Package: linux-image-2.6.22-2-686 Version: 2.6.22-4 Severity: normal
When my system boots, it first says twice that the write cache for sda is enabled. Then it says once that it is disabled. What I'd like to get out of this bug report is to know if that last message is correct, and if so, why my write cache is disabled. [EMAIL PROTECTED]:/var/log$ dmesg|grep -B1 sda] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk -- ata1: EH complete sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [EMAIL PROTECTED]:/var/log$ Nothing else seems to be happening around that time: [EMAIL PROTECTED]:/var/log$ grep -h " 20:30" *|sort|uniq|tail -n 30 grep: acpid: Åtkomst nekas grep: acpid.1.gz: Åtkomst nekas grep: acpid.2.gz: Åtkomst nekas grep: acpid.3.gz: Åtkomst nekas grep: acpid.4.gz: Åtkomst nekas grep: auth.log~: Åtkomst nekas grep: preload.log: Åtkomst nekas grep: preload.log.1.gz: Åtkomst nekas grep: preload.log.2.gz: Åtkomst nekas grep: preload.log.3.gz: Åtkomst nekas grep: preload.log.4.gz: Åtkomst nekas Nov 27 20:30:15 foo kernel: lp0: using parport0 (interrupt-driven). Nov 27 20:30:15 foo kernel: ppdev: user-space parallel port driver Nov 27 20:30:19 foo ntpd[3532]: kernel time sync status change 0001 Nov 27 20:30:19 foo ntpd[3532]: synchronized to 81.216.247.88, stratum 1 Nov 27 20:30:19 foo ntpd[3532]: time reset +0.363076 s Nov 27 20:30:19 foo sensord: Adapter: ISA adapter Nov 27 20:30:19 foo sensord: Chip: smsc47b397-isa-0480 Nov 27 20:30:19 foo sensord: fan1: 1455.00 Nov 27 20:30:19 foo sensord: fan2: 82.00 Nov 27 20:30:19 foo sensord: fan3: 82.00 Nov 27 20:30:19 foo sensord: fan4: 1304.00 Nov 27 20:30:19 foo sensord: sensord started Nov 27 20:30:19 foo sensord: temp1: 37.00 Nov 27 20:30:19 foo sensord: temp2: 25.00 Nov 27 20:30:19 foo sensord: temp3: 25.00 Nov 27 20:30:19 foo sensord: temp4: 0.00 Nov 27 20:30:19 foo sshd[3690]: Server listening on 0.0.0.0 port 22. Nov 27 20:30:20 foo /usr/sbin/cron[3753]: (CRON) INFO (pidfile fd = 3) Nov 27 20:30:20 foo /usr/sbin/cron[3754]: (CRON) INFO (Running @reboot jobs) Nov 27 20:30:20 foo /usr/sbin/cron[3754]: (CRON) STARTUP (fork ok) Nov 27 20:30:22 foo kernel: ata1.00: configured for UDMA/100 Nov 27 20:30:22 foo kernel: ata1: EH complete Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Nov 27 20:30:22 foo kernel: sd 0:0:0:0: [sda] Write Protect is off Nov 27 20:30:37 foo gdm[3617]: pam_unix(gdm:session): session opened for user johan by (uid=0) Nov 27 20:30:49 foo hald: mounted /dev/hda on behalf of uid 1000 Nov 27 20:30:49 foo kernel: ISO 9660 Extensions: Microsoft Joliet Level 1 Nov 27 20:30:49 foo kernel: ISOFS: changing to secondary root [EMAIL PROTECTED]:/var/log$ grep -ir reboot /etc/cron* grep: /etc/cron.allow: Åtkomst nekas /etc/cron.d/logcheck:# @reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck -R; fi /etc/cron.d/logcheck~:@reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck -R; fi /etc/cron.d/logcheck.dpkg-dist:@reboot logcheck if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck -R; fi -- Package-specific info: ** Version: Linux version 2.6.22-2-686 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 ** Not tainted ** Kernel log: PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe0a04000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usb 2-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 20 e100: eth1: e100_probe: addr 0xe0420000, irq 20, MAC addr 00:02:B3:94:C4:C0 ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive usb 2-1: new low speed USB device using uhci_hcd and address 3 hda: selected mode 0x43 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 4 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44) Uniform CD-ROM driver Revision: 3.20 usb 2-2: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: A4Tech USB Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1 input: Logitech Logitech Extreme 3D Pro as /class/input/input2 input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D Pro] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver floppy0: no floppy controllers found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] input: PC Speaker as /class/input/input3 intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if you are certain that your <4>intel_rng: system has a functional RNG, try<4>intel_rng: using the 'no_fwh_detect' option. parport0: Printer, Brother HL-2070N series cdc_acm 2-2:1.1: ttyACM0: USB ACM device cdc_acm 2-2:1.3: ttyACM1: USB ACM device cdc_acm 2-2:1.5: ttyACM2: USB ACM device usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 floppy0: no floppy controllers found EXT3 FS on sda2, internal journal smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006) PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006) PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006) tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PBTN] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ISO 9660 Extensions: Microsoft Joliet Level 1 ISOFS: changing to secondary root ** Loaded modules: Module Size Used by isofs 32828 1 ppdev 8676 0 lp 10980 0 button 7920 0 ac 5188 0 battery 9988 0 acpi_cpufreq 9096 0 cpufreq_userspace 4128 0 cpufreq_stats 5120 0 cpufreq_powersave 1792 0 cpufreq_ondemand 8300 2 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand cpufreq_conservative 6888 0 ipt_MASQUERADE 3616 1 xt_tcpudp 3072 23 iptable_nat 7204 1 nf_nat 17964 2 ipt_MASQUERADE,iptable_nat xt_state 2432 1 ipt_LOG 5952 4 nf_conntrack_ftp 9664 0 nf_conntrack_ipv4 17772 3 iptable_nat nf_conntrack 60424 6 ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conntrack_ftp,nf_conntrack_ipv4 nfnetlink 5752 3 nf_nat,nf_conntrack_ipv4,nf_conntrack iptable_filter 2944 1 ip_tables 12260 2 iptable_nat,iptable_filter x_tables 14372 6 ipt_MASQUERADE,xt_tcpudp,iptable_nat,xt_state,ipt_LOG,ip_tables nls_iso8859_1 4128 2 ntfs 203968 1 dm_snapshot 16516 0 dm_mirror 20928 0 dm_mod 52160 2 dm_snapshot,dm_mirror smsc47b397 6340 0 snd_hda_intel 239160 2 snd_pcm_oss 39200 1 snd_pcm 72324 2 snd_hda_intel,snd_pcm_oss snd_mixer_oss 15424 1 snd_pcm_oss snd_seq_dummy 3748 0 snd_seq_oss 29408 0 snd_seq_midi 8160 0 snd_rawmidi 22624 1 snd_seq_midi snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi snd_seq 46320 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 21028 2 snd_pcm,snd_seq snd_seq_device 7692 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq pcspkr 3104 0 cdc_acm 15136 0 parport_pc 33796 1 parport 33960 3 ppdev,lp,parport_pc psmouse 36016 0 iTCO_wdt 9924 0 rtc 12856 0 evdev 9312 3 tsdev 7968 0 serio_raw 6692 0 joydev 9568 0 snd 48324 15 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7520 2 snd snd_page_alloc 9512 2 snd_hda_intel,snd_pcm ext3 121224 1 jbd 55336 1 ext3 mbcache 8260 1 ext3 ide_cd 36416 1 cdrom 32832 1 ide_cd usbhid 25792 0 hid 25248 1 usbhid piix 8868 0 [permanent] generic 4836 0 [permanent] ide_core 113764 3 ide_cd,piix,generic e100 33644 0 mii 5280 1 e100 ehci_hcd 30796 0 ata_generic 7556 0 uhci_hcd 22960 0 usbcore 125096 5 cdc_acm,usbhid,ehci_hcd,uhci_hcd tg3 100260 0 thermal 13416 0 processor 31016 2 acpi_cpufreq,thermal fan 4836 0 sd_mod 27136 3 ahci 21380 2 libata 115664 2 ata_generic,ahci scsi_mod 136620 2 sd_mod,libata ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 955X Express Memory Controller Hub [8086:2774] Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 955X Express PCI Express Root Port [8086:2775] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e1000000-e31fffff Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=28, subordinate=28, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 Memory behind bridge: e0500000-e07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at 2000 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 2020 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 2040 [size=32] 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 2060 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: e0200000-e04fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 20a0 [size=16] 00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 219 Region 0: I/O ports at 20d0 [size=8] Region 1: I/O ports at 20e8 [size=4] Region 2: I/O ports at 20d8 [size=8] Region 3: I/O ports at 20ec [size=4] Region 4: I/O ports at 20b0 [size=16] Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1) (prog-if 00 [VGA]) Subsystem: nVidia Corporation Unknown device [10de:029d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: <access denied> 05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 0d) Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter [8086:1050] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1000 [size=64] Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01) Subsystem: Hewlett-Packard Company Unknown device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 218 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/2 CPU cores) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-2-686 depends on: ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.22-2-686 recommends: ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.22-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.22-2-686/prerm/would-invalidate-boot-loader-2.6.22-2-686: true linux-image-2.6.22-2-686/preinst/elilo-initrd-2.6.22-2-686: true linux-image-2.6.22-2-686/preinst/abort-overwrite-2.6.22-2-686: linux-image-2.6.22-2-686/preinst/lilo-initrd-2.6.22-2-686: true linux-image-2.6.22-2-686/postinst/depmod-error-initrd-2.6.22-2-686: false linux-image-2.6.22-2-686/preinst/overwriting-modules-2.6.22-2-686: true linux-image-2.6.22-2-686/preinst/failed-to-move-modules-2.6.22-2-686: linux-image-2.6.22-2-686/preinst/bootloader-initrd-2.6.22-2-686: true linux-image-2.6.22-2-686/postinst/create-kimage-link-2.6.22-2-686: true linux-image-2.6.22-2-686/postinst/bootloader-error-2.6.22-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-2-686/postinst/kimage-is-a-directory: linux-image-2.6.22-2-686/postinst/old-dir-initrd-link-2.6.22-2-686: true linux-image-2.6.22-2-686/prerm/removing-running-kernel-2.6.22-2-686: true linux-image-2.6.22-2-686/preinst/initrd-2.6.22-2-686: linux-image-2.6.22-2-686/postinst/depmod-error-2.6.22-2-686: false linux-image-2.6.22-2-686/preinst/already-running-this-2.6.22-2-686: linux-image-2.6.22-2-686/postinst/old-initrd-link-2.6.22-2-686: true linux-image-2.6.22-2-686/postinst/bootloader-test-error-2.6.22-2-686: linux-image-2.6.22-2-686/preinst/abort-install-2.6.22-2-686: linux-image-2.6.22-2-686/postinst/old-system-map-link-2.6.22-2-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]