On Wed, Nov 05, 2008 at 10:10:54PM +0100, Frans Pop wrote:
reassign 504016 linux-2.6
thanks
On Saturday 01 November 2008, Hans-Joachim Zierke wrote:
But I found it by completely disabling almost everything in the BIOS,
getting a success, then systematically reenabling stuff.
It's the
reassign 504016 linux-2.6
thanks
On Saturday 01 November 2008, Hans-Joachim Zierke wrote:
But I found it by completely disabling almost everything in the BIOS,
getting a success, then systematically reenabling stuff.
It's the Promise ATA-100 BIOS. If I reset that BIOS from Auto to
Disabled,
On Thursday 30 October 2008, Hans-Joachim Zierke wrote:
In expert mode, the result is exactly the same:
Loading /install.386/vmlinuz .
Loading /install.386/initrd.gz ..
..ready.
OK. This is very clearly a kernel
On 01.11.2008 16:08:13, Frans Pop wrote:
OK. This is very clearly a kernel problem, not an installer problem. We
can try one more thing, but I think you'll have to report this to the
upstream kernel developers.
Please try booting in expert mode using a current daily built image with
Package: Installation-reports
Boot method: Booted from CD
The following is copied from Etch dmesg
sym0: 810a rev 0x12 at pci :00:0c.0 irq 11
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
On Thursday 30 October 2008, Hans-Joachim Zierke wrote:
Comments/Problems:
BIOS boot uneventful, Hostadapter BIOS reports No Emulation mode,
Installation CD screen comes up fine with all the help options. After
Enter, I get
Loading /something-386/vmlinuz .
Loading
On 30.10.2008 17:27:54, Frans Pop wrote:
Loading /something-386/vmlinuz .
Loading /something-386/initrd.gz
... .ready.
Please try booting in expert mode (see advanced menu) and give us the boot
log
7 matches
Mail list logo
