Package: linux-image-2.6.21-2-686 Version: 2.6.21-5 Severity: important After upgrading to linux-image-2.6.21-2-686 I cant compile drivers with closed source parts, in my case a fax driver for a old AVM ISDN pci card, because the kernel does not accecpt non GPL drivers. I get the following error message:
make[2]: Entering directory `/usr/src/linux-headers-2.6.21-2-686' Building modules, stage 2. MODPOST 1 modules FATAL: modpost: GPL-incompatible module fcpci.ko uses GPL-only symbol 'paravirt_ops' -- Package-specific info: ** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #1 SMP Mon Jun 25 20:53:36 UTC 2007 ** Not tainted ** Kernel log: hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:0a.0: Try the "8139too" driver instead. 8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:0c.0: Try the "8139too" driver instead. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[de014000-de0147ff] Max Packet=[2048] IR/IT contexts=[4/8] SCSI subsystem initialized libata version 2.20 loaded. 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xe000, 00:40:f4:1e:c6:0f, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 eth1: RealTek RTL8139 at 0xe400, 00:30:84:77:ff:f8, IRQ 10 eth1: Identified 8139 chip type 'RTL-8139C' hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/512KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 > hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) ieee1394: Host added: ID:BUS[0-00:1023] GUID[00506256000001d1] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) input: PC Speaker as /class/input/input1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] parport0: Printer, Hewlett-Packard HP LaserJet 5L parport_pc: VIA parallel port: io=0x378, irq=7 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: AGP aperture is 64M @ 0xd8000000 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 1 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: MAC address = 00:d0:d7:01:87:b3 b2c2-flexcop: found the stv0299 at i2c address: 0x68 DVB: registering frontend 0 (ST STV0299 DVB-S)... b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 Real Time Clock Driver v1.12ac ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:07.5 to 64 Adding 1534168k swap on /dev/hda11. Priority:42 extents:1 across:1534168k EXT3 FS on hda1, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal ReiserFS: hdb1: using ordered data mode ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb1: checking transaction log (hdb1) ReiserFS: hdb1: Using r5 hash to sort names ReiserFS: hdb2: found reiserfs format "3.6" with standard journal ReiserFS: hdb2: using ordered data mode ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb2: checking transaction log (hdb2) ReiserFS: hdb2: Using r5 hash to sort names ReiserFS: hdb3: found reiserfs format "3.6" with standard journal ReiserFS: hdb3: using ordered data mode ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb3: checking transaction log (hdb3) ReiserFS: hdb3: Using r5 hash to sort names ReiserFS: hdb5: found reiserfs format "3.6" with standard journal ReiserFS: hdb5: using ordered data mode ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb5: checking transaction log (hdb5) ReiserFS: hdb5: Using r5 hash to sort names eth1: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready capifs: Rev 1.1.2.3 CAPI Subsystem Rev 1.1.2.8 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ** Loaded modules: Module Size Used by tcp_diag 1760 0 inet_diag 11336 1 tcp_diag nfs 222444 0 nfsd 202800 17 exportfs 5472 1 nfsd lockd 58248 3 nfs,nfsd nfs_acl 3520 2 nfs,nfsd sunrpc 154972 13 nfs,nfsd,lockd,nfs_acl ppdev 8580 0 lp 10884 0 capi 16672 4 kernelcapi 37908 1 capi capifs 5640 2 capi ipv6 236256 25 reiserfs 220224 4 dm_snapshot 16420 0 dm_mirror 20116 0 dm_mod 52556 2 dm_snapshot,dm_mirror ide_generic 1344 0 [permanent] snd_via82xx 26904 7 gameport 14984 1 snd_via82xx snd_ac97_codec 92356 1 snd_via82xx ac97_bus 2272 1 snd_ac97_codec snd_pcm_oss 39168 0 snd_mixer_oss 15328 1 snd_pcm_oss snd_pcm 71940 6 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_page_alloc 9512 2 snd_via82xx,snd_pcm snd_mpu401_uart 8032 1 snd_via82xx snd_seq_dummy 3748 0 snd_seq_oss 29248 0 tsdev 7520 0 snd_seq_midi 8160 0 snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi snd_seq 46160 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event rtc 12760 0 snd_timer 20868 5 snd_pcm,snd_seq snd_rawmidi 22400 2 snd_mpu401_uart,snd_seq_midi snd_seq_device 7596 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd 48132 19 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device stv0299 9672 1 soundcore 7424 1 snd psmouse 34952 0 b2c2_flexcop_pci 8344 0 b2c2_flexcop 25516 1 b2c2_flexcop_pci serio_raw 6564 0 dvb_core 73640 2 stv0299,b2c2_flexcop via686a 15304 0 firmware_class 9408 1 b2c2_flexcop via_agp 10016 1 agpgart 32168 1 via_agp dvb_pll 14084 1 b2c2_flexcop evdev 9216 1 i2c_isa 5216 1 via686a i2c_viapro 8660 0 i2c_core 20480 6 stv0299,b2c2_flexcop,via686a,dvb_pll,i2c_isa,i2c_viapro parport_pc 32740 1 parport 33672 3 ppdev,lp,parport_pc shpchp 30996 0 pci_hotplug 29088 1 shpchp pcspkr 3136 0 eth1394 18276 0 ext3 120904 1 jbd 55208 1 ext3 mbcache 8164 1 ext3 ide_cd 36512 0 cdrom 32768 1 ide_cd ide_disk 15648 8 ata_generic 8100 0 8139too 25536 0 libata 109172 1 ata_generic scsi_mod 133740 1 libata floppy 54820 0 via82cxxx 8676 0 [permanent] ohci1394 32432 0 8139cp 22336 0 mii 5280 2 8139too,8139cp ieee1394 89560 2 eth1394,ohci1394 generic 4804 0 [permanent] ide_core 115016 5 ide_generic,ide_cd,ide_disk,via82cxxx,generic uhci_hcd 22608 0 usbcore 123272 2 uhci_hcd thermal 14120 0 processor 30888 1 thermal fan 4868 0 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: d0000000-d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge [1106:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c000 [size=16] Capabilities: <access denied> 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> 00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> 00:07.4 Host bridge [0600]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 11 Capabilities: <access denied> 00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 50) Subsystem: Micro-Star International Co., Ltd. MS-6330 Onboard Audio [1462:3300] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 11 Region 0: I/O ports at cc00 [size=256] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at d400 [size=4] Capabilities: <access denied> 00:08.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 01) Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 10 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at dc00 [size=32] 00:09.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020] (prog-if 10 [OHCI]) Subsystem: Texas Instruments Unknown device [104c:8010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at de014000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at de010000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:0a.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e000 [size=256] Region 1: Memory at de015000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Allied Telesyn International AT-2500TX/ACPI [1259:2503] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e400 [size=256] Region 1: Memory at de016000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00:0d.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] [1244:0a00] (rev 02) Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN Controller [1244:0a00] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 5 Region 0: Memory at de017000 (32-bit, non-prefetchable) [size=32] Region 1: I/O ports at e800 [size=32] 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) (prog-if 00 [VGA]) Subsystem: Guillemot Corporation Unknown device [14af:710a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] [virtual] Expansion ROM at dd000000 [disabled] [size=64K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-2-686 depends on: ii initramfs-tools [linux-initr 0.89 tools for generating an initramfs ii module-init-tools 3.3-pre11-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-2-686 recommends: pn libc6-i686 <none> (no description available) -- debconf information: linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686: linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686: linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/kimage-is-a-directory: linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686: linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]