Package: pbbuttonsd Version: 0.7.2-1 Severity: normal
pbbuttonsd starts at boot with the usual message and doesn't give any errors. After that the buttons for brightness, volume and eject CD don't work. But when I do an "/etc/init.d/pbbuttonsd restart" afterwards a very similar message is shown and they work correctly. The same problem occured with version 0.7.1 of pbbuttonsd which is in "testing" and it is independent of the power source (battery/AC). When on battery the screen sometimes dims right after boot and doesn't get brighter when I use the trackpad or keyboard (until I restart pbbuttonsd and adjust it manually) which seems to indicate that pbbuttonsd does start somehow. I didn't touch any config files of pbbuttonsd. The messages are: Restarting pbbuttonsd:pbbuttonsd 0.7.2: iBook/G3 PB Pismo/G4 PB Titanium (PMU version: 12) .. or "Starting pbbuttonsd:pb..." respectively Some info about my hardware: [EMAIL PROTECTED]:~$ cat /proc/pmu/info PMU driver version : 2 PMU firmware version : 0c AC Power : 1 Battery count : 1 [EMAIL PROTECTED]:~$ cat /proc/cpuinfo processor : 0 cpu : 7455, altivec supported clock : 798MHz revision : 0.3 (pvr 8001 0303) bogomips : 804.39 machine : PowerBook6,3 motherboard : PowerBook6,3 MacRISC3 Power Macintosh detected as : 287 (iBook G4) pmac flags : 0000001b L2 cache : 256K unified memory : 256MB pmac-generation : NewWorld -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-powerpc Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages pbbuttonsd depends on: ii hdparm 6.1-2 tune hard disk parameters for high ii libasound2 1.0.9-3 ALSA library ii libc6 2.3.5-6 GNU C Library: Shared libraries an ii lsb-base 3.0-9 Linux Standard Base 3.0 init scrip ii makedev 2.3.1-78 creates device files in /dev Versions of packages pbbuttonsd recommends: ii laptop-mode-tools 1.10-1 Userland scripts to control "lapto -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]