Hi Jeremy,
the following modules are loaded during boot and also show up in lsmod:
i2o_core
This is always needed to access your I2O hardware. It is the main
module, which provides low level access to the I2O hardware. [I2O FAQ]
i2o_block
This is the disk driver, which let you access your RAI
On Wed, Sep 05, 2007 at 03:00:50PM +0200, Arne Metzger wrote:
> So: the d-i recognizes my RAID-Array as /dev/sda. After Reboot, i2o_core
> and i2o_block are loaded, and from that moment /dev/sda is known as
> /dev/i2o/hda.
If your server is still "experimental", it would be quite helpful if you
Wont be a problem - but please tell me how i should do that...
Until now i only have used ready-build netinstall-cd-images.
What do i have to do?
I will have to use i386-version...
Jérémy Bobbio schrieb am 05.09.2007 16:01 Uhr:
On Wed, Sep 05, 2007 at 03:00:50PM +0200, Arne Metzger wrote:
So
On Wed, Sep 05, 2007 at 08:03:39PM +0200, [EMAIL PROTECTED] wrote:
> Wont be a problem - but please tell me how i should do that...
> Until now i only have used ready-build netinstall-cd-images.
>
> What do i have to do?
> I will have to use i386-version...
Just boot on the mini.iso [1] after bur
Jérémy Bobbio schrieb am 05.09.2007 22:50 Uhr:
Just boot on the mini.iso [1] after burning it. It will download all
the necessary components of the debian-installer through the network and
proceed the installation as you would expect.
[1] http://people.debian.org/~joeyh/d-i/images/20070905-09:0
Any new information about this bug report?
Or ist more information / testing needed?
Regards,
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: debian-installer
Version: 20070308
I recently used d-i to install etch on a FujituSiemens Primergy F200.
That maschine has 6 SCSI-Drives built-in, which i have configured as
RAID5 (no Hotspare) using the Adaptec-BIOS. During POST and installation
the RAID-Array is shown as /dev/sda.
On Thu, Aug 30, 2007 at 12:38:50PM +0200, Arne Metzger wrote:
> I recently used d-i to install etch on a FujituSiemens Primergy F200.
> That maschine has 6 SCSI-Drives built-in, which i have configured as
> RAID5 (no Hotspare) using the Adaptec-BIOS. During POST and installation
> the RAID-Array
I have looked into the problem of using Adaptec 2100S with Debian
Edu/Etch, have have a few observations. The problem seem to originate
from the fact that two different kernel modules, dpt_i2o and
i2o_block/i2o_core support these cards, and that these modules produce
different device nodes /dev/s
[Petter Reinholdtsen]
> A quick look in /lib/modules/2.6.18-5-686/modules.pcimap tell me that
> the conflicting kernel module issue only affect one PCI id. These are
> the devices supported by the two modules:
>
> 1044:a511 dpt_i2o i2o_core
> 1044:a501 dpt_i2o
> 8086:1962 i2o_core
This pro
Petter Reinholdtsen <[EMAIL PROTECTED]> writes:
> [Petter Reinholdtsen]
>> A quick look in /lib/modules/2.6.18-5-686/modules.pcimap tell me that
>> the conflicting kernel module issue only affect one PCI id. These are
>> the devices supported by the two modules:
>>
>> 1044:a511 dpt_i2o i2o_cor
[Otavio Salvador]
> Isn't it 1011:a511?
Nope, it isn't. That surprised me too, as I looked in the
modules.pcimap file. The machine I test on do not have the 1011:a511,
but the 1011:a501 device.
Happy hacking,
--
Petter Reinholdtsen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
Petter Reinholdtsen <[EMAIL PROTECTED]> writes:
> [Otavio Salvador]
>> Isn't it 1011:a511?
>
> Nope, it isn't. That surprised me too, as I looked in the
> modules.pcimap file. The machine I test on do not have the 1011:a511,
> but the 1011:a501 device.
hum ... no idea _why_ it's being loaded th
[Otavio Salvador]
> It was tested using 2.6.22 right?
I tested using the 2.6.18 kernel in etch.
Happy hacking,
--
Petter Reinholdtsen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
14 matches
Mail list logo
