Maybe I missed it, but what's the deal with the new kernels (2.4.0xxx)
and shared memory? From top:
CPU states: 5.2% user, 1.8% system, 0.0% nice, 93.0% idle
Mem: 78592K av, 75848K used, 2744K free, 0K shrd, 1932K buff
Swap: 185464K av, 11520K used, 173944K free
Has anyone had any luck getting the lvm stuff to work?
Tim
--
><
>> Tim Sailer (at home) >< Coastal Internet, Inc. <<
>> Network and Systems Operations >< PO Box 671 <<
On Tue, Aug 29, 2000 at 10:08:53PM -0600, Art Sackett wrote:
> ('compact' is sporting a 2.2.14pre-something
Dump typo from a poorly-skilled keyboard operator. 2.2.17pre-something.
--
Art Sackett
On Thu, Aug 24, 2000 at 10:05:46PM +0100, Jonathan McDowell wrote:
>
> I had a machine with a 2940 lock up after a fair few SCSI bus resets. I
> compiled up the latest 2.2.17 pre release which has the latest driver in
> it and turned off tagged command queuing and haven't seen a problem
> since.
I
Check the Readme's with the Kernel source - there is actualy a device you
have to mount in your fstab file (you know, for bootup;) that enables
shared memory. It uses a "imaginary" mount point like /proc does.
However, as far as I know, "free" and friends don't show the shared memory
in use corr
Maybe I missed it, but what's the deal with the new kernels (2.4.0xxx)
and shared memory? From top:
CPU states: 5.2% user, 1.8% system, 0.0% nice, 93.0% idle
Mem: 78592K av, 75848K used, 2744K free, 0K shrd, 1932K buff
Swap: 185464K av, 11520K used, 173944K free
Has anyone had any luck getting the lvm stuff to work?
Tim
--
><
>> Tim Sailer (at home) >< Coastal Internet, Inc. <<
>> Network and Systems Operations >< PO Box 671 <
On Tue, Aug 29, 2000 at 10:08:53PM -0600, Art Sackett wrote:
> ('compact' is sporting a 2.2.14pre-something
Dump typo from a poorly-skilled keyboard operator. 2.2.17pre-something.
--
Art Sackett
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
On Thu, Aug 24, 2000 at 10:05:46PM +0100, Jonathan McDowell wrote:
>
> I had a machine with a 2940 lock up after a fair few SCSI bus resets. I
> compiled up the latest 2.2.17 pre release which has the latest driver in
> it and turned off tagged command queuing and haven't seen a problem
> since.
On Tue, Aug 29, 2000 at 04:36:23PM +0200, Dariush Pietrzak wrote:
> but, there are some commercial databases which keep their data directly
> on partitions ( this should be much better then any *fs including
> reiserfs) and the weird part is that that direct-partition instalation
> scheme seems to
Hello again,
Robert Davies wrote:
> Why wait?
>
> Run the command vmstat, and observe how much is paged in /out, what is the
> scan rate? That indicates how hard the page stealer is looking for pages it
> can free off. vmstat 10 is usually a goodish, number but if you can run it
> a long time,
Help: I am new to Debian and am unabel to get internet
applications running after connecting with wvdial??
Perhaps someone can advise me where I can enter my
ISP's DNS address? Any help will be gratly appeciated.
Jim Clawson
__
Do You Yahoo!?
Yahoo!
> Thanks for all the reponses. From most of the replies, can I gather that
> I'll have to observe my how much is being swapped to determine whether I
> should immediately "up" the RAM back to 128MB? (and pester the tight-wad
> suits who'll approve the requesition)
Why wait?
Run the command vmstat
Hello All,
Thanks for all the reponses. From most of the replies, can I gather that
I'll have to observe my how much is being swapped to determine whether I
should immediately "up" the RAM back to 128MB? (and pester the tight-wad
suits who'll approve the requesition)
To paint a better picture, h
On Tue, Aug 29, 2000 at 04:36:23PM +0200, Dariush Pietrzak wrote:
> but, there are some commercial databases which keep their data directly
> on partitions ( this should be much better then any *fs including
> reiserfs) and the weird part is that that direct-partition instalation
> scheme seems t
On Tue, 29 Aug 2000, Nathan wrote:
> Why not that cheap? Less than half of his ram is being used for actual
> needed data. The rest is either free, in cache or in buffers which means
> the memory isn't even close to being stressed on the system. The 3MB in
that's exactly what i'm talking ab
Not to mention that unless you are having MILD traffic through the squid
box, you probably want a box dedicated to just that.
On Tue, 29 Aug 2000, Bulent Murtezaoglu wrote:
|
| Your biggest potential hog is squid. It maintains data structures in
| memory and their size grows with your cache si
Hi:
does anyone know if the dfme network driver is available during a debian
2.2 install?
If so, dos it show up on the list of cards, and which hardare set should I
get for the following items:
I'll use a machine with udma66 drives,
and the dfme network onboard.
under RH Ihave to use insmod after
On Tue, 29 Aug 2000, Tamas TEVESZ wrote:
> On Wed, 30 Aug 2000, Erik Peter P. Abella wrote:
>
> > 70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
> > CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
> > Mem: 63124K av, 61296K used, 1828K free, 36880K shrd, 7712K bu
Erik, linux will always use almost 100% of the memory (unless you have a
BUTTLOAD of extra (ie. 512MB RAM)) for buffers and things like that.
For example:
skank:~# free
total used free sharedbuffers cached
Mem: 62956 61460 1496 15432
On Wed, 30 Aug 2000, Erik Peter P. Abella wrote:
> 70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
> CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
> Mem: 63124K av, 61296K used, 1828K free, 36880K shrd, 7712K buff
> Swap: 104380K av, 3128K used, 101252K free
Your biggest potential hog is squid. It maintains data structures in
memory and their size grows with your cache size. If anything causes
trashing that'll be it. The squid FAQ's give some back-of-envelope
calculations for this AFAIK.
cheers,
BM
Hello All,
I had problems with the RAM (128MB SDRAM DIMM) of my server and the only
spare I had was (64MB SDRAM DIMM).
Hear is what top says:
70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
Mem: 63124K av, 61296K used, 1
Hello again,
Robert Davies wrote:
> Why wait?
>
> Run the command vmstat, and observe how much is paged in /out, what is the
> scan rate? That indicates how hard the page stealer is looking for pages it
> can free off. vmstat 10 is usually a goodish, number but if you can run it
> a long time
Help: I am new to Debian and am unabel to get internet
applications running after connecting with wvdial??
Perhaps someone can advise me where I can enter my
ISP's DNS address? Any help will be gratly appeciated.
Jim Clawson
__
Do You Yahoo!?
Yahoo
> Thanks for all the reponses. From most of the replies, can I gather that
> I'll have to observe my how much is being swapped to determine whether I
> should immediately "up" the RAM back to 128MB? (and pester the tight-wad
> suits who'll approve the requesition)
Why wait?
Run the command vmsta
On Tue, 29.08.00 09:48 -0700, Kevin wrote:
> I've got my network on 10.0.0.0/24. The gateway is 10.0.0.1 and the
> bridge/router is on 10.0.0.1. I need to setup a static route in the
> gateway that says anything for 10.1.1.0/24 should use 10.0.0.1 as
> its next hop. From my view I can't
Hello All,
Thanks for all the reponses. From most of the replies, can I gather that
I'll have to observe my how much is being swapped to determine whether I
should immediately "up" the RAM back to 128MB? (and pester the tight-wad
suits who'll approve the requesition)
To paint a better picture,
On Tue, 29 Aug 2000, Nathan wrote:
> Why not that cheap? Less than half of his ram is being used for actual
> needed data. The rest is either free, in cache or in buffers which means
> the memory isn't even close to being stressed on the system. The 3MB in
that's exactly what i'm talking a
Not to mention that unless you are having MILD traffic through the squid
box, you probably want a box dedicated to just that.
On Tue, 29 Aug 2000, Bulent Murtezaoglu wrote:
|
| Your biggest potential hog is squid. It maintains data structures in
| memory and their size grows with your cache s
Hi:
does anyone know if the dfme network driver is available during a debian
2.2 install?
If so, dos it show up on the list of cards, and which hardare set should I
get for the following items:
I'll use a machine with udma66 drives,
and the dfme network onboard.
under RH Ihave to use insmod after
On Tue, 29 Aug 2000, Tamas TEVESZ wrote:
> On Wed, 30 Aug 2000, Erik Peter P. Abella wrote:
>
> > 70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
> > CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
> > Mem: 63124K av, 61296K used, 1828K free, 36880K shrd, 7712K b
Erik, linux will always use almost 100% of the memory (unless you have a
BUTTLOAD of extra (ie. 512MB RAM)) for buffers and things like that.
For example:
skank:~# free
total used free sharedbuffers cached
Mem: 62956 61460 1496 15432
On Wed, 30 Aug 2000, Erik Peter P. Abella wrote:
> 70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
> CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
> Mem: 63124K av, 61296K used, 1828K free, 36880K shrd, 7712K buff
> Swap: 104380K av, 3128K used, 101252K free
Your biggest potential hog is squid. It maintains data structures in
memory and their size grows with your cache size. If anything causes
trashing that'll be it. The squid FAQ's give some back-of-envelope
calculations for this AFAIK.
cheers,
BM
--
To UNSUBSCRIBE, email to [EMAIL PROT
Hello All,
I had problems with the RAM (128MB SDRAM DIMM) of my server and the only
spare I had was (64MB SDRAM DIMM).
Hear is what top says:
70 processes: 69 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: 0.1% user, 0.7% system, 0.0% nice, 99.0% idle
Mem: 63124K av, 61296K used,
I've got my network on 10.0.0.0/24. The gateway is 10.0.0.1 and the
bridge/router is on 10.0.0.1. I need to setup a static route in the
gateway that says anything for 10.1.1.0/24 should use 10.0.0.1 as
its next hop. From my view I can't do it with normal route as it
will only take an
On Tue, 29.08.00 09:48 -0700, Kevin wrote:
> I've got my network on 10.0.0.0/24. The gateway is 10.0.0.1 and the
> bridge/router is on 10.0.0.1. I need to setup a static route in the
> gateway that says anything for 10.1.1.0/24 should use 10.0.0.1 as
> its next hop. From my view I can't
There are lot of web search engines around, i mean like altavista's
google's infoseek's etc..
What does one do when she wants to build one herself.
I mean what do you people use when you build local search engine
( city, locality, my needs are about 100 000 pages?webs? for the
beggining).
I've be
AFAIK reiserfs is about keeping files (blocks) in b-trees,
and DBMS keep their data in a bunch of files, which are accessed directly
(non-sequential access).
So I figured that reiserfs would be great for keeping DBMS's data on it.
but, there are some commercial databases which keep their data dir
I've got my network on 10.0.0.0/24. The gateway is 10.0.0.1 and the
bridge/router is on 10.0.0.1. I need to setup a static route in the
gateway that says anything for 10.1.1.0/24 should use 10.0.0.1 as
its next hop. From my view I can't do it with normal route as it
will only take an
Hello,
I am having a little problem with ?x.509? certificates
and virtual domains, it seems like name (not ip) of host
is being put in certificate, so when I sign my cet as
host.net, then when someone connects to virtual.host.net
she gets 'hosts name differ from certificate' or sth error.
Same
There are lot of web search engines around, i mean like altavista's
google's infoseek's etc..
What does one do when she wants to build one herself.
I mean what do you people use when you build local search engine
( city, locality, my needs are about 100 000 pages?webs? for the
beggining).
I've b
AFAIK reiserfs is about keeping files (blocks) in b-trees,
and DBMS keep their data in a bunch of files, which are accessed directly
(non-sequential access).
So I figured that reiserfs would be great for keeping DBMS's data on it.
but, there are some commercial databases which keep their data di
Hello,
I am having a little problem with ?x.509? certificates
and virtual domains, it seems like name (not ip) of host
is being put in certificate, so when I sign my cet as
host.net, then when someone connects to virtual.host.net
she gets 'hosts name differ from certificate' or sth error.
Same
45 matches
Mail list logo
