>
> > (4) Now that X runs successfully, will OpenGL compile under the hurd?
>
I tried to compile OpenGL (Mesa-3.2.1) and it works.I removed
only one "#undef SHM" in
Mesa-3.2.1/conf.h.in and compiled with ./configure and make. It is also
possible to compile
without removing of SHM defin
Thank you. I got rid of nasty error message "invalid input method"
after editing of Keyboard Section of XF86Config as you pointed.
My xterm binary is working (from XFree site).
http://www.uni-bonn.de/~uzstds/xterm
I use blackbox as windows manager and tkdesk as file manager
(tkdesk_1.2.orig.tar.
"Jack J. Woehr" wrote:
>
> I would like to rebuild gnumach, building on my Linux box.
>
> But configure says
> checking host system type... i586-pc-linux-gnu
> configure: error: sorry, this is the gnu os, not linux-gnu
>
> I've seen on this list that I should be able to cross-compile
>
OKUJI Yoshinori wrote:
>
>
> Yes. So I said, "replace it with the current one".
>
Network is working.Thank you for help.
I tried to add the driver (--enable-3c59x or --enable-vortex for Donald
Becker's driver and --enable-3c90x or --enable-bc90x for the new 3Com
driver (support Tornado,Cyclo
Is any documentation about compiling of GNUmach available?
Thank you.
Michail
OKUJI Yoshinori wrote:
>
> From: "Issakov M." <[EMAIL PROTECTED]>
> Subject: Problems with 3Com905C-TX
> Date: Mon, 24 Jan 2000 23:16:51 +
>
> > Hurd anyway to internet over the network. The sources of the driver are
> > available. May
Sorry the link seems not to work (html instead of htm doesn't work ?),
this is the rignt one
http://support.3com.com/infodeli/tools/nic/linux.htm
I connected two PCs with 100Mbts Ethernet, both has 3Com905C-TX Fast
Etherlink XL NICs. One PC has FreeBSD only and the other Linux and Hurd
Partitions. Not so simple as it looks. Linux could not find the NIC. I
compiled David Becker's
driver , but it didn't worked( Ethernet controller : 3Com Un
Michael Thaler wrote:
>
> I think it's a problem with the translators and I downloaded the patch
> hurd-xfree86.patch. But how can I install this patch on the HURD?
> There's a patchls command which lists the contents of the patchfile,
> bur no patch-command. I did not find a packet patch. I trie
>
> Michael Thaler wrote:
> >
> > Hello!
> >
> > I tried to install X on the HURD. I downloaded
> >
> > ftp://alpha.gnu.org/gnu/hurd/contrib/XFree/X3323-Hurd.tar.gz
There are the newer binaries at
ftp://ftp.xfree86.org/pub/XFree86/3.3.3.1/binaries/Hurd .
Look also at http://f77.nop.or.jp/doc/
"Issakov M." wrote:
>
> Chris Lingard wrote:
>
> > Would like to try it, but where is it? It is not with the other tar balls.
> >
> > Chris
> ftp://ftp.debian.org/dists/unstable/binary-hurd-i386/main/base/hurd_19991209.deb
>
> --
> To UNSUBSCRIB
Chris Lingard wrote:
> Would like to try it, but where is it? It is not with the other tar balls.
>
> Chris
ftp://ftp.debian.org/dists/unstable/binary-hurd-i386/main/base/hurd_19991209.deb
I compiled xruskb,but if i switch to cyrillic i cann't type (7 bit?),
should i try to repair or is it impossible?
If open xterm from other xterm i become message:
Warning:locale not supported by Xlib,locale set to C
Warning:X locale modifiers not supported,using default
Issakov Michail wrote:
>
> After startx i see 3 windows :login and 2 xterms.Are these 2
> xterms ghosts of kbd and mouse?If i kill one them mouse translator
> dies.
Sorry ,it was wrong - i can now kill them.
14 matches
Mail list logo
