Jens Wilke wrote:
>
Here we are (reloaded vzaphfc with error situation):
>
> For that case I would like to see the output of:
> ztcfg -vv
Zaptel Configuration
==
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves:
On Wednesday 06 September 2006 21:18, Cybaer wrote:
> Most of the time (the above I managed only once) I get the following
> effect after reloading the module and starting up asterisk in console mode:
>
> [chan_zap.so] => (Zapata Telephony w/PRI)
> == Parsing '/etc/asterisk/zapata.conf': Found
>
uuuh, now I get some problems...
Jens Wilke wrote:
> Please try:
> # pri debug span 1
> and provide the output.
>
you mean: startup asterisk (e. g. asterisk -vvc), startup pri debug
span 1 and dial? Then I got the same as before:
*CLI> -- Executing SetCallerID("SIP/myid-081baf58", "msn"
Please try:
# pri debug span 1
and provide the output.
Alternatively try to load the module with:
modprobe vzaphfc force_l1_up=1
When starting asterisk you should see:
== Primary D-Channel on span 1 up
and maybe:
== Restart on requested on entire span 1
If this is not appearing d-channel layer 2
On Mon, 2006-09-04 at 23:22 +0200, Thomas Renard wrote:
[...]
> I am not able to initiate a call into an ISDN line from an asterisk
> phone using (v)zaphfc. It is possible to initiate a call from ISDN
> into asterisk without any problems. (of course) it worked with
> zaptel-versions < 1.2.7.
I e
Package: zaptel-source
Version: 1:1.2.8.dfsg-1
Severity: normal
I am not able to initiate a call into an ISDN line from an asterisk
phone using (v)zaphfc. It is possible to initiate a call from ISDN
into asterisk without any problems. (of course) it worked with
zaptel-versions < 1.2.7.
Problem
6 matches
Mail list logo
