Package: installation-reports Debian-installer-version: 31. oct. 2005 daily build, from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso uname -a: Date: 31.oct.2005 20:00 Method: CD-ROM boot, netinst image
Machine: Mitac 7020 Processor: Pentium 3-700MHz Memory: 256MB+64MB onboard Root Device: Haven't gotten there yet. Root Size/partition table: No partitions changed yet Output of lspci and lspci -n: lspci not included on netinst image Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: PCMCIA network card (ne2k-compatible, usually works fine with pcnet_cs) is not detected. I am asked if I want to use FireWire ethernet. If I pick no, I can select a driver from a list, and upon picking pcnet_cs I am again asked about firewire ethernet. An lsmod from the second terminal shows that pcnet_cs is loaded. dmesg shows no output from the driver, though it does confirm that the PCMCIA controller was detected and enabled (using yenta_socket). The LEDs on the card also light up, as they usually do when a PCMCIA controller driver is loaded. ifconfig -a also does not show any interface besides 'lo'. By the way, the reason I didn't just install with install24 is that that one panics on-boot. I'll post another bug report on that soon. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]