33:94:d8
Slave queue ID: 0
Slave Interface: eth3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 90:b1:1c:33:94:d9
Slave queue ID: 0
--
richard lucassen
http://contact.xaq.nl/
Quick & Dirty workaround:
Add a line in /etc/network/if-pre-up.d/ifenslave just under #!/bin/sh
BOND_MASTER=$IFACE
The BOND_MASTER variable is empty.
--
richard lucassen
http://contact.xaq.nl/
I also have these messages but I think they are likely false
positives. There seems to be a lot of possibly misleading information
and advice on the internet about these warnings -- would love to her
your advice on this, but i think these are mostly false positives
* am i right in suspecting that
Is there a recommended alternative way to implement greylisting with exim?
On Wed, 3 Jun 2020 at 14:18, Eugene Berdnikov wrote:
>
> Hi.
>
> On Wed, Jun 03, 2020 at 02:01:33PM +0200, Benedikt Spranger wrote:
> > Hi,
> >
> > are there any updates or is more help needed?
>
> Unfortunately, this pa
I noticed that https://github.com/raoulbhatia/backuppc copies
https://metacpan.org/pod/SCGI and https://metacpan.org/pod/SCGI::Request into
the backuppc source code. I packaged those modules in a new libscgi-perl
package so that they can be brought in as dependencies instead. I need a
sponsor
Oops, the VCS link should have said:
https://salsa.debian.org/rhansen/libscgi-perl
:
https://mentors.debian.net/package/libscgi-perl
Alternatively, one can download the package with dget using this command:
dget -x
https://mentors.debian.net/debian/pool/main/libs/libscgi-perl/libscgi-perl_0.6-1.dsc
Changes since the last upload:
* Initial release.
Regards,
--
Richard Hansen
Package: libauthen-sasl-perl
Version: 2.1600-1
Severity: important
Dear Maintainer,
I have a Perl script to read from an OpenLDAP instance using Net::LDAP
with a GSSAPI bind. The script works fine on Debian stretch but fails on
Debian buster.
Note that on both servers the line at the bottom of t
r. That would show all the datasets involved and
their properties and would allow testing the generator to see what units
it is producing for you.
--
Richard
signature.asc
Description: OpenPGP digital signature
e a copy of your cache file(s) from /etc/zfs/zfs-list.cache?
--
Richard
signature.asc
Description: OpenPGP digital signature
s. (Closes: #804975)
.
[ Christian Hofstaedtler ]
* Bump Standards-Version to 3.9.8 (no changes required)
* Update Vcs-Browser, Vcd-Git to use https URLs
.
[ Richard Hansen ]
* Refresh patches via 'gbp pq'
* New upstream version 3.9.0
* Refresh patches
* Add dependency
Package: apt-show-versions
Version: 0.22.11
Severity: normal
Tags: patch
Dear Maintainer,
On some systems, when i type
apt-show-versions TAB
I get
'apt-show-versions bash: completion: function _apt_show_versions' not found'
despite having bash-completion installed. This seems to be because t
sec?
Almost certainly not. NTPsec removed the broadcast mode stuff. I've
emailed upstream to confirm.
> And congrats to becoming a DD :-)
Thanks!
--
Richard
signature.asc
Description: OpenPGP digital signature
.
The BIOS UUID is not reliable. I have a bunch of SuperMicro systems with
the same UUID.
I suggest using /etc/machine-id when present (i.e. systemd systems).
See also:
https://github.com/openzfs/zfs/issues/9367
--
Richard
signature.asc
Description: OpenPGP digital signature
Package: dupload
Version: 2.9.4
Severity: wishlist
Dear Maintainer,
In dupload.conf, mailto sends a mail for duploads to stable and mailtx
works for unstable and experimental, but there's nothing for
non-standard (eg private distributions/names).
Perhaps a 'mailty' is needed?
gnored.
#
# (if it is meant to be like this, i think the manpage should be
# updated?)
Thanks
Richard
-- System Information:
Debian Release: 10.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.1
fallback script, which puts them in alphabetical order.
--
Richard Fearn
richardfe...@gmail.com
fallback script, which puts them in alphabetical order.
--
Richard Fearn
richardfe...@gmail.com
in a more conformant manner.
(The openbox package would then probably need to gain a dependency on
python3-xdg, as currently it has none.)
--Daniel
--
Daniel Richard G. || sk...@iskunk.org
My ASCII-art .sig got a bad case of Times New Roman.
Source: openldap
Severity: normal
Dear Maintainer,
The Debian openldap source package page has a link to the buster-backports
distribution:
https://packages.debian.org/source/buster-backports/openldap
Clicking on that link results in this error: "Internal Server Error"
-- System Information:
D
Source: openldap
Severity: normal
Dear Maintainer,
Please backport the "limit depth of nested filters" patch
(ITS-9202-limit-depth-of-nested-filters.patch) to the stretch-backports
version of openldap.
-- System Information:
Debian Release: 10.3
APT prefers stable-updates
APT policy: (500, '
Package: sensible-utils
Version: 0.0.12
rjk@sfere:~$ env | grep -E 'EDITOR|VISUAL'
rjk@sfere:~$ ls -lL /usr/bin/emacs
-rwxr-xr-x 1 root root 39926024 Sep 5 2019 /usr/bin/emacs
rjk@sfere:~$ sensible-editor
/usr/bin/sensible-editor: 25: /usr/bin/sensible-editor:
/usr/bin/emacs24: not found
/usr
Package: fakechroot
Version: 2.19-3.2
Severity: normal
Dear Maintainer,
I attempted to use fakechroot to build a VM image without requiring root or
special kernel features.
I had this working, but it began failing in a more limited CI environment.
The image was unbootable because the initramfs di
Sounds like protected_regular from
https://www.kernel.org/doc/Documentation/sysctl/fs.txt
ttfn/rjk
orwarded this to secur...@ntpsec.org. We'll see what they say.
--
Richard
signature.asc
Description: OpenPGP digital signature
I noticed this issue, and thought it might be useful to point out that this is
clearly a new compiler bug.
From the first fatal error in the full log:
NSGraphicsContext.m: In function ‘+[NSGraphicsContext(Private)
_initializeMethodTable]’:
NSGraphicsContext.m:532:42: error: expected ‘)’
is many times more popular.
Can -s be made the default in /etc/default/openntpd ?
--Daniel
--
Daniel Richard G. || sk...@iskunk.org
My ASCII-art .sig got a bad case of Times New Roman.
Package: graphite-api
Version: 1.1.3-2+deb9u1
With a target of:
movingAverage(alias(snmp.escalabra.snmp.if_octets-Slot__0_Port__2_Gigabit_-_Level.rx,
'g2 rx'), '5min')
...I get an exception from graphite. It's the same one shown here:
https://github.com/brutasse/graphite-api/issues/201
The
Update: This is the full output of `systemctl show mnt-backup.mount`,
it was truncated in my previous message.
TimeoutUSec=1min 30s
ControlPID=0
DirectoryMode=0755
SloppyOptions=no
LazyUnmount=no
ForceUnmount=no
Result=success
UID=[not set]
GID=[not set]
MemoryCurrent=[not set]
CPUUsageNSec=[not s
On 22/03/2020 16:21, Marco d'Itri wrote:
On Mar 22, Richard Kettlewell wrote:
Patch attached.
Did you verify that everything will still work with no empty filters
provided and so on?
If there is no filter file present (or one that it can't import) it logs
a message about i
Package: inn2
Version: 2.6.3-1+deb10u2
Patch attached.
ttfn/rjk
commit 1adddef4321b996e08aa65a6b662eac4f58211fe
Author: Richard Kettlewell
Date: Sun Mar 22 13:52:09 2020 +
Enable Python 3.x filter
diff --git a/debian/control b/debian/control
index f1ac510..1ffc40f 100644
--- a
Package: inn2
Version: 2.6.3-1+deb10u2
$ /usr/lib/news/bin/buildinnkeyring
--2020-03-21 10:31:58-- ftp://ftp.isc.org/pub/pgpcontrol/PGPKEYS
=> 'PGPKEYS'
Resolving ftp.isc.org (ftp.isc.org)... 2001:4f8:1:f::49, 149.20.1.49
Connecting to ftp.isc.org (ftp.isc.org)|2001:4f8:1:f::49|:21...
tags 939739 patch
Attached is a patch to fix this.
Also attached is a debdiff for an NMU that fixes this and some other
small issues.
--
Richard
diff -Nru openipmi-2.0.25/debian/openipmi.init openipmi-2.0.25/debian/openipmi.init
--- openipmi-2.0.25/debian/openipmi.init 2018-05-19 04:04
On 3/7/20 12:19 AM, Richard Laager wrote:
> Also attached is a debdiff for an NMU that fixes this and some other
> small issues.
Updated NMU debdiff attached. This one sets Rules-Requires-Root: no.
--
Richard
diff -Nru rng-tools-5/debian/changelog rng-tools-5/debian/changelog
--- rng-t
Attached is a patch to fix this.
I also submitted it as a merge request:
https://salsa.debian.org/python-team/modules/python-humanize/-/merge_requests/2
--
Richard
From 1b7c39261508f7652c8e767a591786a7c2349f20 Mon Sep 17 00:00:00 2001
From: Richard Laager
Date: Sat, 7 Mar 2020 00:35:56 -0600
tags 919412 patch
Attached is a patch to fix this.
Also attached is a debdiff for an NMU that fixes this and some other
small issues.
--
Richard
diff -Nru rng-tools-5/debian/control rng-tools-5/debian/control
--- rng-tools-5/debian/control 2018-12-02 04:00:52.0 -0600
+++ rng-tools-5
is a previous changelog entry
and it also trips the same check. That way, people would be flagged on
A) new packages, and B) if they change to this version format.
--
Richard
signature.asc
Description: OpenPGP digital signature
Package: timeshift
Severity: normal
Dear Maintainer,
A recent post suggested use of timeshift. I went to packages.debian.org and
the online version of the man page for descriptive information without
finding the information desired.
On https://packages.debian.org/buster/timeshift I clicked o
evel directory in its
tarball. This makes it possible to distinguish pristine tarballs from
repackaged ones."
--
Richard
Source: cyrus-sasl2
Version: 2.1.27+dfsg-1+deb10u1
Severity: normal
Dear Maintainer,
When building the cyrus-sasl2 source package version 2.1.27+dfsg-1+deb10u1
we get the error
/bin/sh: krb5-config.heimdal: command not found
make: krb5-config.heimdal: Command not found
We are using "gbp buildp
ally selected to be a different week than mdadm just in case the
user has both in use.)
--
Richard
Note a workaround is to specify the full path for the include directory:
Include /home/richard/.ssh/config.d/*
Richard
Package: clusterssh
Version: 4.13.2-2
Severity: normal
Tags: upstream
Dear Maintainer,
My .ssh/config contains a single line:
Include config.d/*
config.d then naturally contains all my actual config files.
read_ssh_file appears not to cope with this, and I get this:
richard@zircon:~$ cssh
ing: none of the builtin format modules handle input file:
[24bit.wav]
shnsplit: error: cannot continue due to error(s) shown above
A similar problem has been reported before (2014):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769585
Richard
-- System Information:
Debian Release: bullse
found this page:
https://superuser.com/questions/1243374/shntool-splits-wav-files-at-the-wrong-split-points
When applying m:ss:fff it works.
Richard
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Ker
Package: znc
Version: 1.7.5-1~bpo10+1
Severity: important
Dear Maintainer,
The ZNC package now ships with a system user called `_znc`, rather than
`znc`. This is causes an issue when oidentd is installed and the default
configuration is not overridden. Most IRC networks will treat `_znc` as
an in
this, /dev/ipmi0 exists. The issue is that
ipmievd is starting before the ipmi drivers are loaded. The ipmi
modules are loaded by openipmi.service.
Adding the following to ipmievd.service solves the problem:
[Unit]
After=openipmi.service
--
Richard
Package: wnpp
Severity: wishlist
Owner: Richard Laager
* Package name: talkatu
Version : 0.1.0-dev
Upstream Author : Gary Kramlich
* URL : https://bitbucket.org/rw_grim/talkatu/
* License : GPL-2+
Programming Lang: C
Description : GTK+ widgets for
Package: wnpp
Severity: wishlist
Owner: Richard Laager
* Package name: gplugin
Version : 0.29.0
Upstream Author : Gary Kramlich
* URL : https://bitbucket.org/rw_grim/gplugin/
* License : GPL-2+
Programming Lang: C
Description : GObject based plugin
Package: wnpp
Severity: wishlist
Owner: Richard Laager
* Package name: libgnt
Version : 2.14.0-devel
Upstream Author : Pidgin Developers
* URL : https://bitbucket.org/pidgin/libgnt/
* License : GPL-2+
Programming Lang: C
Description : GLib Ncurses
that was written).
"OpenZFS is a storage platform that encompasses the functionality of
traditional filesystems and volume managers. It supports data checksums,
compression, encryption, snapshots, and more."
[1] https://packages.debian.org/sid/zfsutils-linux
[2] https://github.com/zfsonlinux/zfs/wiki/FAQ#what-is-zfs-on-linux
--
Richard
Package: matrix-synapse
Version: 1.8.0-1
I am one of the upstream maintainers of this package.
I note that, since v0.99.2 or so, the Debian package has shipped with a
log config which disables any logging below WARNING, and some below ERROR.
We have recently had a number of users approach us
anks. I'm going to dupload a thoroughly modernized CLN package now. If
you could have a look at it, this would be appreciated.
-richy.
--
Richard B. Kreckel
<https://in.terlu.de/~kreckel/>
in /usr/lib/?
-richy.
--
Richard B. Kreckel
<https://in.terlu.de/~kreckel/>
On Fri, 1 Jun 2018 01:10:10 +0200 "Richard B. Kreckel"
wrote:
> On 05/24/2018 11:54 PM, Richard B. Kreckel wrote:
> > Aha! The problem goes away when upgrading to Xorg 1.20.
>
> Oh, the problem has re-surfaced after a recent burst of debian/testing
> upgrades. :(
T
er
correction. This would be in line with what mdadm does (at least now).
--
Richard
signature.asc
Description: OpenPGP digital signature
Package: dovecot-core
Version: 1:2.3.4.1-5+deb10u1
Severity: normal
The file /lib/systemd/system/dovecot.service contains the line
PIDFile=/var/run/dovecot/master.pid
The directory /var/run is considered legacy since Debian buster. Please
change this to /run
-- Package-specific info:
-- System
Package: fail2ban
Version: 0.10.2-2.1
Severity: normal
The file /lib/systemd/system/fail2ban.service contains 2 lines that use the
legacy /var/run directory:
ExecStartPre=/bin/mkdir -p /var/run/fail2ban
PIDFile=/var/run/fail2ban/fail2ban.pid
Please change them to use /run instead.
-- System Inf
Package: mariadb-server-10.3
Version: 1:10.3.18-0+deb10u1
Severity: normal
In /lib/systemd/system/mariadb.service and /lib/systemd/system/mariadb@.service
the line
ExecStartPre=/usr/bin/install -m 755 -o mysql -g root -d /var/run/mysqld
should use /run/mysqld since /var/run is considered legacy
Package: unattended-upgrades
Version: 1.11.2
Severity: normal
/lib/systemd/system/unattended-upgrades.service contains this line:
RequiresMountsFor=/var/log /var/run /var/lib /boot
However on buster there is no mount point for /var/run, but for /run
-- System Information:
Debian Release: 10.2
On Thu, Dec 12, 2019 at 11:01:02AM +0100, Vincent Danjean wrote:
> [resend to the good (cloned) bug, sorry for the message in the original bug,
> it was a mistake]
>
> Hi,
>
> On Thu, 5 Dec 2019 11:12:56 + "Richard W.M. Jones"
> wrote:
> > I believe
I just had to resort to modifying /etc/bash.bashrc which is really ugly IMHO.
Is there anything I can do to make this functionality sane in Debian?
Kind regards,
Richard van den Berg
Package: qemu-system-x86
Version: 1:3.1+dfsg-8+deb10u3
Severity: important
Tags: patch upstream
Dear Maintainer,
Title says it all.
The problem has been fixed upstream.
See https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg02774.html
for the details.
Thanks.
s not happening then it's
a build issue on Debian of some kind.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
bui
If someone is working on this, I'm happy to test at least, and possibly
help a bit with packaging. I'm not currently in a position to take on
any of the nodejs stuff nor do I likely have the time to really commit
to packaging homeassistant's many Python dependencies.
--
Richard
Is it your intention to package ansible_mitogen as part of this effort?
If you need help or testing, please let me know.
--
Richard
I've cloned this issue into a new bug.
On 11/26/19 12:44 PM, Stephan Seitz wrote:
> On Mo, Nov 18, 2019 at 09:05:35 -0600, Richard Laager wrote:
> Ah, concerning the apparmor policy: I had to do a manual overwrite for
> ntp.keys (default only in /etc):
> /etc/ntpsec/ntp.keys r,
4 machines.
Richard.
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (
s-wise.
I'm going to upload to backports very soon. I need to do some due
diligence with the apparmor policy, but this should otherwise be
straightforward. I'd almost go so far as to say "trivial", but there are
a couple of administrative hoops to jump through.
--
Richard
related to the above.
I'll proceed with the upload.
--
Richard
diff -Nru ntpsec-1.1.3+dfsg1/debian/changelog
ntpsec-1.1.3+dfsg1/debian/changelog
--- ntpsec-1.1.3+dfsg1/debian/changelog 2019-02-04 01:38:48.0 -0600
+++ ntpsec-1.1.3+dfsg1/debian/changelog 2019-11-18 00:04:00.0
;Install', 'RequiredBy',1)
or $self->extract_service_file_values($file, 'Install', 'Also',1)
or $is_oneshot
- or $is_standalone
+ or not $is_standalone
or $file !~ m,^lib/systemd/[^\/]+/[^\/]+\.service$,
or $file =~ m,@\.service$,;
--
Richard
Package: collectd-core
Version: 5.9.2.g-1
# dpkg --configure collectd-core
Setting up collectd-core (5.9.2.g-1) ...
Job for collectd.service failed because the control process exited with
error code.
See "systemctl status collectd.service" and "journalctl -xe" for details.
invoke-rc.d: initscript
I was able to get a stack trace and reported this upsteam at
https://jira.mariadb.org/browse/MDEV-21010
I found the debug packages in
http://debug.mirrors.debian.org/debian-debug/pool/main/m/mariadb-10.3/
It seems I broke my apt preferences so it could not find them automatically.
Running mysqld now with a gdb on standby...
Any pointers to where I can find mariadb-server-core-10.3 for buster with debug symbols would be
appreciated.
units that are launched by .timer and .path
> units. So it would be nice if the
> systemd-service-file-missing-install-key was similarly not emitted in
> these cases.
--
Richard
Package: intel-mkl
Version: 2019.2.187-1
Severity: normal
Tags: upstream
Dear Maintainer,
Hi there! I was testing MKL's LAPACK routines as an alternative to ATLAS and
found regression test failures. The apparently worst issue was that the
complex SVD of 2x2 matrix ((1 0) (0 -2i)) gives singular v
Package: lintian
Version: 2.32.0
Severity: normal
To fix #933109, lintian no longer emits
package-supports-alternative-init-but-no-init.d-script when there is a
.service and .timer pair.
I would like to see this extended to also include a .service and .path
pair. Just as with a .timer, if a .path
upload, which should be in a couple of days.
--
Richard
signature.asc
Description: OpenPGP digital signature
I had looked at https://wiki.debian.org/HowToGetABacktrace but I might
be missing something obvious.
https://packages.debian.org/search?keywords=mariadb-server-core-10.3
shows mariadb-server-core-10.3-dbgsym to be only available for sid, but
I am on buster.
# apt update
Hit:4 http://deb.debian.or
er thing to do with these
type of crashes is to provide a gdb trace. Unfortunately I am not able
to find dbg versions of the mariadb-server-10.3 and
mariadb-server-core-10.3 debian packages. Are they available somewhere?
Kind regards,
Richard
Package: mariadb-server-10.3
Version: 1:10.3.17-0+deb10u1
Severity: important
I run mysqldump (through automysqlbackup) daily. Several times per week
during this backup mysqld hangs. The process however stays running and still
accepts TCP and socket connections, however no SQL queries are ever
ans
I don't understand why this bug has come back.
The error is here:
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports C++11 features by default... yes
checking for OPENCV... no
checking for OPENCV... no
checking for OPENCV... no
configure: error: opencv not found. Not
iso files ( i.e. today I tried
running debian-live-testing-amd64-gnome+nonfree.iso with a last modified
date of 2019-10-14) and they all return the same errors I reported on
September 21, 2019.
Richard
From: Richard Cracknell
Sent: Sunday, October 13, 2019 11:32 AM
Subject: FOR YOUR INFORMATION
Hi, you have been selected to receive a financial-donation. Contact
maviswan...@gmail.com<mailto:maviswan...@gmail.com> for more info and claim.
On 08.10.19 23:35, Pino Toscano wrote:
> libcln-dev depends on some packages which are not strictly needed as
> such:
> - g++: even though cln is a C++ library, usually -dev packages with
> includes do not require a certain compiler, which is chosen by the
> user
In theory, it should depend on
Control: tags -1 - moreinfo
Infos were provided...
yload type (requested:
sp(0); present: sp(0))
2. After installation of kdepim-runtime everything works fine.
Richard
Package: libcharon-extra-plugins
Version: 5.5.1-4+deb9u4
Severity: important
Dear Maintainer,
I installed libcharon-extra-plugins, restarted strongswan.
$ sudo systemctl restart strongswan
$ sudo swanctl --reload-settings
$ sudo swanctl --load-all
But eap-mschapv2 was not loaded.
$ sudo
tes the body text to match, including mentioning the server argument(s).
--
Richard
diff -Nru ntpsec-1.1.3+dfsg1/debian/changelog
ntpsec-1.1.3+dfsg1/debian/changelog
--- ntpsec-1.1.3+dfsg1/debian/changelog 2019-02-04 01:38:48.0 -0600
+++ ntpsec-1.1.3+dfsg1/debian/changelog 2019-10-04 00:21:09.0
Package: kalarm
Version: 4:18.08.3-1
Severity: important
Dear Maintainer,
When installing kalarm on mate desktop environment, program is not working. It
shows just message
"The Akonadi personal information management service is not running. This
application cannot be used without it". Pressing bu
Package: wnpp
Owner: Cyril Richard
Severity: wishlist
X-Debbugs-Cc: debian-de...@lists.debian.org,debian-scie...@lists.debian.org
* Package name: spview
Version : 2.0.0~beta1
Upstream Author : Cyril Richard
* URL : https://gitlab.com/lock042/spview
* License
Package: libwebkit2gtk-4.0-37
Version: 2.26.1-1
Severity: normal
Dear Maintainer,
apt install surf and libwebkit2gtk-4.0-37 (2.26.1) from experimental:
Using "surf":
surf http://tmp.xaq.nl/test-aac.html
Will only play a few seconds or not at all. The package
libwebkit2gtk-4.0-37-gtk2_2.24.0 w
This is:
https://github.com/zfsonlinux/zfs/issues/8306
https://github.com/zfsonlinux/zfs/issues/9193
fixed by:
https://github.com/zfsonlinux/zfs/pull/9202
merged at:
https://github.com/zfsonlinux/zfs/commit/f335b8ff
which should be available in 0.8.2 when it releases.
--
Richard
omorrow. So hopefully it will land in the next point release.
--
Richard
ptop also does not
have the option to boot in BIOS/legacy mode.
So in summary, the only combination that didn't work was the Debian testing
with my laptop.
Please let me know if you require any additional information.
Richard
Package: python3-whisper
Version: 1.1.4-2
The whisper-resize script assumes Python 2, despite being in a python3-
package:
root@monitor:/var/lib/graphite/whisper/snmp# whisper-resize --nobackup
--aggregate
./escalabra/snmp/if_octets-Slot__0_Port__4_Gigabit_-_Level/rx.wsp 10s:1d
1m:7d 10m:1y
Retri
Upstream in:
https://github.com/libguestfs/libnbd/commit/2a955696cde1be60d468fdc662b4f70ec862b866
which will be in libnbd >= 1.0.1 & >= 1.1.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization
I'm seeing the same behavior in Ubuntu 18.04.
What looks like early termination, and no debug output.
The program is running though:
$ sudo strace corosync-qdevice -df
[...]
openat(AT_FDCWD, "/dev/shm/qb-votequorum-event-12248-19618-30-header",
O_RDWR) = 9
ftruncate(9, 8248)
Package: kdenlive
Version: 19.04.3-2
Followup-For: Bug #933367
If the package 'qml-module-qtqml-models2' is not installed, the track timelines
aren't rendered, making it impossible to use the
software. It's not marked as a package dependency, and has to be installed
manually ATM.
701 - 800 of 4038 matches
Mail list logo
