yesterday I have upgraded my desktop PC from Wheezy to Jessie.
I have recognized, that calling /sbin/halt or shutdown -P now
does not powerof the PC anymore.
By searching in the internet I have found this
Package: gogoc
Version: 1:1.2-5
Followup-For: Bug #731256
Dear Maintainer,
after upgrading my PC from Wheezy to Jessie, gogoc fails to start in
router mode. Because it uncorrectly configures radvd.
I have fixed it, with the following quick hack for my PC:
Package: swat
Version: 2:3.6.6-6+deb7u4
Severity: normal
Dear Maintainer,
since some time, swat has stoped to work on one of my machines.
Unfortunally I had not recognized when it happened, because I don't reconfigure
samba that often.
The problem is as follows: If I open swat as localhost:901
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sorry,
Am 02.09.2013 21:22, schrieb Ross Gammon:
tag 627833 +patch thanks
Hi,
As Version 3.4.6 of Gramps may not be packaged for Debian for some
time, I have created a patch for v3.4.0 from the latest upstream
that forces a UTF-8 locale to
Package: sweethome3d
Version: 3.5+dfsg-1
Followup-For: Bug #621464
Dear Maintainer,
sweethome3d worked some months ago (whenn Wheezy was testing). But
now it also crashes on my machine:
sweethome3d
[warning] /usr/bin/sweethome3d: Unable to locate
/usr/share/icedtea-web/netx.jar in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 22.08.2013 20:10, schrieb Gabriele Giacone:
See http://bugs.debian.org/683993 Install openjdk-7-jre
this does not help:
sudo aptitude install openjdk-7-jre
...
sweethome3d
[warning] /usr/bin/sweethome3d: Unable to locate
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 19.08.2013 19:11, schrieb Ross Gammon:
Juergen,
You did not tell us which version of Gramps you are running now.
Can you run gramps -v (without setting LANG to C) and reply to
the bug with that output attached? That should give the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Ross,
Am 18.08.2013 19:00, schrieb Ross Gammon:
Hi Juergen,
I was unable to reproduce this problem on my Squeeze machine
(Gramps 3.2.3-4).
Do you still have the problem? Or have you successfully upgraded
Gramps 3.4.0 which is in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I believe, that I had run into the same problem when I tried to
install Debian 7.1 on a PC which hosted SUSE Linux.
This PC had /home on /dev/sda3, which I had choosen to reuse as /home
without reformating.
In the next step the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 29.10.2012 20:01, schrieb manuk7:
Hi,
I think i got a similar bug (i'll open a new report if really
different) :
- When running 'gnuchess' from console, the 'gnuchess' process
takes 100% of the CPU. - When running 'xboard',
Package: evolution
Version: 3.4.3-1
Followup-For: Bug #582358
Dear Maintainer,
the installation of network-manager was enforced by dependencies to gnome
to my system and is also suggested by evolution.
But the connection to the internet/LAN is configured reliable by if-up.
So there is no need
Package: ipopd
Version: 8:2007e~dfsg-3.1
Followup-For: Bug #679708
Dear Maintainer,
since yesterday (2012-07-11) iceweasel fails to fetch the mails from localhost.
Syslog shows the following entry:
ipop3d: c-client library version skew, app=2007e library=2007f
Greetings
Juergen
--
Package: widelands
Version: 1:17-3
Severity: normal
Dear Maintainer,
I have a saved game. If I reload this saved game, widelands crashes with
segmentation fault after about 30 seconds (But not always).
See gdb output below:
Current directory is /usr/games/
GNU gdb (GDB) 7.4.1-debian
Copyright
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
the modifikation in libpam-mount breaks also gksu:
/usr/bin/x-terminal-emulator konnte nicht als Anwender root ausgeführt werden:
Failed to communicate with gksu-run-helper.
Received:
ehd_logctl: feature 1 is already zero
While
Package: solid-pop3d
Version: 0.15-24
Severity: important
Tags: upstream
Dear Maintainer,
during the last days I did the following package updates on my computer:
Aptitude 0.6.4: Protokoll
Mi, Jan 11 2012 17:48:39 +0100
WICHTIG: Dieses Protokoll zeigt nur geplante Aktionen an. Aktionen, die
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
the string, which is the symptom for the break of solid-pop3d is part of
libpam-mount:
strings /lib/libcryptmount.so.0 | grep feature
%s: feature %u is already zero
Therefore I reassigned the bug to libpam-mount.
Please see also the bugreport
Package: gnome-core
Version: 1:3.0+3
Severity: wishlist
Dear Maintainer,
each time when gnome is updated the old gnome session configurations
become unusable! So only the gnome failsafe session is usable.
But there is no way to replace the unusable old configuration settings
with the new
Package: update-manager
Severity: normal
Dear Maintainer,
I use on my system approx as repository proxy. This works fine with aptitutde
and apt-get. But update-manager produces the following error output:
Failed to fetch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
the problem description which I have recently sent, matches the
following bug entry (not Debian):
https://bugs.mageia.org/show_bug.cgi?id=726
But for me the problem is still reproducable.
Greetings
Juergen
-BEGIN PGP
Package: emacs23
Version: 23.3+1-1.1
Followup-For: Bug #604813
Dear Maintainer,
I have updated from squeeze to testing 3 days ago.
Since this update, the call of emacs causes a crash of the whole X11 session,
nearly independent of the kind of session (gnome, kde, xfce or sawfish).
An exception
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 05.08.2011 09:39, schrieb Christian Marillat:
Juergen Kosel juergen.ko...@gmx.de writes:
Package: gourmet
Version: 0.15.6-1
Severity: important
Hello,
Hi,
another user on my machine tried to use gourmet.
gourmet terminates
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 05.08.2011 19:36, schrieb Christian Marillat:
Juergen Kosel juergen.ko...@gmx.de writes:
[...]
ls -l ~caro/.gourmet/
insgesamt 96
-rw-r--r-- 1 caro caro 405 11. Sep 2009 guiprefs
drwxr-xr-x 2 caro caro 4096 11. Sep 2009
Package: software-center
Version: 2.0.7debian7
Severity: normal
Hello,
software-center crashes when choosing developmenttools (with German
environment).
Gnome collected the following information:
System: Linux 3.0.0+ #2 SMP Fri Jul 22 19:53:21 CEST 2011 x86_64
X Vendor: The X.Org Foundation
X
Hello,
after updating to gramps 3.2.6-1 and also
python 2.6.6-3+squeeze6 - 2.6.6-14
python-minimal 2.6.6-3+squeeze6 - 2.6.6-14
python-support 1.0.10 - 1.0.13
the gramps still crashes
Greetings
Juergen
System: Linux 2.6.38-2-amd64 #1 SMP Tue Mar 29 16:45:36 UTC 2011 x86_64
X Vendor: The
Package: gramps
Version: 3.2.3-4
Severity: important
Hello,
while trying to add the first person toa newly created database, gramps crashes:
System: Linux 2.6.38-2-amd64 #1 SMP Tue Mar 29 16:45:36 UTC 2011 x86_64
X Vendor: The X.Org Foundation
X Vendor Release: 10707000
Selinux: No
Package: gourmet
Version: 0.15.6-1
Severity: important
Hello,
another user on my machine tried to use gourmet.
gourmet terminates with the following output:
gourmet
Database older than 0.14.7 -- updating 0.14.5
Traceback (most recent call last):
File /usr/bin/gourmet, line 35, in module
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Am 01.05.2011 06:08, schrieb Jonathan Nieder:
tags 570638 + moreinfo
quit
Jonathan Nieder wrote:
Juergen Kosel wrote:
The SIGUSR1 was also reported in #549050, but interpreted as SIGHUP.
So the 2 bugs could be renamed and merged
Package: dpkg
Version: 1.15.8.5
Severity: minor
Hello,
yesterday I have upgraded an old computer from Lenny to Squeeze.
This machine has a long history. Debian Woody was installed on it 2005.
Now dpkg gives the following complaints on packages which were installed long
ago:
env LANG=C
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I believe 3 months ago tkmib was able to display the received values.
But after one update, it doesn't work anymore.
Now tkmib displays only the branches but not the leaves (with the
values) after snmpwalk, snmpgetnet or snmptable.
The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
please increase the severity of this bug. Because nautlius-clamscan is
unusable with the nautlius version which is part of current stable and
testing.
Greeting
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have now succeeded with the updated version 1.11 of live-magic to
build a live CD.
So either the bug is solved or not triggered any more due to different
contents of testing.
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hallo,
my cups server had an old print job, which should been printed on a old
printer, attached to an old computer running Lenny and also cupsd.
Both were switched off and therefore unreachable.
Now I have reenabled this two devices.
This stopped
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have just installed cups-dbg. Which add no debug information to cupsd.
Nevertheless I have started cupsd in gdb:
Current directory is /usr/sbin/
GNU gdb (GDB) 7.0.1-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+:
Package: cups
Version: 1.4.2-4
Severity: important
Hello,
I have just recognized that cups segfaults shortly after system start:
Feb 14 22:06:58 acer-ilzleite kernel: [ 370.622670] cupsd[3833]:
segfault at 0 ip 7fa817fa77c1 sp 7fff0c2d95b8 error 4 in
libc-2.10.2.so[7fa817f2e000+14a000]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
the dependency to emacs22 prevents also the upgrade to emacs23 without
keeping emacs22.
So I also want to ask, if this package is really depend to version 22 of
emacs?
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG
Package: gw6c
Version: 6.0.1dfsg.1-4
Severity: normal
Hello,
if gw6c connects to a new server, it asks the user to store the public
key of
the server. This okay, if gw6c is started from commandline by a (human)
user.
But if gw6c is started by /etc/init.d/gw6c script, the question to store
the
Package: dpkg
Version: 1.14.25
Severity: normal
Hello,
tspc doesn't work anymore. So when I tried to remove it, dpkg delivered
the following:
dpkg -r tspc
(Reading database ... 175350 files and directories currently installed.)
Removing tspc ...
Shutting down IPv6 tunnel: invoke-rc.d:
Package: dpkg
Version: 1.14.25
Severity: normal
Hello,
tspc doesn't wrk anymore. So if I try to remove it, dpkg delivers the following:
dpkg -r tspc
(Reading database ... 175350 files and directories currently installed.)
Removing tspc ...
Shutting down IPv6 tunnel: invoke-rc.d: initscript
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Moritz Muehlenhoff schrieb:
On Wed, Jan 21, 2009 at 08:59:05PM +0100, Juergen Kosel wrote:
Package: xine-ui
Version: 0.99.5+cvs20070914-2.1~lenny1
Severity: normal
Hello,
since the update of xine-ui 0.99.5+cvs20070914-2.1 to
0.99.5
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Eric Dorland schrieb:
* Juergen Kosel (juergen.ko...@gmx.de) wrote:
I bet what is crashing on you is the flash player, reason #1 for
Iceweasel crashes.
So I need to find out which plugin causes the crash. And then redirect
the bugreport
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
it turned out, the the crash was caused by Adobe's libflashplayer.so.
So this bug can be closed.
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Mike Hommey schrieb:
On Thu, Apr 16, 2009 at 10:17:26PM +0200, Juergen Kosel wrote:
iceweasel crashes if javascript is enabled and some urls are loaded.
e.g.: http://www.heise.de/ct/
Try this part of the file reportbug should have
Package: iceweasel
Version: 3.0.6-1
Severity: normal
Hello,
iceweasel crashes if javascript is enabled and some urls are loaded.
e.g.: http://www.heise.de/ct/
It delivers the following debug output:
This GDB was configured as x86_64-linux-gnu...
(no debugging symbols found)
(gdb) patinate off
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
in /usr/share/doc/tspc/README.debian I read the following:
When configured as router, tspc used to generate an own radvd.conf
config file and to restart radvd with this configfile.
This is bad when the user already specified a radvd
Package: compiz
Version: 0.7.6-7
Severity: normal
Hello,
I have configured gdm to start 2 xservers.
They set DISPLAY to :0.0 and :1.0
When I try to start compiz in a terminal on display :1.0, it delivers the
following:
compiz --replace
[1] 5831
juer...@acer-ilzleite:~$ Checking for Xgl: not
Package: tspc
Version: 2.1.1-6.1
Severity: wishlist
Hello,
one of my computers connects to broker.freenet6.net and gets an personized
tunnel. With the tunnel is also a 64 bit prefix provided for my internal
network. The first address is assigned to eth1 of the computer with the tunnel.
Tspc also
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Craig Small schrieb:
On Sat, Nov 29, 2008 at 01:47:57PM +0100, Juergen Kosel wrote:
ruetsch44:/home/juergen# lpq
Get_local_host: hostname 'ruetsch44' bad
but querrying the DSL- router nameservice delivers the following:
ruetsch44:/home
Package: lprng
Version: 3.8.A-1.1
Severity: normal
Hello,
after my LAN configuration has changed, (a DSL router works as DHCP server
and assigns IPv4 addresses), I have removed the following line from /etc/hosts:
192.168.1.1 ruetsch44.priv.net.de ruetsch44
Which assigned the old IPv4 address
Package: vdr
Version: 1.6.0-7
Severity: important
Hello,
after the update of vdr in testing yesterday:
[AKTUALISIERUNG] vdr 1.6.0-6 - 1.6.0-7
the plugins of vdr do not work anymore:
Oct 6 18:53:01 acer-ilzleite vdr: [12839] VDR version 1.6.0-1 started
Oct 6 18:53:01 acer-ilzleite vdr: [12839]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Tobias Grimm schrieb:
Juergen Kosel wrote:
Oct 6 18:53:01 acer-ilzleite runvdr: stopping after fatal fail (vdr: DVD
drive not found: /var/cache/vdr/dvd)
And so vdr itself do not work.
I guess it is the same as the last time:
Bad
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Michel Dänzer schrieb:
On Mon, 2008-09-15 at 21:06 +0200, Juergen Kosel wrote:
has anyone an idea, how to track down this problem any further?
It might be interesting if you could try newer kernels or even an
upstream drm Git snapshot
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have compile linux 2.6.26 on my own and disabled heap randomization.
The help page of the config option Disable heap randomization says:
CONFIG_COMPAT_BRK:
Randomizing heap placement makes heap exploits harder, but it
also breaks ancient
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-5
Severity: normal
Hello,
I have bought a closed source software (Maple 5.1 from 1999). Which needs to be
installed and started within a sarge i386 chroot environment.
When trying to start xmaple it gives the following message to stderr:
Package: libwine-print
Version: 1.0.0-1
Severity: serious
Justification: Policy 5.6.10
Hello,
while trying to update libwine-print to 1.0.0-1 it triggers installation of lpr,
which causes deinstallation of lprng.
Aptitude says, libwine-print depends on:
--- cups-bsd | cupsys-bsd | lpr (NICHT
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
deinstallation and reinstallation of libwine-print solves the problem on
my system. So it is only a problem during upgrade.
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Sven Joachim schrieb:
severity 499814 normal
tags 499814 + moreinfo
thanks
Am 22.09.2008 um 18:53 schrieb Juergen Kosel:
Package: libwine-print
Version: 1.0.0-1
Severity: serious
Justification: Policy 5.6.10
I fail to see
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have the same problem with iceweasel. But also other applications like
evience do not print to printer.
So I guess this bug should be reassigned. (Would gtk be the correct
package to assign the bug?)
Greetings
jürgen
-BEGIN PGP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Andrea Vettorello schrieb:
On Thu, Aug 14, 2008 at 9:11 PM, Juergen Kosel [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Andrea Vettorello,
Hi
do the hangs on your machine appear under the same
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
a few days ago I had downgraded xserver-xorg-video-ati to 1:6.6.3-2
which also caused a downgrade of nearly all other xorg packages to the
versions of stable. This also disabled the gl stuff and compiz.
During this time I haven't seen any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Torsten Werner schrieb:
severity 468954 serious
forcemerge 463954 486491
have you merged the correct bugs? (It looks like the digit '8' became '3')
thanks
On 2008-03-02, Juergen Kosel wrote:
after updating enigmail to 2:0.95.0+1-3.1
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
it happened again.
This time I tried to close a knotify window. (Maybe I have missed the
OK Button. But I don't believe that this is it.)
Beside the panel-applets, there were only a few programms running within
my gnome/compiz session:
Package: xorg
Version: 1:7.3+12
Severity: important
Hello,
since a few days, xorg occassionally occupies the whole available CPU time,
which makes the system unusable. It is even impossible to stop the xorg process
with kill -9 ...!
In /var/log/Xorg.0.log.old I see the following last messages:
Package: vdr
Version: 1.6.0-4
Severity: important
Hello,
after the following updates in testing it was not longer possible to use
the vdr plugin within xine:
Werde 17 Pakete installieren und 0 Pakete entfernen.
287kB werden auf der Festplatte belegt werden
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
maximilian attems schrieb:
On Mon, 12 May 2008, Juergen Kosel wrote:
hmmm guess not many testers then ;)
could you please file a bug report upstream bugzilla.kernel.org
the ide maintainer is quite active and they'll sort
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
after reading #485775, I have also updated libdecoration0 to the current
version in sid. This solves the problem.
So it is the same problem as in #485775.
Greetings
Jürgen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I had the same problem (reported as 484123, please merge).
The packet compiz-plugins depends on libedocration0 = 0.5.0
But with libedocration0 0.6.3~git20080115.0ea58487-1 from testing it
does not work!
So it seems to me, that it must depend
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
the bug has been fixed upstream; git id:
066519068ad2fbe98c7f45552b1f592903a9c8c8
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Julien Cristau schrieb:
On Mon, Jun 9, 2008 at 22:35:57 +0200, Juergen Kosel wrote:
Hello,
whenn calling compiz --replace, it delivers the following output:
...
Checking for Xgl: not present.
Starting gtk-window-decorator
/usr/bin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Brice Goglin schrieb:
Juergen Kosel wrote:
But the Window decorations are still missing - Which makes compiz
difficult to use.
Is the decoration plugin loaded?
See http://bgoglin.livejournal.com/11253.html
at least compiz is configured
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Bartlomiej Zolnierkiewicz has provided a patch, which solves the problem:
http://bugzilla.kernel.org/show_bug.cgi?id=10723#c30
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
whenn calling compiz --replace, it delivers the following output:
compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for
Package: compizconfig-backend-kconfig
Version: 0.7.4-2
Severity: important
Hello,
after the following updates, compiz becomes unusable (missing decorations etc):
Aptitude 0.4.11.2: Protokoll
So, Jun 1 2008 16:28:45 +0200
WICHTIG: Dieses Protokoll zeigt nur geplante Aktionen an. Aktionen, die
Package: imagemagick
Version: 7:6.3.7.9.dfsg1-2+b2
Severity: normal
Hello,
with convert from imagemagic in Debian stable it is possible to change the size
of a picture with this call:
convert -geometry 150x150+0+0 infile.jpg outfile.jpg
But with convert in Lenny this is not longer possible,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
maximilian attems schrieb:
On Mon, 12 May 2008, Juergen Kosel wrote:
This disk belongs to a _very_ old Laptop ( 10 years) which used only
for testing purposes. I don't worry if it doesn't run anymore.
So if this is the only one
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello;
On Fri, 11 Apr 2008, Juergen Kosel wrote:
Package: linux-image-2.6.24-1-486
Version: 2.6.24-5
Severity: important
how is 2.6.25 doing.
except that the output is formated different, itz behaves the same: It
fails to mount the disk
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: chkrootkit
Version: 0.48-2
Severity: important
Hello,
after upgrading chkrootkit to 0.48-2 it generates now the following output:
The following suspicious files and directories were found:
/usr/lib/jvm/.java-gcj.jinfo
Package: xscreensaver
Version: 5.04-2
Severity: critical
Justification: breaks the whole system
Hello,
when /usr/lib/xscreensaver/interaggregate was started,
the local console with gnome session became unusable.
From a remote ssh session I saw, that all memory (1 GB RAM + 1.4 GB swap)
were
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I have started interaggreagate to reproduce the problem again.
It seems to me that it is related to compiz: If compiz doesn't run,
everything is fine.
But with compiz there are also other screensavers which cause the
problem, e.g.
Package: compiz
Version: 0.6.3~git20080115.0ea58487-1
Severity: critical
Justification: breaks the whole system
Hello,
when /usr/lib/xscreensaver/interaggregate was started,
the local console with gnome session became unusable.
From a remote ssh session I saw, that all memory (1 GB RAM + 1.4 GB
Package: grub
Version: 0.97-36
Severity: normal
Hello,
after the update of grub from 0.97-32 to 0.97-36,
it ommits on one of my computers the base path /boot/ from the kernel entries.
So it comes to this entry:
title Debian GNU/Linux, kernel 2.6.24-1-486
root(hd0,3)
kernel
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
in /usr/sbin/update-grub I have found around line 140:
# figure out where grub looks for the kernels at boot time
kernel_dir=/boot
if [ $boot_device != $root_device ] ; then
kernel_dir=
fi
So for my machine the kernel_dir is correct
Package: lprng
Version: 3.8.A~rc4-3
Severity: normal
Hello,
after updating lprng from 3.8.28dfsg.1-1.1 - 3.8.A~rc4-3
it locks like that it doesn't listen anymore to port 515.
When invoking lpq on a remote host, the error message on the remote host is:
cannot open connection - Connection refused
Package: linux-image-2.6.24-1-486
Version: 2.6.24-5
Severity: important
Hello,
the kernel linux-image-2.6.24-1-486 fails to mount the ext3 rootfs
on a (dino) laptop Compac Amada 4120.
The output shortly before the kernel panic is the following:
JBD: novalid journal superblock found
EXT3-fs:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Robert Luberda schrieb:
Juergen Kosel writes:
Hi,
when solid-pop3d was updated from 0.15-18 to0.15-19 by aptitude/dpkg,
the confguration of this package does not terminate (It runs for hours
until manually stopped by ctrl-c
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
after the second line in /etc/inetd.conf of solid-pop3d has been
commented out, the package configuration successfully terminates.
Greetings
Juergen
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG
Package: solid-pop3d
Version: 0.15-19
Severity: normal
Hello,
when solid-pop3d was updated from 0.15-18 to0.15-19 by aptitude/dpkg,
the confguration of this package does not terminate (It runs for hours
until manually stopped by ctrl-c).
Maybe the config tool is confused by this lines in
Package: gnucash
Version: 2.2.3-2
Severity: normal
Hello,
if papersize A4 and paperlayout landscape is choosen for printing,
gnucash layouts the pages to fit in landscape. But it does not produce
landscape (postscript) output. Instead there is a lot of white space at
top of the page and it
Package: enigmail
Version: 2:0.95.0+1-3.1
Severity: normal
Hello,
after updating enigmail to 2:0.95.0+1-3.1, icedove claims that enigmail 0.94.2
is installed. Which is incompatible with icedove 2.0.0.9
For me it looks like one step is missin g in the update from enigmail 2:0.94.2-2
so enigmail
Hello,
it is nearly the same as before:
gnucash on amd64 fails to retrieve prices for Fonds arideka
(DE0008474511) from DEKA investments.
But it succeeds if the i386 variant is started within a chroot.
So could you please give me a hint, what settings may be wrong?
Greetings
Juergen
1 - 100 of 146 matches
Mail list logo
