Package: nheko
Version: 0.11.3-2
Severity: normal
X-Debbugs-Cc: madhat...@teaparty.net
Dear Maintainer,
When images are posted from matrix.org homeservers, nheko can display
neither the image thumbnail nor the full-size image. Instead, one mostly
sees the "broken image" picture in place of the t
Package: bugs.debian.org
Severity: important
X-Debbugs-Cc: godsofficialmessen...@protonmail.com
Dear Maintainer,
I am reporting an issue which has led to systemd going into uninterruptable
sleep state D, causing programs like ps or pgrep
to hang indefinitely and greatly lengthening the response
Package: kdevelop
Version: 4:23.08.1-2+b2
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: tommyi...@yahoo.com
Dear Maintainer,
The most recent update to kdevelop (I believe around May 21st) makes this
program fail to start. I get the following error and then it exits:
kdevel
alize-config-config-file-version-37-is-newer-than-supported-version-35-if-this-is-expected-use-allow-newer-config-to-override/22250
*I used this command to un-brick syncthing by overwriting the fresh copy
from KALI LINUX:*
rm /usr/bin/syncthing
cp -f /media/tom/kali/usr/bin/syncthing /usr/bin/sync
On Sat, Jun 01, 2024 at 09:13:01AM +0200, Pascal Hambourg wrote:
>
> I don't know much about packaging, but comparing with other packages you may
> need to add the patch names to a file debian/patches/series. Or I guess you
> could just apply the patches manually with patch -p1 < patch" before
> b
On Fri, May 31, 2024 at 12:04:23AM +0200, Pascal Hambourg wrote:
>
> It seems that check-missing-firmware failed to identify the correct kernel
> module. At this point, can you post the output of
>
> ls -d /sys/bus/usb/drivers/ath9k_htc/3-3*
> ls -d /sys/bus/usb/devices/3-3/3-3*
During the instal
Package: installation-reports
Boot method: Netboot over TFTP
Image version: Debian version: 12 (bookworm); Installer build:
20230607+deb12u5; URLs:
https://deb.debian.org/debian/dists/bookworm/main/installer-amd64/current/images/netboot/netboot.tar.gz
+ https://cdimage.debian.org/cdimage/firmwa
Package: nethack-console
Severity: wishlist
Dear Maintainer,
About 23 years ago I suggested a package for Nethack that needed no X11 libs,
and I suggested nethack-console as a name. Is there a Debian precedent for
this type of package name? Maybe nethack-tty or nethack-nox are better names?
I'v
It's actually upstream. I ran the same:
$ make bindeb-pkg
on the upstream source as I did on the Debian source, and yes, it gave me .deb
packages.
Here's the repo for the upstream script that was part of the problem:
https://github.com/torvalds/linux/commits/master/scripts/package/builddeb
This works in the 6.8.9 upstream kernel. So I guess the good news is it wil be
fixed in Debian eventually.
Package: linux-source-6.7
Version: 6.7.12-1
Severity: normal
X-Debbugs-Cc: to...@dilacero.org
Dear Maintainer,
I'm following the directions at the Kernel Handbook, "4.2. Building a custom
kernel from Debian kernel source".
I apt-get installed: linux-source libncurses-dev pahole
I configured wi
Package: squeak-vm
Version: 1:4.10.2.2614+20120917~dfsg-1+b1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
I was testing out Debian Junior programming applications.
* What exactly did you
That does match my image. I cannot reproduce the error any longer, I'm
wondering if it had to do with an existing windows installation on my
device which has now been replaced with a debian install. I remember it was
a file in the grub folder but i can't remember which one.
On Sun, Mar 10, 2024 at
On Tue, Feb 20, 2024 at 10:54:04 +0100, Simon Josefsson wrote:
> Tom Parkin writes:
>
> > Hi folks,
> >
> > Would someone mind please reviewing and uploading
> > golang-github-katalix-go-l2tp 0.1.7-1?
> >
> > https://salsa.debian.org/go-team/package
regression to the
stable kernel which at least Debian Bookworm is running.
Once we have a fix for the kernel regression we can re-enable the unit
test, but for the time being removing the test is the most direct
approach for addressing the CI failures captured by #1063746.
Thanks and best regards,
Tom
I believe the root cause of this issue is this backported kernel
commit:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/l2tp/l2tp_ip6.c?h=linux-6.1.y&id=f6a7182179c0ed788e3755ee2ed18c888ddcc33f
The commit is present from Linux v6.6 onwards and has been backported
to a
close 1060373 4.7.2+ds-2
thanks
Hi Marc
Thanks for pointing this out. Rebuilding the package under sid (which
happened with the new latest upload) has resolved the issue.
Regards
Tom
next week.
Regards
Tom
On Wed, 17 Jan 2024 at 10:44:52 +, Simon McVittie wrote:
On Wed, 17 Jan 2024 at 10:21:09 +0100, Tom Kleingeld wrote:
Package: gir1.2-freedesktop
Version: 1.78.1-10
Apt removes gnome-shell, gnome-session, gdm and others (gnome) and breaks
system
I tried upgrading a GNOME virtual machine
Package: gir1.2-freedesktop
Version: 1.78.1-10
Apt removes gnome-shell, gnome-session, gdm and others (gnome) and
breaks system
My systems are usr-merged, but I'm saddened by the appearance of
vindictiveness in the response to this bug report. Independently of
the reporter's system being usr-unmerged, it's technically incorrect
for the alternatives system to use "/bin/{nc,netcat}" and
"/bin/netcat-traditional" rather than "
On Wed, Oct 18, 2023 at 02:21:48 +0530, Nilesh Patra wrote:
> On Tue, Oct 17, 2023 at 09:27:38PM +0100, Tom Parkin wrote:
> > On Wed, Oct 18, 2023 at 01:38:58 +0530, Nilesh Patra wrote:
> > > I've uploaded your package to NEW. However, please look at my commits.
>
.h!
Should I merge these changes on debian/sid?
> I also have a quick question -- is the interface of the library somehow
> architecture dependent? if so the "M-A: foreign" field should be
> dropped.
No, it shouldn't be.
> Thanks for your contribution!
Thanks again fo
resolved on the tooling side[4].
Further review comments welcome and thank you for your help to date.
Best regards,
Tom
[1]. https://salsa.debian.org/go-team/packages/golang-github-katalix-go-l2tp
[2]. https://github.com/nm-l2tp/NetworkManager-l2tp
[3]. https://lists.debian.org/debian-go/2023/09
Package: systemd-journal-remote
Version: 254.5-1
Severity: normal
Dear Maintainer,
After upgrading a test host from stable to testing, I noticed
systemd-journal-upload
stopped sending logs to my logging host running Debian stable. The test
host notes that the service is killed for watchdog failu
Package: systemd-journal-remote
Version: 254.5-1
Severity: normal
Dear Maintainer,
After upgrading a test host from stable to testing, I noticed
systemd-journal-upload stopped sending logs to my logging host running
Debian stable. The test host notes that the service is killed for
watchdog failur
WIP Debian packaging support here: https://github.com/katalix/go-l2tp-debian
Package: wnpp
Severity: wishlist
Owner: Tom Parkin
X-Debbugs-Cc: debian-de...@lists.debian.org
* Package name: golang-github-katalix-go-l2tp
Version : 0.1.1
Upstream Contact: Tom Parkin
* URL : https://github.com/katalix/go-l2tp
* License : BSD
Programming
rs could respond.
On Tue, Aug 29, 2023 at 10:33:40AM -0400, we recorded a bogon-computron
collision of the flavor, containing:
> Christoph,
>
> de Dave KB3EFS
>
> Keeping the B-D is a must so that offline maps can be built from online
> sources provided by the U.S. Governmen
e($dir, "$dir~~delete~usrmerge~~")) {# XXX race
to
mv($dir, "$dir~~delete~usrmerge~~"); if (0) {# XXX race
2. Run /usr/lib/usrmerge/convert-usrmerge
I also attached a patch for convenience.
Cheers,
Tom
--- /usr/lib/usrmerge/convert-usrmerge.orig 2018-12-07 22:2
Package: cloud.debian.org
Version: ami-06885bf4009501fc0 (aka debian-12-amd64-20230723-1450)
I created an EC2 instance in us-east-1 using the command line below. The
instance does not have a public IP, although I requested one. It is not
possible to add a public IP after creation time, except for
close 1040841
thanks
Hi Axel
On 7/17/23 13:58, Axel Kittenberger wrote:
> I'm very sorry, I overlooked that on this machine "which texstudio"
> resulted in "/usr/local/bin/texstudio".
Thanks for clearing up the issue, I'm glad it works for you now.
Regards
Tom
Changing the encryption setting from blowfish to aes allowed the tunnel
to start. This can probably be downgraded from important. Thanks.
On Sat, 15 Jul 2023 14:33:04 +
"Debian Bug Tracking System" wrote:
> Thank you for filing a new Bug report with Debian.
>
> You can follow progress on
config is still supported.
Thanks for maintaining this.
--Tom Noonan II
-- System Information:
Debian Release: 12.0
APT prefers stable-security
APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.1.0-10-amd64 (SMP w/2 CPU threads
erminal tab is there as
well. Sorry, I can't reproduce this.
You say the tab is not visible when you start TeXstudio? And you don't
see the config options if you enable advanced options?
Kind regards
Tom
[1]:
https://tracker.debian.org/news/1267252/accepted-texstudio-304ds-2-source-into-unstable/
Thank you, there is no rush! Please let me know if there is anything I can do
to make this easier on my side.
On Sun, 4 Jun 2023, at 10:26 AM, matthias.geiger1...@tutanota.de wrote:
> Hi Tom,
>
> I have prepared the packaging so far. I didn't have time yet to upload it
> b
Is there anything I can do as the maintainer to help move this forward?
My apologies!
I had missed the fact that noauto appears to be required. If it is
included, --architectures, etc. are accepted.
Sincerely,
--
t...@sullivaninusa.com
FAX: 815-301-2835
Package: live-build
Version: 1:20210407
Severity: normal
X-Debbugs-Cc: t...@sullivaninusa.com
Dear Maintainer,
as root or using sudo:
#config appears to work fine.
#config -a i386 OR #config --architecture/architectures i386 gives error:
--a not found OR --architecture OR architectures not foun
Package: release-notes
Severity: normal
Tags: upstream
X-Debbugs-Cc: tom...@gmail.com
Dear Maintainer,
With the transition to FFmpeg 5.0, the current stable version line of VLC
(3.0.x) dropped VA-API hardware decoding support due to important changes on
the FFmpeg API, which will mainly impact
D=cbc12706-9f45-452f-9d0d-4cfef99e8042
D: Searching subvolume for system at path: /
D: Found subvolume: @, on device:
D: Found subvolume: @home, on device:
D: Found subvolume: @snapshots, on device:
D: Users: tom root
D: Encrypted home users:
D: Encrypted home dirs:
D: Encrypted private dirs
he Problem with 22H2 i upgraded samba today to your provided packages
on bullseye.
So far all seems to work - quick tests with 7/10/11/2016
thanks for your work!
Tom
Package: mosquitto
Version: 2.0.11-1.1+b3
The libwebsockets-dev package in Bookworm is compiled without
"LWS_WITH_EXTERNAL_POLL=ON". This breaks compatibility with mosquitto,
which requires this option to be set in libwebsockets 4.1.6 to use
websockets.
Mosquitto is statically linked against
Package: kwin-x11
Version: 4:5.26.0-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation? recent update
* What exactly did you do (or not do) that was effective (or
ineffective)?
plasma did
Package: android-sdk-platform-tools
Version: 28.0.2+7
I am an Android developer and turns out that with current version of
android-sdk-platform-tools [from March
2019](https://developer.android.com/studio/releases/platform-tools.html#2802_march_2019)
I get errors trying to use CalyxOS installer
On Tue, 6 Sep 2022 15:55:39 +0200 Valentin Kleibel wrote:
found 1017944 grub2/2.06-3~deb11u1
severity 1017944 serious
tags 1017944 patch
Dear Maintainers,
We can confirm that this bug affects all pv and pvh domUs that use
pvgrub.
The commit responsible is 20239c28 "Bump debhelper from old 10 t
I also got a segfault on upgrading to emacs 28.1. I fixed it by installing the
emacs-el package -- which is
recommended, but I default install all packages without recommends. Apparently
this has something to do with
native compilation, which requires the el source files:
https://github.com/ke
Source: music
Version: 3.36.7
Severity: important
X-Debbugs-Cc: foren...@milwpc.com
I opened the program, and expected to be able
to add music files to build playlists.
I couldn't find a way to do it. I later
discovered it is not possible.
Maybe some means to add music files could
be added to
libseccomp-dev [!alpha !m68k !sh4 !sparc64] should allow the
build to succeed there.
Merci!
Tom
[1]: https://manpages.debian.org/unstable/dpkg-dev/dpkg-gensymbols.1.en.html
rules.diff
Description: Binary data
symbols.diff
Description: Binary data
liblxc1.symbols.sparc64
Description: Binary data
"/etc/init.d/rpcbind" runs 'ln -sf "$PIDFILE"
/run/sendsigs.omit.d/rpcbind', so it shouldn't stop in runlevel 1.
The problem's that "/etc/init.d/rpcbind" also has "Default-Stop: 0 1
6", which overrides the "sendsigs.omit.d" mechanism. It should have
"Default-Stop: 0 6".
Package: chezmoi
Severity: wishlist
* Package : chezmoi
Version : 2.17.1
Upstream author : Tom Payne
* URL : https://chezmoi.io/
* License : MIT
Programming Lang: Go
Description : cross-platform dotfile manager
chezmoi is the most popular dotfile
e' is a Debian codename?
Is it because jessie is not officially supported anymore but only by LTS
Exended?
Warm regards, Tom
title = "capnproto";
is_affected = .depends ~ "libcapnp-0.8.0" | .depends ~ "libcapnp-0.9.1";
is_good = .depends ~ "libcapnp-0.9.1";
is_bad = .depends ~ "libcapnp-0.8.0";
--
*Tom Lee */ http://tomlee.co / @tglee <http://twitter.com/tglee>
nvoke the *update-serialization* cmake target before building shared
libraries (either right before the build step or via the cmake foo in my
patch)
You can skip the TILEDB_UPDATE_SERIALIZATION stuff if it's getting in the
way.
Cheers,
Tom
On Fri, Feb 25, 2022 at 1:14 PM Tom Lee wrote:
>
ch and
the full build log and I'll take a look.
Cheers,
Tom
On Fri, Feb 25, 2022 at 5:17 AM Dirk Eddelbuettel wrote:
>
> Tom,
>
> Sad news. The build fails for me in unstable as is (using an updated
> pbuilder chroot). I log these to file and what I see is
>
> cd
work around the issue:
https://github.com/MirServer/mir/pull/2267. I've attached a patch
incorporating the upstream fix but it should be trivial to apply it
manually if you prefer.
--
*Tom Lee */ http://tomlee.co / @tglee <http://twitter.com/tglee>
mir-capnp-0.9.1.patch
Description: Binary data
both 0.8.0 and 0.9.1 for the upcoming
transition.
--
*Tom Lee */ http://tomlee.co / @tglee <http://twitter.com/tglee>
tiledb-capnp-0.9.1.patch
Description: Binary data
ant
> > Tags: bookworm sid
> > User: pkg-openssl-de...@lists.alioth.debian.org
> > Usertags: ftbfs-3.0
> >
> > Your package is failing to build using OpenSSL 3.0 with the
> > following error:
>
> Tom, I don't know if you've had a chance to look a
"soon" but it's hard to give an exact
timeline at this point. Bear with me if you can but go ahead and upload to
experimental for now if you're blocked.
Cheers,
Tom
On Fri, Feb 11, 2022 at 2:00 AM meskio wrote:
> Hello Tom,
>
> I'm the maintainer of the lam
If I'm reading right I *think* it's more likely to be just an
oversight/bug. Atomic operations are basically intrinsics on some
architectures (most notably x86) so no need to link another library. Other
architectures need a little more of a lift. I'll have a patch we can try
so
np.so: undefined reference to
> `__atomic_store_8'
> > collect2: error: ld returned 1 exit status
> > make[2]: *** [Makefile:2111: capnpc-c++] Error 1
>
> Cheers,
> tony
>
> [1]
> https://buildd.debian.org/status/fetch.php?pkg=capnproto&arch=armel&ver=0.9.1-1&stamp=1644104535&file=log
>
--
*Tom Lee */ http://tomlee.co / @tglee <http://twitter.com/tglee>
ou put into these reviews!
>
> Regards,
> tony
>
--
*Tom Lee */ http://tomlee.co / @tglee <http://twitter.com/tglee>
Hi Adrian,
> This looks more like an issue with your bootloader. I haven't used SILO for a
> long time, so I don't have a track what currently works and what not.
Thanks for pointing that out! I was searching in the wrong direction...
> Can you try booting the current ISO snapshot image?
Yes, t
Package: src:linux
Version: 5.14.6-2
Severity: important
X-Debbugs-Cc: debian-sp...@lists.debian.org
Dear Maintainer,
Debian kernels > 5.14.3-1~exp1 consistently fail to boot on SPARC T4-1:
SPARC T4-1, No Keyboard
Copyright (c) 1998, 2014, Oracle and/or its affiliates. All rights reserved.
OpenB
Package: os-prober
Version: 1.79
Severity: normal
X-Debbugs-Cc: tom@quantentunnel.de
Dear Maintainer,
I tried to use a text-based syslog (rsyslogd) exclusivly.
The start-script for journald was "masked" in systemd speak.
Can not remember os-prober's exact error message (s
ersion
of debsums) if:
- the name contains spaces and
- the last portion after a space contains digits and a-f
- there is no md5sum (which probably should not happen)
Cheers
Tom
Package: debsums
Version: 3.0.2
Severity: normal
Dear Maintainer,
I get a false positive in debsums on a file with a space in the filename:
# debsums -a homegear-zigbee | grep bbaa
debsums: missing file /etc/homegear/devices/26/bbaaPlug (from homegear-zigbee
package)
# grep bbaa /var/lib/dpkg/i
That's great news! Thank you Seunghun for acting on it so promptly. Cheers.
Is anyone looking into this? I sense increasing demand for swtpm +
qemu for Win 11 VM.
Package: tripwire
Version: 2.4.3.7-3+b3
Severity: normal
Dear Maintainer,
I've installed tripwire, opting out of key creation during installation,
and am creating my keys with twadmin. When I run twadmin, and provide a
64-character passphrase, it prints the request for verification, but
immediat
;
something short like:
$ apt reinstall --conf
Thanks!
-Tom Wizetek
Hi,
Any updates on this? debsecan has been misreporting the apt CVE on all
of my buster machines for at least a month now.
Tom
Package: gimp
Version: 2.10.8-2
Severity: normal
I was using the filters > map > "fractal trace",
adjusting the depth parameter, and a dialog appeared.
"Press 'copy to clipboard'. Then press 'report bug'." I did
that, and a web page opened that was an instruction for
using reportbug.
So, the p
Package: bless
Version: 0.6.0-5.1
Severity: important
I opened a file in bless, from Nautilus file
manager.
I just wanted to view it to find out if I needed
it for anything. A message said, file on disk
has changed, with two buttons:
ignore
reload
and a warning, "reload is the only safe option"
On Mon, Dec 21, 2020 at 8:11 AM Thorsten Glaser wrote:
> On Mon, 21 Dec 2020, Tom H wrote:
>>> It means “do not call this init script in any runlevel”,
>>> which *ought* to be very obvious.
>>
>> "do not call this init script in any runlevel" can b
On Mon, Dec 21, 2020 at 12:16 AM Ian Jackson
wrote:
> Thorsten Glaser writes ("Bug#975591: update-rc.d disable"):
>> On Sun, 20 Dec 2020, Tom H wrote:
>>>
>>> It depends what's meant by "disable".
>>
>> Which part of “disable an ini
On Sun, Dec 20, 2020 at 11:44 PM Thorsten Glaser
wrote:
> On Sun, 20 Dec 2020, Tom H wrote:
>>> There *absolutely* HAS to be some way to disable an init script
>
>> It depends what's meant by "disable".
>
> Which part of “disable an init script”
>> The only way supported in update-rc.d to disable a service is
>> update-rc.d disable
>
> … but not this.
>
> “update-rc.d disable” does *NOT* disable a service. Instead, it
> sets it to “stopped in all runlevels”, which is evidently *not*
> the same.
>
> I don’t care if “update-rc.d disable” get
Package: dselect
Version: 1.19.7
Severity: important
"libgnutls-dane0 depends on libgnutls30 (3.6.7-4+deb10u5)"
breaks update using dselect.
-- Package-specific info:
System tainted due to merged-usr-via-symlinks.
-- System Information:
Debian Release: 10.6
APT prefers stable-updates
APT pol
Should the hold-up to upgrading to nfs-utils v2.x be the migration to
"/etc/nfs.conf", Fedora has a python conversion script
https://src.fedoraproject.org/rpms/nfs-utils/raw/master/f/nfsconvert.py
#!/usr/bin/env python3
"""
Read in the deprecated /etc/sysconfig/nfs file and
set the corresponding
hunderbird).
But of course, I've tested under sid as well (a fresh install in a new
VM before I opened the bug) with the same result.
I'm happy to help testing or provide more info.
Regards
Tom
n)
and webext-tbsync (2.18-2) are installed and show up in TB's add-ons
section as enabled.
I would be great to have working set of tbsync packages in Debian again.
Kind regards
Tom
Package: gimp
Version: 2.10.8-2
Severity: minor
I opened the print dialog, and the upper tabs
had no labels. Only the one that is selected.
So, I have to select each one to see the label,
until I find the one I want.
-- System Information:
Debian Release: 10.6
APT prefers stable-updates
AP
Same issue on this laptop: ASUS Vivobook S S413FQ-EB029T
This is a blocking issue as Debian Buster can't be installed without a
RJ45-USB adapter.
Tom LAREDO
Package: wnpp
Severity: wishlist
Owner: Tom Yang
X-Debbugs-Cc: debian-de...@lists.debian.org, wyh.aa...@gmail.com
* Package name: trojan-go
Version : 0.8.2
* URL : https://github.com/p4gefau1t/trojan-go
* License : GPLv3
Programming Lang: Go
Description
Package: gnome-control-center
Version: 1:3.30.3-2~deb10u1
Severity: important
Gnome-conrol-center > devices > displays > external monitor set
to primary in 'join displays'> 'single display'
turns off both LVDS and external monitor, freezes keyboard and
mouse control, hard reboot only solution.
I
Package: obs-studio
Version: 25.0.8
Severity: wishlist
Currently obs-studio is built with caption support disabled as that used to
fail to compile on linux but that was now fixed in OBS a while ago
https://github.com/obsproject/obs-studio/pull/2099 and works without
problems now.
It would be grea
Package: systemsettings
Version: 4:5.14.5-1.1
Severity: normal
Dear Maintainer,
I ran systemsettings5 > hardware > display and monitors; and
the righthand pane: "configure monitors and displays"
is empty except for the blue dot with an 'i', which
does nothing.
Below are the messages/errors:
re
Since it's the absence of hostnamectl/hostnamed when not using systemd
that's the issue, could you ship a "README.sysvrc" requesting that the
following be created?
cat > /etc/NetworkManager/conf.d/hostname.conf <
I know Debian is a volunteer project, but it seems like bad form when a
package-breaking bug is reported on the
same day it is introduced, a trivial fix is availble, and 11 days later the
package is still broken. One
maintainer can trivially fix this, but in the meantime an untold number of
pe
I can confirm that the patch from
https://bugs.launchpad.net/ubuntu/+source/drbd-utils/+bug/1866458
against drbd-utils 9.5.0-1 works and fixes the issue for me.
Like Denis I'm on Proxmox PVE 6 (buster based) with linux 5.4.44-2
This problem hit me too.
Tom
Description: netlink
It's misnamed but "RPCNFSDCOUNT" in "/etc/default/nfs-kernel-server"
can be used.
It might not be worth creating a more appropriate, separate variable
given that, when Debian upgrades to v2.x (first released, as 2.1.1,
three and a half years ago), options'll be set via "/etc/nfs.conf".
I don't use connman, but I was intrigued by this bug, so I replaced
ifupdown in a VM with connman.
1) connman is taking over the resolv.conf symlink because it provides
an inbuilt dns caching server and assumes that the user wants to use
it by default.
2) The package could ship "/etc/default/conn
Package: isc-dhcp-server
Version: 4.3.5-3+deb9u1
When you run dhcp-lease-list without an OUI file installed, it complains
and provides a web link to download one. This web link is out of date and
results in a 404 error. Correction follows:
/usr/sbin/dhcp-lease-list
Line 33
-my $OUI_URL = 'http:
he Postgres mailing list discussion about this at
https://www.postgresql.org/message-id/flat/20200606222017.GA2564110%40rfd.leadboat.com
regards, tom lane
Package: openjpeg2
Version: 2.3.0-2
Severity: normal
Tags: patch
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu groovy ubuntu-patch
Dear Maintainer,
The openjpeg2 dev package is missing the static library.
In Ubuntu, the attached patch was applied to achieve the following:
* Add
Package: vlc-bin-dbgsym
Version: 3.0.8-0+deb10u1
Severity: normal
Dear Maintainer,
Stable (Buster) dbgsym packages for vlc and libraries are version 3.0.8, but
the binaries are now 3.0.10 since April 28, 2020.
e.g.
The following packages have unmet dependencies:
vlc-bin-dbgsym : Depends: vlc-bi
/status/logs.php?pkg=qemu&arch=sparc64
Instead of enabling seccomp on linux-any, maybe it could be enabled on
something like this:
[!alpha !ia64 !m68k !sh4 !sparc64 !hurd-any !kfreebsd-any]
Thanks,
Tom
I fixed this when I upgraded to Debian 10, Buster.
From: Tom Bryant
Sent: Wednesday, April 8, 2020 10:14 AM
To: Debian Bug Tracking System
Subject: Bug#956217: apache2: Does not run server side CGI scipts and
start/stop broken
Package: apache2
Version: 2.4.10
Package: apache2
Version: 2.4.10-10+deb8u16
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the out
1 - 100 of 1928 matches
Mail list logo
