Package: src:linux Version: 3.10.5-1 Severity: normal The Lenovo Yoga 11s laptop boots to a black screen (backlight off) when i915 loads. This is due to the common backlight control inversion problem, and can be worked around with i915.invert_brightness=1
This should be enough information to add an entry for this laptop to the intel_quirks table: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core process or Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:3977] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 2000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 This affects both the kernel I'm running and the one in stable too. -- Package-specific info: ** Version: Linux version 3.10-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=8f9f53ff-f80d-468c-9310-892de8846629 ro quiet i915.invert_brightness=1 ** Tainted: WCO (5632) * Taint on warning. * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [49876.205573] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [49876.205573] ==> rssi_level:3, rate_bitmap:0x00000ff5 [49882.218012] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [49882.218012] ==> rssi_level:2, rate_bitmap:0x00000ff0 [50050.562890] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [50050.562890] ==> rssi_level:3, rate_bitmap:0x00000ff5 [50056.566202] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [50056.566202] ==> rssi_level:2, rate_bitmap:0x00000ff0 [50311.082032] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [50311.082032] ==> rssi_level:3, rate_bitmap:0x00000ff5 [50335.121810] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [50335.121810] ==> rssi_level:2, rate_bitmap:0x00000ff0 [50515.221777] EXT2-fs (sdf): previous I/O error to superblock detected [50515.221777] [50515.221793] EXT2-fs (sdf): error: ext2_readdir: bad page in #2 [50518.567000] EXT2-fs (sdf): previous I/O error to superblock detected [50518.567000] [50518.567067] EXT2-fs (sdf): previous I/O error to superblock detected [50518.567067] [50518.567093] EXT2-fs (sdf): previous I/O error to superblock detected [50518.567093] [50551.844610] EXT2-fs (sde): previous I/O error to superblock detected [50551.844610] [50551.844624] EXT2-fs (sde): error: ext2_readdir: bad page in #2 [50562.524764] EXT2-fs (sde): previous I/O error to superblock detected [50562.524764] [50562.524776] EXT2-fs (sde): error: ext2_get_inode: unable to read inode block - inode=2, block=129 [50562.524796] EXT2-fs (sde): previous I/O error to superblock detected [50562.524796] [50562.524845] EXT2-fs (sde): previous I/O error to superblock detected [50562.524845] [50562.524878] EXT2-fs (sde): previous I/O error to superblock detected [50562.524878] [50568.515687] EXT2-fs (sdd): previous I/O error to superblock detected [50568.515687] [50568.515908] EXT2-fs (sdd): previous I/O error to superblock detected [50568.515908] [50568.515940] EXT2-fs (sdd): previous I/O error to superblock detected [50568.515940] [50571.209716] EXT2-fs (sdc): previous I/O error to superblock detected [50571.209716] [50571.209762] EXT2-fs (sdc): previous I/O error to superblock detected [50571.209762] [50571.209781] EXT2-fs (sdc): previous I/O error to superblock detected [50571.209781] [50615.856235] usb 1-1.2: new high-speed USB device number 14 using ehci-pci [50616.598733] usb 1-1.2: New USB device found, idVendor=1058, idProduct=0730 [50616.598740] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [50616.598744] usb 1-1.2: Product: My Passport 0730 [50616.598747] usb 1-1.2: Manufacturer: Western Digital [50616.598750] usb 1-1.2: SerialNumber: 575842314143305334373633 [50616.599318] usb-storage 1-1.2:1.0: USB Mass Storage device detected [50616.599629] scsi14 : usb-storage 1-1.2:1.0 [50618.668473] scsi 14:0:0:0: Direct-Access WD My Passport 0730 1012 PQ: 0 ANSI: 6 [50618.669586] scsi 14:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6 [50618.670300] sd 14:0:0:0: Attached scsi generic sg2 type 0 [50618.670817] scsi 14:0:0:1: Attached scsi generic sg3 type 13 [50622.548050] sd 14:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [50622.549158] sd 14:0:0:0: [sdc] Write Protect is off [50622.549167] sd 14:0:0:0: [sdc] Mode Sense: 47 00 10 08 [50622.550498] sd 14:0:0:0: [sdc] No Caching mode page present [50622.550504] sd 14:0:0:0: [sdc] Assuming drive cache: write through [50622.554123] sd 14:0:0:0: [sdc] No Caching mode page present [50622.554141] sd 14:0:0:0: [sdc] Assuming drive cache: write through [50622.571963] sdc: sdc1 [50622.572682] ses 14:0:0:1: Attached Enclosure device [50622.575850] sd 14:0:0:0: [sdc] No Caching mode page present [50622.575856] sd 14:0:0:0: [sdc] Assuming drive cache: write through [50622.575861] sd 14:0:0:0: [sdc] Attached SCSI disk [50623.036141] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [50623.040316] EXT4-fs (sdc1): recovery complete [50623.044124] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [51170.789392] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51170.789392] ==> rssi_level:3, rate_bitmap:0x00000ff5 [51172.794278] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51172.794278] ==> rssi_level:2, rate_bitmap:0x00000ff0 [51222.894094] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51222.894094] ==> rssi_level:3, rate_bitmap:0x00000ff5 [51226.902492] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51226.902492] ==> rssi_level:2, rate_bitmap:0x00000ff0 [51403.261096] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51403.261096] ==> rssi_level:3, rate_bitmap:0x00000ff5 [51491.437140] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51491.437140] ==> rssi_level:2, rate_bitmap:0x00000ff0 [51569.679755] usb 1-1.2: USB disconnect, device number 14 [51569.967364] Buffer I/O error on device sdc1, logical block 121667584 [51569.967370] lost page write due to I/O error on sdc1 [51569.967374] JBD2: Error -5 detected when updating journal superblock for sdc1-8. [51954.353400] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51954.353400] ==> rssi_level:3, rate_bitmap:0x00000ff5 [51960.365314] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [51960.365314] ==> rssi_level:2, rate_bitmap:0x00000ff0 [52014.473153] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [52014.473153] ==> rssi_level:3, rate_bitmap:0x00000ff5 [52020.486441] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [52020.486441] ==> rssi_level:2, rate_bitmap:0x00000ff0 [54066.569949] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [54066.569949] ==> rssi_level:3, rate_bitmap:0x00000ff5 [54078.593237] UpdateHalRAMask8192CUsb => mac_id:0, networkType:0x03, mask:0x00000fff [54078.593237] ==> rssi_level:2, rate_bitmap:0x00000ff0 ** Model information sys_vendor: LENOVO product_name: 20246 product_version: Lenovo IdeaPad Yoga 11S chassis_vendor: LENOVO chassis_version: Lenovo IdeaPad Yoga 11S bios_vendor: LENOVO bios_version: 77CN19WW(V1.05) board_vendor: LENOVO board_name: Yoga2 board_version: 31900003Std ** Loaded modules: ses enclosure 8723au(O) tun sit tunnel4 ip_tunnel bnep rfcomm bluetooth uinput arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 cfg80211 crc_ccitt cpuid ext2 usb_storage nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc nls_utf8 nls_cp437 vfat fat snd_hda_codec_hdmi snd_hda_codec_conexant uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core hid_sensor_hub videodev media joydev hid_multitouch hid_generic usbhid hid coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel cryptd rts5139(C) iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer psmouse serio_raw microcode evdev snd pcspkr ideapad_laptop sparse_keymap rfkill battery efivars wmi i2c_i801 ac i915 soundcore mperf video lpc_ich mfd_core button drm_kms_helper drm processor i2c_algo_bit mei_me i2c_core mei ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif thermal thermal_sys xhci_hcd ahci libahci ehci_pci ehci_hcd libata usbcore scsi_mod usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:3977] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 2000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: Memory at cfa08000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e041c000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0421000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0418000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04) Subsystem: Lenovo Device [17aa:3977] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:3977] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 2088 [size=8] Region 1: I/O ports at 2094 [size=4] Region 2: I/O ports at 2080 [size=8] Region 3: I/O ports at 2090 [size=4] Region 4: I/O ports at 2060 [size=32] Region 5: Memory at e041f000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Lenovo Device [17aa:3977] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at e041d000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 2040 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller [8086:1e24] (rev 04) Subsystem: Lenovo Device [17aa:3977] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: Memory at e041e000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> ** USB devices: Bus 002 Device 005: ID 04f2:b35e Chicony Electronics Co., Ltd Bus 002 Device 004: ID 0bda:1724 Realtek Semiconductor Corp. Bus 002 Device 003: ID 2047:0855 Texas Instruments Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 03eb:8814 Atmel Corp. Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.10-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.10-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.113 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.10-2-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.10-2-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.10 <none> Versions of packages linux-image-3.10-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.40 pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information excluded -- see shy jo
signature.asc
Description: Digital signature