Package: installation-reports INSTALL REPORT
Debian-installer-version: Oct 6 http://cdimage.debian.org/pub/weekly/i386/ uname -a: Linux bb 2.4.27-2-386 #1 Thu Jan 20 10:55:08 JST 2005 i686 GNU/Linux Date: Oct 8 12:43:19 Method: I downloaded and burnt debian-testing-i386-binary-1.iso. Installation with only this one CD. Machine: self assembled PC. Mainbord K7S5A; 512 MB DDR-Ram; SCSSI-Controller ADAPTEC AHA-2940U/UW/D; one 80GB SCSI: one CR-ROM: IBM CDRM00203 !K Rev: 1.02 two HD: IBM DDRS-34560W Rev: S71D (4GB); IBM DRHS36D Rev: 0270 (18GB) Debia testing ist installed on DDRS-34560W Processor:Athlon 2GB Memory: 512 MB DDR Root Device: <IDE? SCSI? Name of device?> Root Size/partition table: Feel free to paste the full partition table, with notes on which partitions are mounted where. Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0d.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0343 (rev a1) 0000:00:00.0 0600: 1039:0735 (rev 01) 0000:00:01.0 0604: 1039:0001 0000:00:02.0 0601: 1039:0008 0000:00:02.2 0c03: 1039:7001 (rev 07) 0000:00:02.3 0c03: 1039:7001 (rev 07) 0000:00:02.5 0101: 1039:5513 (rev d0) 0000:00:02.7 0401: 1039:7012 (rev a0) 0000:00:0b.0 0200: 10ec:8139 (rev 10) 0000:00:0d.0 0100: 9004:8178 0000:01:00.0 0300: 10de:0343 (rev a1) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] Comments/Problems: Installing with Kernel 2.6 failed. Installing the boot loader stopped with "Suche nach weiteren Betriebssystemen". Installation with kernel 2.4 run without any problem. Up to now I tried only sarge. I probed Debian 'testing' (etch) first time. I do not trust very well the used CD-drive. This drive starts the CD without the (red) Debian logo. May be that this does not work properly, but only kernel 2.6 causes the problems. The installation runs pretty well. I'm used to use fixed IP-adresses. I have to go back to fill in the numbers. Unfortunately sometimes the installation than changes into the expert mode. May be that is one failor of mine. cheers Robert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]