Good morning Petter
reassign 583312 nvidia-glx
severity 583312 serious
thanks
Thanks for passing it on. Even if not all users, a sufficient portion
probably. Have replied all in this email.
I had a look at the open bugs against nvidia-glx, and came across
#521699 which seem similar to your problem. Reassigning to the
nvidia-glx package to get input from the maintainers of that package,
and because I believe the problem is in that package. Setting
serverity to serious, based on the assumtion that this problem will
affect all users with parallel booting now enabled by default.
Does it work to add for example 'sleep 5' at the end of the start
section in /etc/init.d/nvidia-glx? Perhaps something need more time
before X is started?
You seem to have hit the nail on the head. Added that line to the script
nvidia-glx, commented out the delay I had added in /etc/kde4/kdm/kdmrc,
rebooted, and it came up to a normal logon screen without even
displaying the green nVidia logo. I then went in and made sure
everything was set back to what it was when this issue started for me -
took out those two lines from the nvidia-glx script that were tried
earlier, ensured that numbering was still S17nvidia-glx in rc2.d.
Rebooted. 6 times. Each time without any errors, without seeing the
nVidia logo, and boot was acceptably and perceptibly quicker than what
was before even the update of the initscripts yesterday. Only things
couldn't change was whatever changes running update-rc.d made earlier in
the day (see history of problem).
Checked the various logs, and was unable to see anything that may help.
Anything that I can do that can help to isolate this further?
Ran /usr/share/insserv/make-testsuite again, and have attached the
output in case of any use.
After the to and fro'ing during the course of the day, am inclined to
accept your view now that the problem is in the nvidia package.
Happy hacking,
With greetings
Romane
set +C
cat <<'EOF' > $insconf
$local_fs +mountall +mountoverflowtmp +umountfs
$network +networking +ifupdown
$named +named +dnsmasq +lwresd +bind9 $network
$remote_fs $local_fs +mountnfs +mountnfs-bootclean +umountnfs +sendsigs
$syslog +rsyslog +sysklogd +syslog-ng +dsyslog +inetutils-syslogd
$portmap portmap
$time +hwclock
<interactive> glibc udev console-screen keymap keyboard-setup console-setup
cryptdisks cryptdisks-early checkfs-loop
EOF
set -C
addscript acpid <<'EOF'
### BEGIN INIT INFO
# Provides: acpid
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# X-Start-Before: kdm gdm xdm hal
# X-Stop-After: kdm gdm xdm hal
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: Start the Advanced Configuration and Power Interface daemon
# Description: Provide a socket for X11, hald and others to multiplex
# kernel ACPI events.
### END INIT INFO
EOF
addscript atd <<'EOF'
### BEGIN INIT INFO
# Provides: atd
# Required-Start: $syslog $time $remote_fs
# Required-Stop: $syslog $time $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Deferred execution scheduler
# Description: Debian init script for the atd deferred executions
# scheduler
### END INIT INFO
EOF
addscript bootlogd <<'EOF'
### BEGIN INIT INFO
# Provides: bootlogd
# Required-Start: mountdevsubfs
# X-Start-Before: hostname keymap keyboard-setup procps pcmcia hwclock
hwclockfirst hdparm hibernate-cleanup lvm2
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Start or stop bootlogd.
# Description: Starts or stops the bootlogd log program
# which logs boot messages.
### END INIT INFO
EOF
addscript bootlogs <<'EOF'
### BEGIN INIT INFO
# Provides: bootlogs
# Required-Start: hostname $local_fs
# Required-Stop:
# Should-Start: $x-display-manager gdm kdm xdm ldm sdm wdm nodm
# Default-Start: 1 2 3 4 5
# Default-Stop:
# Short-Description: Log file handling to be done during bootup.
# Description: Various things that don't need to be done particularly
# early in the boot, just before getty is run.
### END INIT INFO
EOF
addscript bootmisc.sh <<'EOF'
### BEGIN INIT INFO
# Provides: bootmisc
# Required-Start: $remote_fs
# Required-Stop:
# Should-Start: udev
# Default-Start: S
# Default-Stop:
# Short-Description: Miscellaneous things to be done during bootup.
# Description: Some cleanup. Note, it need to run after
mountnfs-bootclean.sh.
### END INIT INFO
EOF
addscript checkfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides: checkfs
# Required-Start: checkroot
# Required-Stop:
# Should-Start: mtab
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Short-Description: Check all filesystems.
### END INIT INFO
EOF
addscript checkroot.sh <<'EOF'
### BEGIN INIT INFO
# Provides: checkroot
# Required-Start: mountdevsubfs hostname
# Required-Stop:
# Should-Start: keymap hwclockfirst hdparm bootlogd
# Should-stop:
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Short-Description: Check to root file system.
### END INIT INFO
EOF
addscript console-setup <<'EOF'
### BEGIN INIT INFO
# Provides: console-setup
# Required-Start: $remote_fs
# Required-Stop:
# Should-Start: console-screen kbd
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Short-Description: Set console font and keymap
### END INIT INFO
EOF
addscript cron <<'EOF'
### BEGIN INIT INFO
# Provides: cron
# Required-Start: $remote_fs $syslog $time
# Required-Stop: $remote_fs $syslog $time
# Should-Start: slapd autofs ypbind nscd
# Should-Stop: slapd autofs ypbind nscd
# Default-Start: 2 3 4 5
# Default-Stop: 1
# Short-Description: Regular background program processing daemon
# Description: cron is a standard UNIX program that runs user-specified
# programs at periodic scheduled times. vixie cron adds a
# number of features to the basic UNIX cron, including better
# security and more powerful configuration options.
### END INIT INFO
EOF
addscript cups <<'EOF'
### BEGIN INIT INFO
# Provides: cups
# Required-Start: $syslog $remote_fs
# Required-Stop: $syslog $remote_fs
# Should-Start: $network avahi
# Should-Stop: $network
# X-Start-Before: samba
# X-Stop-After: samba
# Default-Start: 2 3 4 5
# Default-Stop: 1
# Short-Description: CUPS Printing spooler and server
### END INIT INFO
EOF
addscript dbus <<'EOF'
### BEGIN INIT INFO
# Provides: dbus
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: D-Bus systemwide message bus
# Description: D-Bus is a simple interprocess messaging system, used
# for sending messages between applications.
### END INIT INFO
EOF
addscript dirmngr <<'EOF'
### BEGIN INIT INFO
# Provides: dirmngr
# Required-Start: $local_fs $network $remote_fs
# Required-Stop: $local_fs $network $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start DirMngr daemon
# Description: DirMngr is a server for managing and downloading certificate
# revocation lists.
### END INIT INFO
EOF
addscript exim4 <<'EOF'
### BEGIN INIT INFO
# Provides: exim4
# Required-Start: $remote_fs $syslog $named $network $time
# Required-Stop: $remote_fs $syslog $named $network
# Should-Start: postgresql mysql clamav-daemon greylist spamassassin
# Should-Stop: postgresql mysql clamav-daemon greylist spamassassin
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: exim Mail Transport Agent
# Description: exim is a Mail Transport agent
### END INIT INFO
EOF
addscript fuse <<'EOF'
### BEGIN INIT INFO
# Provides: fuse
# Required-Start: $remote_fs
# Required-Stop: $remote_fs
# Default-Start: S
# Default-Stop: 0 6
# Short-Description: Filesystem in userspace
# Description: This file load all what's needed to make fuse work fine
### END INIT INFO
EOF
addscript hal <<'EOF'
### BEGIN INIT INFO
# Provides: hal
# Required-Start: $remote_fs dbus
# Required-Stop: $remote_fs dbus
# Should-Start: $syslog acpid
# Should-Stop: $syslog acpid
# Default-Start: 2 3 4 5
# Default-Stop: 1
# Short-Description: Hardware abstraction layer
# Description: The HAL daemon collects and maintains information about
# your hardware.
### END INIT INFO
EOF
addscript halt <<'EOF'
### BEGIN INIT INFO
# Provides: halt
# Required-Start:
# Required-Stop:
# Default-Start:
# Default-Stop: 0
# Short-Description: Execute the halt command.
# Description:
### END INIT INFO
EOF
addscript hdparm <<'EOF'
### BEGIN INIT INFO
# Provides: hdparm
# Required-Start: mountdevsubfs
# Required-Stop:
# Should-Start: udev
# Default-Start: S
# Default-Stop:
# Short-Description: Tune IDE hard disks
### END INIT INFO
EOF
addscript hostname.sh <<'EOF'
### BEGIN INIT INFO
# Provides: hostname
# Required-Start:
# Required-Stop:
# Should-Start: glibc
# Default-Start: S
# Default-Stop:
# Short-Description: Set hostname based on /etc/hostname
# Description: Read the machines hostname from /etc/hostname, and
# update the kernel value with this value. If
# /etc/hostname is empty, the current kernel value
# for hostname is used. If the kernel value is
# empty, the value 'localhost' is used.
### END INIT INFO
EOF
addscript hwclock.sh <<'EOF'
### BEGIN INIT INFO
# Provides: hwclock
# Required-Start: checkroot
# Required-Stop: $local_fs
# Default-Start: S
# Default-Stop: 0 6
### END INIT INFO
EOF
addscript hwclockfirst.sh <<'EOF'
### BEGIN INIT INFO
# Provides: hwclockfirst
# Required-Start: mountdevsubfs
# Required-Stop:
# Default-Start: S
# X-Start-Before: checkroot
# Default-Stop:
### END INIT INFO
EOF
addscript ifupdown <<'EOF'
### BEGIN INIT INFO
# Provides: ifupdown
# Required-Start: ifupdown-clean
# Required-Stop: $local_fs
# Default-Start: S
# Default-Stop: 0 6
# Short-Description: Prepare the system for taking up interfaces.
### END INIT INFO
EOF
addscript ifupdown-clean <<'EOF'
### BEGIN INIT INFO
# Provides: ifupdown-clean
# Required-Start: checkroot
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Clean old interface status info during boot.
### END INIT INFO
EOF
addscript kbd <<'EOF'
### BEGIN INIT INFO
# Provides: kbd
# Required-Start: $remote_fs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Description: Set console screen modes and fonts
# Short-Description: Prepare console
### END INIT INFO
EOF
addscript kdm <<'EOF'
### BEGIN INIT INFO
# Provides: kdm
# Required-Start: $local_fs $remote_fs
# Required-Stop: $local_fs $remote_fs
# Should-Start: console-screen kbd acpid dbus hal
# Should-Stop: console-screen kbd
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: X display manager for KDE
# Description: KDM manages a collection of X servers, which may be on the
local host or remote machines.
### END INIT INFO
EOF
addscript keyboard-setup <<'EOF'
### BEGIN INIT INFO
# Provides: keyboard-setup
# Required-Start: mountkernfs
# Required-Stop:
# Should-Start: keymap udev
# X-Start-Before: checkroot
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Short-Description: Set preliminary keymap
# Description: Set the console keyboard as early as possible
# so during the file systems checks the administrator
# can interact. At this stage of the boot process
# only the ASCII symbols are supported.
### END INIT INFO
EOF
addscript killprocs <<'EOF'
### BEGIN INIT INFO
# Provides: killprocs
# Required-Start: $local_fs
# Required-Stop:
# Default-Start: 1
# Default-Stop:
# Short-Description: executed by init(8) upon entering runlevel 1 (single).
### END INIT INFO
EOF
addscript module-init-tools <<'EOF'
### BEGIN INIT INFO
# Provides: module-init-tools
# Required-Start:
# Required-Stop:
# Should-Start: checkroot
# Should-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Process /etc/modules.
# Description: Load the modules listed in /etc/modules.
### END INIT INFO
EOF
addscript mountall-bootclean.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountall-bootclean
# Required-Start: mountall
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: bootclean after mountall.
# Description: Clean temporary filesystems after
# all local filesystems have been mounted.
### END INIT INFO
EOF
addscript mountall.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountall
# Required-Start: checkfs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Mount all filesystems.
# Description:
### END INIT INFO
EOF
addscript mountdevsubfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountdevsubfs
# Required-Start: mountkernfs
# Required-Stop:
# Should-Start: udev
# Default-Start: S
# Default-Stop:
# Short-Description: Mount special file systems under /dev.
# Description: Mount the virtual filesystems the kernel provides
# that ordinarily live under the /dev filesystem.
### END INIT INFO
EOF
addscript mountkernfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountkernfs
# Required-Start:
# Required-Stop:
# Should-Start: glibc
# Default-Start: S
# Default-Stop:
# Short-Description: Mount kernel virtual file systems.
# Description: Mount initial set of virtual filesystems the kernel
# provides and that are required by everything.
### END INIT INFO
EOF
addscript mountnfs-bootclean.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountnfs-bootclean
# Required-Start: $local_fs mountnfs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: bootclean after mountnfs.
# Description: Clean temporary filesystems after
# network filesystems have been mounted.
### END INIT INFO
EOF
addscript mountnfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mountnfs
# Required-Start: $local_fs
# Required-Stop:
# Should-Start: $network $portmap nfs-common udev-mtab
# Default-Start: S
# Default-Stop:
# Short-Description: Wait for network file systems to be mounted
# Description: Network file systems are mounted by
# /etc/network/if-up.d/mountnfs in the background
# when interfaces are brought up; this script waits
# for them to be mounted before carrying on.
### END INIT INFO
EOF
addscript mountoverflowtmp <<'EOF'
### BEGIN INIT INFO
# Provides: mountoverflowtmp
# Required-Start: mountall-bootclean
# Required-Stop: umountfs
# Default-Start: S
# Default-Stop:
# Short-Description: mount emergency /tmp.
# Description: Mount a tmpfs on /tmp if there would
# otherwise be too little space to log in.
### END INIT INFO
EOF
addscript mtab.sh <<'EOF'
### BEGIN INIT INFO
# Provides: mtab
# Required-Start: checkroot
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Update mtab file.
# Description: Update the mount program's mtab file after
# all local filesystems have been mounted.
### END INIT INFO
EOF
addscript network-manager <<'EOF'
### BEGIN INIT INFO
# Provides: network-manager
# Required-Start: $remote_fs dbus udev
# Required-Stop: $remote_fs dbus udev
# Should-Start: $syslog
# Should-Stop: $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: network connection manager
# Description: Daemon for automatically switching network
# connections to the best available connection.
### END INIT INFO
EOF
addscript networking <<'EOF'
### BEGIN INIT INFO
# Provides: networking
# Required-Start: mountkernfs $local_fs
# Required-Stop: $local_fs
# Should-Start: ifupdown
# Should-Stop: ifupdown
# Default-Start: S
# Default-Stop: 0 6
# Short-Description: Raise network interfaces.
### END INIT INFO
EOF
addscript nfs-common <<'EOF'
### BEGIN INIT INFO
# Provides: nfs-common
# Required-Start: $portmap $time
# Required-Stop: $time
# Default-Start: 2 3 4 5 S
# Default-Stop: 0 1 6
# Short-Description: NFS support files common to client and server
# Description: NFS is a popular protocol for file sharing across
# TCP/IP networks. This service provides various
# support functions for NFS mounts.
### END INIT INFO
EOF
addscript nvidia-glx <<'EOF'
### BEGIN INIT INFO
# Provides: nvidia-glx
# Required-Start: $remote_fs
# Required-Stop: $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: messing around with the libGL.so symlink
# Description: messing around with the libGL.so symlink
sleep 5
### END INIT INFO
EOF
addscript nvidia-kernel <<'EOF'
### BEGIN INIT INFO
# Provides: nvidia-kernel
# Required-Start: mountdevsubfs
# Required-Stop:
# Should-Start: udev
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: create NVIDIA device nodes
### END INIT INFO
EOF
addscript openvpn <<'EOF'
### BEGIN INIT INFO
# Provides: openvpn
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Should-Start: network-manager
# Should-Stop: network-manager
# X-Start-Before: $x-display-manager gdm kdm xdm wdm ldm sdm nodm
# X-Interactive: true
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Openvpn VPN service
### END INIT INFO
EOF
addscript portmap <<'EOF'
### BEGIN INIT INFO
# Provides: portmap
# Required-Start: $network $local_fs
# Required-Stop: $network $local_fs
# Default-Start: S 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: The RPC portmapper
# Description: Portmap is a server that converts RPC (Remote
# Procedure Call) program numbers into DARPA
# protocol port numbers. It must be running in
# order to make RPC calls. Services that use
# RPC include NFS and NIS.
### END INIT INFO
EOF
addscript pppd-dns <<'EOF'
### BEGIN INIT INFO
# Provides: pppd-dns
# Required-Start: $local_fs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Restore resolv.conf if the system crashed.
### END INIT INFO
EOF
addscript preload <<'EOF'
### BEGIN INIT INFO
# Provides: preload.sourceforge.net
# Required-Start: $local_fs $remote_fs $time
# Required-Stop: $local_fs $remote_fs $time
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Adaptive readahead daemon
# Description: Analyzes what applications users run and tries to predict
# what they would like to run and loads them into memory
# beforehand.
### END INIT INFO
EOF
addscript procps <<'EOF'
### BEGIN INIT INFO
# Provides: procps
# Required-Start: mountkernfs $local_fs
# Required-Stop:
# Should-Start: udev module-init-tools
# Default-Start: S
# Default-Stop:
# Short-Description: Configure kernel parameters at boottime
# Description: Loads kernel parameters that are specified in /etc/sysctl.conf
### END INIT INFO
EOF
addscript qemu-kvm <<'EOF'
### BEGIN INIT INFO
# Provides: qemu-kvm kvm
# Required-Start:
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: KVM init script
# Description: This script loads the kernel modules needed by kvm
### END INIT INFO
EOF
addscript rc.local <<'EOF'
### BEGIN INIT INFO
# Provides: rc.local
# Required-Start: $remote_fs $syslog $all
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: Run /etc/rc.local if it exist
### END INIT INFO
EOF
addscript reboot <<'EOF'
### BEGIN INIT INFO
# Provides: reboot
# Required-Start:
# Required-Stop:
# Default-Start:
# Default-Stop: 6
# Short-Description: Execute the reboot command.
# Description:
### END INIT INFO
EOF
addscript rmnologin <<'EOF'
### BEGIN INIT INFO
# Provides: rmnologin
# Required-Start: $remote_fs $all
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: Remove /etc/nologin at boot
# Description: This script removes the /etc/nologin file as the
# last step in the boot process, if DELAYLOGIN=yes.
# If DELAYLOGIN=no, /etc/nologin was not created by
# bootmisc earlier in the boot process.
### END INIT INFO
EOF
addscript rsyslog <<'EOF'
### BEGIN INIT INFO
# Provides: rsyslog
# Required-Start: $remote_fs $time
# Required-Stop: umountnfs $time
# X-Stop-After: sendsigs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: enhanced syslogd
# Description: Rsyslog is an enhanced multi-threaded syslogd.
# It is quite compatible to stock sysklogd and can be
# used as a drop-in replacement.
### END INIT INFO
EOF
addscript samba <<'EOF'
### BEGIN INIT INFO
# Provides: samba
# Required-Start: $network $local_fs $remote_fs
# Required-Stop: $network $local_fs $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Should-Start: slapd
# Should-Stop: slapd
# Short-Description: start Samba daemons (nmbd and smbd)
### END INIT INFO
EOF
addscript saned <<'EOF'
### BEGIN INIT INFO
# Provides: saned
# Required-Start: $syslog $local_fs $remote_fs
# Required-Stop: $syslog $local_fs $remote_fs
# Should-Start: dbus avahi
# Should-Stop: dbus avahi
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: SANE network scanner server
# Description: saned makes local scanners available over the
# network.
### END INIT INFO
EOF
addscript sendsigs <<'EOF'
### BEGIN INIT INFO
# Provides: sendsigs
# Required-Start:
# Required-Stop: umountnfs
# Default-Start:
# Default-Stop: 0 6
# Short-Description: Kill all remaining processes.
# Description:
### END INIT INFO
EOF
addscript single <<'EOF'
### BEGIN INIT INFO
# Provides: single
# Required-Start: $local_fs $all killprocs
# Required-Stop:
# Default-Start: 1
# Default-Stop:
# Short-Description: executed by init(8) upon entering runlevel 1 (single).
### END INIT INFO
EOF
addscript speech-dispatcher <<'EOF'
### BEGIN INIT INFO
# Provides: speech-dispatcher
# Required-Start:
# Required-Stop:
# Should-Start: festival
# Should-Stop: festival
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Speech Dispatcher
# Description: Common interface to speech synthesizers
### END INIT INFO
EOF
addscript stop-bootlogd <<'EOF'
### BEGIN INIT INFO
# Provides: stop-bootlogd
# Required-Start: $local_fs $all
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: Stop bootlogd
# Description: See the init.d/bootlogd script
### END INIT INFO
EOF
addscript stop-bootlogd-single <<'EOF'
### BEGIN INIT INFO
# Provides: stop-bootlogd-single
# Required-Start: $local_fs $all
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Stop bootlogd in single user mode
# Description: See the init.d/bootlogd script
### END INIT INFO
EOF
addscript udev <<'EOF'
### BEGIN INIT INFO
# Provides: udev
# Required-Start: mountkernfs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# X-Interactive: true
# Short-Description: Start udevd, populate /dev and load drivers.
### END INIT INFO
EOF
addscript udev-mtab <<'EOF'
### BEGIN INIT INFO
# Provides: udev-mtab
# Required-Start: udev $local_fs
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Add to mtab the entry for /dev.
### END INIT INFO
EOF
addscript umountfs <<'EOF'
### BEGIN INIT INFO
# Provides: umountfs
# Required-Start:
# Required-Stop: umountroot
# Default-Start:
# Default-Stop: 0 6
# Short-Description: Turn off swap and unmount all local file systems.
# Description:
### END INIT INFO
EOF
addscript umountnfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides: umountnfs
# Required-Start:
# Required-Stop: umountfs
# Should-Stop: $network $portmap nfs-common
# Default-Start:
# Default-Stop: 0 6
# Short-Description: Unmount all network filesystems except the root fs.
# Description: Also unmounts all virtual filesystems (proc, devfs,
# devpts, usbfs, sysfs) that are not mounted at the
# top level.
### END INIT INFO
EOF
addscript umountroot <<'EOF'
### BEGIN INIT INFO
# Provides: umountroot
# Required-Start:
# Required-Stop:
# Should-Stop: halt reboot kexec
# Default-Start:
# Default-Stop: 0 6
# Short-Description: Mount the root filesystem read-only.
### END INIT INFO
EOF
addscript urandom <<'EOF'
### BEGIN INIT INFO
# Provides: urandom
# Required-Start: $remote_fs
# Required-Stop: $remote_fs
# Default-Start: S
# Default-Stop: 0 6
# Short-Description: Save and restore random seed between restarts.
# Description: This script saves the random seed between restarts.
# It is called from the boot, halt and reboot scripts.
### END INIT INFO
EOF
addscript x11-common <<'EOF'
### BEGIN INIT INFO
# Provides: x11-common
# Required-Start: $local_fs
# Required-Stop: $local_fs
# Default-Start: S
# Default-Stop:
### END INIT INFO
EOF
cd $tmpdir/etc
mkdir rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d rcS.d
ln -s ../init.d/atd rc0.d/K01atd
ln -s ../init.d/dirmngr rc0.d/K01dirmngr
ln -s ../init.d/exim4 rc0.d/K01exim4
ln -s ../init.d/fuse rc0.d/K01fuse
ln -s ../init.d/kdm rc0.d/K01kdm
ln -s ../init.d/openvpn rc0.d/K01openvpn
ln -s ../init.d/preload rc0.d/K01preload
ln -s ../init.d/qemu-kvm rc0.d/K01qemu-kvm
ln -s ../init.d/samba rc0.d/K01samba
ln -s ../init.d/saned rc0.d/K01saned
ln -s ../init.d/speech-dispatcher rc0.d/K01speech-dispatcher
ln -s ../init.d/urandom rc0.d/K01urandom
ln -s ../init.d/network-manager rc0.d/K02network-manager
ln -s ../init.d/sendsigs rc0.d/K03sendsigs
ln -s ../init.d/rsyslog rc0.d/K04rsyslog
ln -s ../init.d/umountnfs.sh rc0.d/K05umountnfs.sh
ln -s ../init.d/nfs-common rc0.d/K06nfs-common
ln -s ../init.d/portmap rc0.d/K06portmap
ln -s ../init.d/hwclock.sh rc0.d/K07hwclock.sh
ln -s ../init.d/networking rc0.d/K07networking
ln -s ../init.d/ifupdown rc0.d/K08ifupdown
ln -s ../init.d/umountfs rc0.d/K09umountfs
ln -s ../init.d/umountroot rc0.d/K10umountroot
ln -s ../init.d/halt rc0.d/K11halt
ln -s ../init.d/atd rc1.d/K01atd
ln -s ../init.d/cron rc1.d/K01cron
ln -s ../init.d/dirmngr rc1.d/K01dirmngr
ln -s ../init.d/exim4 rc1.d/K01exim4
ln -s ../init.d/hal rc1.d/K01hal
ln -s ../init.d/kdm rc1.d/K01kdm
ln -s ../init.d/openvpn rc1.d/K01openvpn
ln -s ../init.d/preload rc1.d/K01preload
ln -s ../init.d/qemu-kvm rc1.d/K01qemu-kvm
ln -s ../init.d/samba rc1.d/K01samba
ln -s ../init.d/saned rc1.d/K01saned
ln -s ../init.d/speech-dispatcher rc1.d/K01speech-dispatcher
ln -s ../init.d/cups rc1.d/K02cups
ln -s ../init.d/network-manager rc1.d/K02network-manager
ln -s ../init.d/rsyslog rc1.d/K04rsyslog
ln -s ../init.d/nfs-common rc1.d/K06nfs-common
ln -s ../init.d/portmap rc1.d/K06portmap
ln -s ../init.d/killprocs rc1.d/S01killprocs
ln -s ../init.d/bootlogs rc1.d/S22bootlogs
ln -s ../init.d/single rc1.d/S23single
ln -s ../init.d/exim4 rc2.d/K01exim4
ln -s ../init.d/network-manager rc2.d/K02network-manager
ln -s ../init.d/nvidia-kernel rc2.d/S01nvidia-kernel
ln -s ../init.d/qemu-kvm rc2.d/S01qemu-kvm
ln -s ../init.d/speech-dispatcher rc2.d/S01speech-dispatcher
ln -s ../init.d/portmap rc2.d/S14portmap
ln -s ../init.d/nfs-common rc2.d/S15nfs-common
ln -s ../init.d/dirmngr rc2.d/S17dirmngr
ln -s ../init.d/nvidia-glx rc2.d/S17nvidia-glx
ln -s ../init.d/preload rc2.d/S17preload
ln -s ../init.d/rsyslog rc2.d/S17rsyslog
ln -s ../init.d/acpid rc2.d/S18acpid
ln -s ../init.d/atd rc2.d/S18atd
ln -s ../init.d/cron rc2.d/S18cron
ln -s ../init.d/cups rc2.d/S18cups
ln -s ../init.d/dbus rc2.d/S18dbus
ln -s ../init.d/hal rc2.d/S19hal
ln -s ../init.d/samba rc2.d/S19samba
ln -s ../init.d/saned rc2.d/S19saned
ln -s ../init.d/openvpn rc2.d/S20openvpn
ln -s ../init.d/kdm rc2.d/S21kdm
ln -s ../init.d/bootlogs rc2.d/S22bootlogs
ln -s ../init.d/rc.local rc2.d/S23rc.local
ln -s ../init.d/rmnologin rc2.d/S23rmnologin
ln -s ../init.d/stop-bootlogd rc2.d/S23stop-bootlogd
ln -s ../init.d/nvidia-kernel rc3.d/S01nvidia-kernel
ln -s ../init.d/qemu-kvm rc3.d/S01qemu-kvm
ln -s ../init.d/speech-dispatcher rc3.d/S01speech-dispatcher
ln -s ../init.d/portmap rc3.d/S14portmap
ln -s ../init.d/nfs-common rc3.d/S15nfs-common
ln -s ../init.d/dirmngr rc3.d/S17dirmngr
ln -s ../init.d/nvidia-glx rc3.d/S17nvidia-glx
ln -s ../init.d/preload rc3.d/S17preload
ln -s ../init.d/rsyslog rc3.d/S17rsyslog
ln -s ../init.d/acpid rc3.d/S18acpid
ln -s ../init.d/atd rc3.d/S18atd
ln -s ../init.d/cron rc3.d/S18cron
ln -s ../init.d/cups rc3.d/S18cups
ln -s ../init.d/dbus rc3.d/S18dbus
ln -s ../init.d/exim4 rc3.d/S18exim4
ln -s ../init.d/hal rc3.d/S19hal
ln -s ../init.d/network-manager rc3.d/S19network-manager
ln -s ../init.d/samba rc3.d/S19samba
ln -s ../init.d/saned rc3.d/S19saned
ln -s ../init.d/openvpn rc3.d/S20openvpn
ln -s ../init.d/kdm rc3.d/S21kdm
ln -s ../init.d/bootlogs rc3.d/S22bootlogs
ln -s ../init.d/rc.local rc3.d/S23rc.local
ln -s ../init.d/rmnologin rc3.d/S23rmnologin
ln -s ../init.d/stop-bootlogd rc3.d/S23stop-bootlogd
ln -s ../init.d/nvidia-kernel rc4.d/S01nvidia-kernel
ln -s ../init.d/qemu-kvm rc4.d/S01qemu-kvm
ln -s ../init.d/speech-dispatcher rc4.d/S01speech-dispatcher
ln -s ../init.d/portmap rc4.d/S14portmap
ln -s ../init.d/nfs-common rc4.d/S15nfs-common
ln -s ../init.d/dirmngr rc4.d/S17dirmngr
ln -s ../init.d/nvidia-glx rc4.d/S17nvidia-glx
ln -s ../init.d/preload rc4.d/S17preload
ln -s ../init.d/rsyslog rc4.d/S17rsyslog
ln -s ../init.d/acpid rc4.d/S18acpid
ln -s ../init.d/atd rc4.d/S18atd
ln -s ../init.d/cron rc4.d/S18cron
ln -s ../init.d/cups rc4.d/S18cups
ln -s ../init.d/dbus rc4.d/S18dbus
ln -s ../init.d/exim4 rc4.d/S18exim4
ln -s ../init.d/hal rc4.d/S19hal
ln -s ../init.d/network-manager rc4.d/S19network-manager
ln -s ../init.d/samba rc4.d/S19samba
ln -s ../init.d/saned rc4.d/S19saned
ln -s ../init.d/openvpn rc4.d/S20openvpn
ln -s ../init.d/kdm rc4.d/S21kdm
ln -s ../init.d/bootlogs rc4.d/S22bootlogs
ln -s ../init.d/rc.local rc4.d/S23rc.local
ln -s ../init.d/rmnologin rc4.d/S23rmnologin
ln -s ../init.d/stop-bootlogd rc4.d/S23stop-bootlogd
ln -s ../init.d/nvidia-kernel rc5.d/S01nvidia-kernel
ln -s ../init.d/qemu-kvm rc5.d/S01qemu-kvm
ln -s ../init.d/speech-dispatcher rc5.d/S01speech-dispatcher
ln -s ../init.d/portmap rc5.d/S14portmap
ln -s ../init.d/nfs-common rc5.d/S15nfs-common
ln -s ../init.d/dirmngr rc5.d/S17dirmngr
ln -s ../init.d/nvidia-glx rc5.d/S17nvidia-glx
ln -s ../init.d/preload rc5.d/S17preload
ln -s ../init.d/rsyslog rc5.d/S17rsyslog
ln -s ../init.d/acpid rc5.d/S18acpid
ln -s ../init.d/atd rc5.d/S18atd
ln -s ../init.d/cron rc5.d/S18cron
ln -s ../init.d/cups rc5.d/S18cups
ln -s ../init.d/dbus rc5.d/S18dbus
ln -s ../init.d/exim4 rc5.d/S18exim4
ln -s ../init.d/hal rc5.d/S19hal
ln -s ../init.d/network-manager rc5.d/S19network-manager
ln -s ../init.d/samba rc5.d/S19samba
ln -s ../init.d/saned rc5.d/S19saned
ln -s ../init.d/openvpn rc5.d/S20openvpn
ln -s ../init.d/kdm rc5.d/S21kdm
ln -s ../init.d/bootlogs rc5.d/S22bootlogs
ln -s ../init.d/rc.local rc5.d/S23rc.local
ln -s ../init.d/rmnologin rc5.d/S23rmnologin
ln -s ../init.d/stop-bootlogd rc5.d/S23stop-bootlogd
ln -s ../init.d/atd rc6.d/K01atd
ln -s ../init.d/dirmngr rc6.d/K01dirmngr
ln -s ../init.d/exim4 rc6.d/K01exim4
ln -s ../init.d/fuse rc6.d/K01fuse
ln -s ../init.d/kdm rc6.d/K01kdm
ln -s ../init.d/openvpn rc6.d/K01openvpn
ln -s ../init.d/preload rc6.d/K01preload
ln -s ../init.d/qemu-kvm rc6.d/K01qemu-kvm
ln -s ../init.d/samba rc6.d/K01samba
ln -s ../init.d/saned rc6.d/K01saned
ln -s ../init.d/speech-dispatcher rc6.d/K01speech-dispatcher
ln -s ../init.d/urandom rc6.d/K01urandom
ln -s ../init.d/network-manager rc6.d/K02network-manager
ln -s ../init.d/sendsigs rc6.d/K03sendsigs
ln -s ../init.d/rsyslog rc6.d/K04rsyslog
ln -s ../init.d/umountnfs.sh rc6.d/K05umountnfs.sh
ln -s ../init.d/nfs-common rc6.d/K06nfs-common
ln -s ../init.d/portmap rc6.d/K06portmap
ln -s ../init.d/hwclock.sh rc6.d/K07hwclock.sh
ln -s ../init.d/networking rc6.d/K07networking
ln -s ../init.d/ifupdown rc6.d/K08ifupdown
ln -s ../init.d/umountfs rc6.d/K09umountfs
ln -s ../init.d/umountroot rc6.d/K10umountroot
ln -s ../init.d/reboot rc6.d/K11reboot
ln -s ../init.d/mountkernfs.sh rcS.d/S01mountkernfs.sh
ln -s ../init.d/udev rcS.d/S02udev
ln -s ../init.d/mountdevsubfs.sh rcS.d/S03mountdevsubfs.sh
ln -s ../init.d/bootlogd rcS.d/S04bootlogd
ln -s ../init.d/keyboard-setup rcS.d/S05keyboard-setup
ln -s ../init.d/hdparm rcS.d/S06hdparm
ln -s ../init.d/hostname.sh rcS.d/S06hostname.sh
ln -s ../init.d/hwclockfirst.sh rcS.d/S06hwclockfirst.sh
ln -s ../init.d/checkroot.sh rcS.d/S07checkroot.sh
ln -s ../init.d/hwclock.sh rcS.d/S08hwclock.sh
ln -s ../init.d/ifupdown-clean rcS.d/S08ifupdown-clean
ln -s ../init.d/module-init-tools rcS.d/S08module-init-tools
ln -s ../init.d/mtab.sh rcS.d/S08mtab.sh
ln -s ../init.d/checkfs.sh rcS.d/S09checkfs.sh
ln -s ../init.d/ifupdown rcS.d/S10ifupdown
ln -s ../init.d/mountall.sh rcS.d/S10mountall.sh
ln -s ../init.d/mountall-bootclean.sh rcS.d/S11mountall-bootclean.sh
ln -s ../init.d/mountoverflowtmp rcS.d/S12mountoverflowtmp
ln -s ../init.d/networking rcS.d/S13networking
ln -s ../init.d/pppd-dns rcS.d/S13pppd-dns
ln -s ../init.d/procps rcS.d/S13procps
ln -s ../init.d/udev-mtab rcS.d/S13udev-mtab
ln -s ../init.d/x11-common rcS.d/S13x11-common
ln -s ../init.d/portmap rcS.d/S14portmap
ln -s ../init.d/nfs-common rcS.d/S15nfs-common
ln -s ../init.d/mountnfs.sh rcS.d/S16mountnfs.sh
ln -s ../init.d/mountnfs-bootclean.sh rcS.d/S17mountnfs-bootclean.sh
ln -s ../init.d/kbd rcS.d/S18kbd
ln -s ../init.d/console-setup rcS.d/S19console-setup
ln -s ../init.d/bootmisc.sh rcS.d/S20bootmisc.sh
ln -s ../init.d/fuse rcS.d/S20fuse
ln -s ../init.d/urandom rcS.d/S20urandom
ln -s ../init.d/stop-bootlogd-single rcS.d/S21stop-bootlogd-single
list_rclinks
