Package: installation-reports INSTALL REPORT
Debian-installer-version: date (of install): march 13 2005; from where you got the image: boootable CD1/1 from "Debian" book by R.Hertzog (bought in France in December 2004). uname -a: 2.6.7-1-386 Date: march 13, 2005 Method: How did you install? from bootable CD What did you boot off? CD If network install, from where? http://ftp2.fr.debian.org/debian/ Proxied? No Machine: Packard Bell imedia 5130 Processor: Pentium 4 (2.93GHz) Memory: 512M Root Device: IDE Name of device: /dev/hda2 Root Size/partition table: (as seen with partman tool during install) IDE1 master (hda) 160GB ST3160023AS partition n°1 primary 50GB ntfs --------- 2 primary 279.7GB bootable ext3 / --------- 5 logical 5GB ext3 /usr --------- 6 logical 3GB ext3 /var --------- 7 logical 1.6GB swap swap --------- 8 logical 403MB ext3 /tmp --------- 9 logical 99.8GB ext3 /home SCSI1 (0,0,0) (sda)-1.1GB GENERIC USB STORAGE-SMC -----------1 (sdb) ------------------------------------------------CFC -----------2 (sdc) ------------------------------------------------MMC -----------3 (sdd) ------------------------------------------------MSC Output of lspci: Everest:~# lspci 0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04) 0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04) 0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60 0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70 0000:02:00.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04) 0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) and lspci -n: Everest:~# lspci -n 0000:00:00.0 0600: 8086:2580 (rev 04) 0000:00:01.0 0604: 8086:2581 (rev 04) 0000:00:1b.0 0403: 8086:2668 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:244e (rev d3) 0000:00:1f.0 0601: 8086:2640 (rev 03) 0000:00:1f.2 0101: 8086:2651 (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:01:00.0 0300: 1002:5b60 0000:01:00.1 0380: 1002:5b70 0000:02:00.0 0703: 163c:3052 (rev 04) 0000:02:05.0 0200: 10ec:8139 (rev 10) 0000:02:07.0 0c00: 104c:8024 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Sound not working, SATA hard disk not recognized as SATA but as IDE Description of the install: Here's the "history" of this install: I first bought the "Official debian CD's" from ikarios in France (14 CDs). I had several problems with these: choosing the 2.6 kernel version my cdrom was not correctly detected (with linux26 and expert26) and I couldn't go ahead. Using linux or expert to install I could not use GRUB as bootloader (installer stopped during GRUB install). So I installed sarge with 2.4.27-1-386 kernel and lilo bootloader. After some work I managed to get my graphic card (ATI Radeon X300 SE) properly working and my DSL connexion as well. Two problems could not be solved: Sound was not working and when shutting down the machine I had to push the on/off switch to really shut down the PC (and in fact it seemed not to be really shut down as I could reboot by hitting any key on my keyboard). I came after this to think (browsing among different help forums, debian archives,...)that: 1) my motherboard sound chipset (Intel High Definition Audio ICH6 controller and Realtek ALC880 chip) would be better recognised under 2.6 kernel (alsa 1.0.8 integrated) 2) the same 2.6 kernel would better work with ACPI and solve my shutdown problem I found that my netinst CD (from the debian book) was able to install 2.6.7 kernel using linux26. This is the new install from which I write down this install report. The install was globally OK and I was happy to see that the shutdown was now clean. I used my DSL connexion to download useful packages (graphical (kde) environment and special packages for the ATI card, also alsa-base and other sound packages in order to get sound working). But my sound problem remains...and I still don't see how to solve it. Any help would be greatly appreciated !!! Alsaconf doesn't seems to recognise my ICH6 audio controller. Unhappily I'm not expert enough to compile my own kernel and use it, and even not knowing if this could solve my sound problem. I'll give more info of my config on demand (I don't know what is usefull) Thak's in advance for any help. F.Baldit.