found 444880 2.6.26-5 thanks Bastian, what kernel are you running?
I'm getting "0" (which isn't the expected "read" either) on the following kernel: Linux version 2.6.26-1-686 (Debian 2.6.26-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008 Regards //Johan 2008/10/6 Debian Bug Tracking System <[EMAIL PROTECTED]>: > > This is an automatic notification regarding your Bug report > which was filed against the linux-2.6 package: > > #444880: /boot/vmlinuz-2.6.21-2-686: /proc/20502/wchan has unexpected > content, trivial repro > > It has been closed by Bastian Blank <[EMAIL PROTECTED]>. > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact Bastian Blank <[EMAIL > PROTECTED]> by > replying to this email. > > > -- > 444880: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=444880 > Debian Bug Tracking System > Contact [EMAIL PROTECTED] with problems > > > ---------- Vidarebefordrat meddelande ---------- > From: Bastian Blank <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Date: Mon, 6 Oct 2008 19:16:52 +0200 > Subject: works > Works here flawless. > > Bastian > > -- > There are some things worth dying for. > -- Kirk, "Errand of Mercy", stardate 3201.7 > > > > ---------- Vidarebefordrat meddelande ---------- > From: Johan Walles <[EMAIL PROTECTED]> > To: Debian Bug Tracking System <[EMAIL PROTECTED]> > Date: Mon, 01 Oct 2007 18:16:02 +0200 > Subject: /boot/vmlinuz-2.6.21-2-686: /proc/20502/wchan has unexpected > content, trivial repro > Package: linux-image-2.6.21-2-686 > Version: 2.6.21-6 > Severity: normal > File: /boot/vmlinuz-2.6.21-2-686 > > > Try this: > 1. At one prompt, do "cat". > Now, switch to another prompt and... > 2. Do "pstree -p|grep cat" to find out the PID of your cat command. I > get 20502. > 3. Do "cat /proc/20502/wchan". I get "_stext" here. > 4. Do "strace -p 20502". I get "read(0, <unfinished ...>" here. > > According to "man proc", wchan "is the "channel" in which the process > is waiting. It is the address of a system call". "_stext" doesn't seem > to fit that description. > > I would like the output of cat /proc/20502/wchan to agree with strace. > > Otherwise creating "bottom" (the opposite of "top") can't be done with > just a few lines of shell scripting as I had intended :-(. > > Regards //Johan > > -- Package-specific info: > ** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-6) ([EMAIL PROTECTED]) > (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Wed Jul 11 > 03:53:02 UTC 2007 > > ** Not tainted > > ** Kernel log: > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 20 > e100: eth1: e100_probe: addr 0xe0420000, irq 20, MAC addr 00:02:B3:94:C4:C0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > usb 3-1: new low speed USB device using uhci_hcd and address 2 > usb 3-1: configuration #1 chosen from 1 choice > hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive > usb 3-2: new full speed USB device using uhci_hcd and address 3 > usb 3-2: configuration #1 chosen from 1 choice > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > usb 4-2: new low speed USB device using uhci_hcd and address 2 > usb 4-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input: A4Tech USB Optical Mouse as /class/input/input1 > input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1 > input: Logitech Logitech Extreme 3D Pro as /class/input/input2 > input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D Pro] on > usb-0000:00:1d.2-2 > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44) > Uniform CD-ROM driver Revision: 3.20 > floppy0: no floppy controllers found > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > input: PC Speaker as /class/input/input3 > Real Time Clock Driver v1.12ac > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) > iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x7860) > iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), > using 30 > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > parport0: Printer, Brother HL-2070N series > intel_rng: Firmware space is locked read-only. If you can't or > intel_rng: don't want to disable this in firmware setup, and if > intel_rng: you are certain that your system has a functional > intel_rng: RNG, try using the 'no_fwh_detect' option. > cdc_acm 3-2:1.1: ttyACM0: USB ACM device > cdc_acm 3-2:1.3: ttyACM1: USB ACM device > cdc_acm 3-2:1.5: ttyACM2: USB ACM device > usbcore: registered new interface driver cdc_acm > drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB > modems and ISDN adapters > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > floppy0: no floppy controllers found > EXT3 FS on sda2, internal journal > smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0) > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] > NTFS driver 2.1.28 [Flags: R/W MODULE]. > NTFS volume version 3.1. > e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex > PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, > writing 100006) > PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, > writing 100006) > PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, > writing 100006) > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. > PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, > writing 100006) > PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, > writing 100006) > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. > ip_tables: (C) 2000-2006 Netfilter Core Team > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (8192 buckets, 65536 max) > input: Power Button (FF) as /class/input/input4 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input5 > ACPI: Power Button (CM) [PBTN] > lp0: using parport0 (interrupt-driven). > ppdev: user-space parallel port driver > ata1.00: configured for UDMA/100 > ata1: EH complete > SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: disabled, read cache: enabled, doesn't support > DPO or FUA > ISO 9660 Extensions: Microsoft Joliet Level 1 > ISOFS: changing to secondary root > atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). > atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. > atkbd.c: Unknown key released (translated set 2, code 0x88 on isa0060/serio0). > atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. > usb 3-2: USB disconnect, address 3 > usb 3-2: new full speed USB device using uhci_hcd and address 4 > usb 3-2: configuration #1 chosen from 1 choice > cdc_acm 3-2:1.1: ttyACM0: USB ACM device > cdc_acm 3-2:1.3: ttyACM1: USB ACM device > cdc_acm 3-2:1.5: ttyACM2: USB ACM device > > ** Loaded modules: > Module Size Used by > isofs 32796 1 > ppdev 8580 0 > lp 10884 0 > button 7952 0 > ac 5220 0 > battery 10020 0 > acpi_cpufreq 8680 0 > cpufreq_userspace 4128 0 > cpufreq_stats 5120 0 > cpufreq_powersave 1792 0 > cpufreq_ondemand 7884 2 > freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand > cpufreq_conservative 6888 0 > ipt_MASQUERADE 3616 1 > xt_tcpudp 3104 23 > iptable_nat 7236 1 > nf_nat 17740 2 ipt_MASQUERADE,iptable_nat > xt_state 2432 1 > ipt_LOG 6144 4 > nf_conntrack_ftp 9632 0 > nf_conntrack_ipv4 17612 3 iptable_nat > nf_conntrack 58472 6 > ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conntrack_ftp,nf_conntrack_ipv4 > nfnetlink 6456 3 nf_nat,nf_conntrack_ipv4,nf_conntrack > iptable_filter 2944 1 > ip_tables 12164 2 iptable_nat,iptable_filter > x_tables 14468 6 > ipt_MASQUERADE,xt_tcpudp,iptable_nat,xt_state,ipt_LOG,ip_tables > nls_iso8859_1 4128 2 > ntfs 203264 1 > dm_snapshot 16420 0 > dm_mirror 20116 0 > dm_mod 52556 2 dm_snapshot,dm_mirror > smsc47b397 6020 0 > i2c_isa 5216 1 smsc47b397 > i2c_core 20480 2 smsc47b397,i2c_isa > snd_hda_intel 20312 2 > snd_hda_codec 198336 1 snd_hda_intel > snd_pcm_oss 39168 1 > snd_pcm 71940 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss > snd_mixer_oss 15328 1 snd_pcm_oss > snd_seq_dummy 3748 0 > snd_seq_oss 29248 0 > snd_seq_midi 8160 0 > snd_rawmidi 22400 1 snd_seq_midi > snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi > snd_seq 46160 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 20868 2 snd_pcm,snd_seq > snd_seq_device 7596 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > snd 48132 16 > snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > psmouse 34952 0 > parport_pc 32740 1 > cdc_acm 14080 0 > joydev 9152 0 > evdev 9216 3 > soundcore 7424 2 snd > iTCO_wdt 9956 0 > serio_raw 6564 0 > parport 33672 3 ppdev,lp,parport_pc > tsdev 7520 0 > snd_page_alloc 9512 2 snd_hda_intel,snd_pcm > rtc 12760 0 > pcspkr 3136 0 > ext3 120904 1 > jbd 55208 1 ext3 > mbcache 8164 1 ext3 > ide_cd 36512 1 > cdrom 32768 1 ide_cd > usbhid 23488 0 > hid 23680 1 usbhid > piix 9508 0 [permanent] > generic 4804 0 [permanent] > ide_core 115016 3 ide_cd,piix,generic > e100 32488 0 > mii 5280 1 e100 > uhci_hcd 22608 0 > ata_generic 8100 0 > ehci_hcd 30796 0 > usbcore 123272 5 cdc_acm,usbhid,uhci_hcd,ehci_hcd > tg3 99844 0 > thermal 14120 0 > processor 30888 2 acpi_cpufreq,thermal > fan 4868 0 > sd_mod 19904 3 > ahci 20068 2 > libata 109172 2 ata_generic,ahci > scsi_mod 133740 2 sd_mod,libata > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 955X Express Memory Controller > Hub [8086:2774] > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: <access denied> > > 00:01.0 PCI bridge [0604]: Intel Corporation 955X Express PCI Express Root > Port [8086:2775] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Memory behind bridge: e1000000-e31fffff > Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller [8086:27d8] (rev 01) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI > Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=28, subordinate=28, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI > Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 > Memory behind bridge: e0500000-e07fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 19 > Region 4: I/O ports at 2000 [size=32] > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 20 > Region 4: I/O ports at 2020 [size=32] > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 21 > Region 4: I/O ports at 2040 [size=32] > > 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 22 > Region 4: I/O ports at 2060 [size=32] > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] > (rev e1) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 > I/O behind bridge: 00001000-00001fff > Memory behind bridge: e0200000-e04fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge [8086:27b8] (rev 01) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: <access denied> > > 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE > Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 20a0 [size=16] > > 00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) > Serial ATA Storage Controller AHCI [8086:27c1] (rev 01) (prog-if 01 [AHCI > 1.0]) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 219 > Region 0: I/O ports at 20d0 [size=8] > Region 1: I/O ports at 20e8 [size=4] > Region 2: I/O ports at 20d8 [size=8] > Region 3: I/O ports at 20ec [size=4] > Region 4: I/O ports at 20b0 [size=16] > Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > > 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS > 285] [10de:0165] (rev a1) (prog-if 00 [VGA]) > Subsystem: nVidia Corporation Unknown device [10de:029d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M] > [virtual] Expansion ROM at e0000000 [disabled] [size=128K] > Capabilities: <access denied> > > 05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro > 100] [8086:1229] (rev 0d) > Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter > [8086:1050] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 1000 [size=64] > Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K] > Capabilities: <access denied> > > 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 > Gigabit Ethernet PCI Express [14e4:1600] (rev 01) > Subsystem: Hewlett-Packard Company Unknown device [103c:3013] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 218 > Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > > > > -- System Information: > Debian Release: lenny/sid > APT prefers testing > APT policy: (990, 'testing') > Architecture: i386 (i686) > > Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores) > Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/bash > > Versions of packages linux-image-2.6.21-2-686 depends on: > ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs > ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel > mo > > Versions of packages linux-image-2.6.21-2-686 recommends: > ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries > [i > > -- debconf information: > linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk: > linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686: > linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false > linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686: > linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/kimage-is-a-directory: > linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true > shared/kernel-image/really-run-bootloader: true > linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: > true > linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686: > linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false > linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686: > > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]