Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-5
Severity: normal
Hi,
I tried upgrading my lenny box from 2.6.25 to 2.6.26 and it doesn't work
really well, especially from the network pov.
The box uses the r8169 module:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E
OK, got this far now.
udevd --daemon
is not executed because it cannot be found.
udevd is called from /scripts/init-premount/udev (line 17)
udevd is definitely present in the root of the temporary file system.
But it is called without leading '/'
Not sure whether that is the error.
Continue t
On Sunday 21 September 2008, Graham wrote:
> Hi again,
>
> If I'm not mistaken, the "/dev/disk/by-uuid" stuff is generated by
> udev, so check whether you have that installed.
>
> I believe that udev is optional, but on any normal system, it's
> probably desirable.
>
> -- graham
Yes, I do.
After
Hi again,
If I'm not mistaken, the "/dev/disk/by-uuid" stuff is generated by
udev, so check whether you have that installed.
I believe that udev is optional, but on any normal system, it's
probably desirable.
-- graham
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscr
Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Severity: important
Tags: upstream
Hi,
After updating my system from kernel version 2.6.24 to 2.6.26 I ran into
some problems due to my Seagate STT2A tapestreamer. Those problems
also occur in the vanilla kernel and have been reported upstr
Package: virtualbox-ose-modules-2.6.26-1-686
Followup-For: Bug #498381
this sounds like it might be similar to a recently closed bug in
fuse-utils:
#473545: fuse-utils: /dev/fuse belongs to group root after first-time-install
live well,
vagrant
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
If you use rootdelay, the bootskripts will wait every time, even if all
is complete or they will stop waiting, even, if on slow systems it isn't.
Without another solution (this for example copied from mountroot, which
had the same problem which was solved without additional work for the
users like
On Sun, Sep 21, 2008 at 02:18:37PM +0200, Ferenc Wagner wrote:
> Yesterday afternoon three out of our four Lenny virtual machines froze.
> The consoles went unresponsible, the buffers contained no interesting
> messages, the Munin graphs didn't show any anomaly before the freeze.
> According to dom
Package: linux-image-2.6.26-1-xen-686
Version: 2.6.26-4
Severity: normal
Hi,
Yesterday afternoon three out of our four Lenny virtual machines froze.
The consoles went unresponsible, the buffers contained no interesting
messages, the Munin graphs didn't show any anomaly before the freeze.
Accordin
There's something wrong with one of the drivers:
On 2008-09-21 19:31:45 +0200, Vincent Lefevre wrote:
> I've tried with another 1-GB card, a microSD this time (with a microSD
> to SD adapter between the PCMCIA adapter and the memory card), and I get
> the following errors:
[...]
> Sep 21 19:18:11
On 2008-09-21 16:11:45 +0200, Bastian Blank wrote:
> On Fri, Sep 19, 2008 at 10:07:36PM +0200, Vincent Lefevre wrote:
> > Same problem on my PowerBook G4, with both a 2-GB SD card and a 1-GB SD
> > card. The 1-GB card reads fine on my Zaurus (2.4.18 Linux kernel). For
> > instance, with the 2-GB ca
FYI: The status of the linux-2.6 source package
in Debian's testing distribution has changed.
Previous version: 2.6.26-4
Current version: 2.6.26-5
--
This email is automatically generated; the Debian Release Team
<[EMAIL PROTECTED]> is responsible.
See http://release.debian.org/testing-watc
Hi folks
I intend to move the 686-bigmem 2.6.26 image to generic arch (+ NUMA).
This supports machines with more than 8 cpus and some other special
types. No abi changes.
Bastian
--
Our way is peace.
-- Septimus, the Son Worshiper, "Bread and Circuses",
starda
Hello Maximilian,
I'm not quite happy with your downgrade of #499198 to important since
this (together with #499046 and #498328) is a clear regretion from
2.6.25 and caused my data loss (hence it qualifies for severity
grave).
I'm on
$ uname -a
Linux zion 2.6.25-2-amd64 #1 SMP Mon Jul 14 11:05:23
On Fri, Sep 19, 2008 at 10:07:36PM +0200, Vincent Lefevre wrote:
> Same problem on my PowerBook G4, with both a 2-GB SD card and a 1-GB SD
> card. The 1-GB card reads fine on my Zaurus (2.4.18 Linux kernel). For
> instance, with the 2-GB card:
Are you sure that this cards are okay?
> Sep 19 20:37
On Mon, Sep 01, 2008 at 02:22:00PM +0200, Bastien Durel wrote:
> The e1000e kernel module does not initialize correctly, then the network
> cannot initialize.
Please explain, the attached log does not show strange e1000 related
messages.
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82
Your message dated Sun, 21 Sep 2008 15:15:15 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is
read only device.
has caused the Debian Bug report #497932,
regarding linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only devic
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.26
> tags 470528 + pending
Bug#470528: linux-image-2.6.24-1-686: Suspend-to-RAM fails on HP nc4200
notebook due to unset CONFIG_BLK_DEV_IDEACPI
Tags were: patch
Tags added: pending
>
End
Solved!
New kernel (linux-image-2.6.26-1-amd64_2.6.26-5_amd64.deb) and all works
fine again.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Your message dated Sun, 21 Sep 2008 14:43:52 +0200
with message-id <[EMAIL PROTECTED]>
and subject line not applicable to newer kernels
has caused the Debian Bug report #406477,
regarding linux-doc-2.6.18: Kernel oopses on xen-amd64 SMP while dealing with
LVM snapshots
to be marked as done.
This
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.26
> tags 428460 moreinfo
Bug#428460: linux-image-2.6.18-4-686: kernel panic in ip_conntrack. Not
repeated yet.
There were no tags set.
Tags added: moreinfo
>
End of message, stopping pr
Your message dated Sun, 21 Sep 2008 14:27:46 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#499378: linux-image on lenny hangs when running in
vmware-instance
has caused the Debian Bug report #499378,
regarding linux-image on lenny hangs when running in vmware-instance
to be m
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.26
> tags 497971 + pending
Bug#497971: linux-image-2.6.26-1-686: iwl3945 : Channels 12 and 13 unavailable.
There were no tags set.
Tags added: pending
>
End of message, stopping processin
Processing commands for [EMAIL PROTECTED]:
> reassign 499697 grub
Bug#499697: linux-image-2.6.26-1-486: install problem for AMD Geode CPU
Bug reassigned from package `linux-image-2.6.26-1-486' to `grub'.
> thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tra
reassign 499697 grub
thanks
On Sun, Sep 21, 2008 at 03:03:53PM +0300, acemi list wrote:
> Running postinst hook script update-grub.
> Searching for GRUB installation directory ... found: /boot/grub
> User postinst hook script [update-grub] exited with value 1
This a script provided by grub.
This
Package: linux-image-2.6.26-1-486
Version: 2.6.26-5
My system is Debian Lenny with linux-image-2.6.26-1-486, libc6 2.7-13.
This is an embedded board with AMD Geode CPU.
When I try to upgrade my running system today, dpkg gives error for
linux-image-2.6.26-1-486 package
-
Hi folks
One of the following modules have to go, both claims the same hardware:
- snd-pcsp
- pcspkr
Bastian
--
Each kiss is as the first.
-- Miramanee, Kirk's wife, "The Paradise Syndrome",
stardate 4842.6
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
2008/9/20 Vincent Danjean <[EMAIL PROTECTED]>:
> Hi,
>
> I talk about this bug with Samuel Thibault (involved in braille
> support). His internet connection is not good for now but he think
> it can be related to http://bugzilla.kernel.org/show_bug.cgi?id=11242
> Perhaps the proposed patch can al
I can confirm the original bug report: On most boots with kernel 2.6.26-1-686
sound does not work (There is no problem with kernel 2.6.25-2-686). The update
to the latest alsa-base and alsa-utils does not help.
cat /proc/asound/modules
0 snd_pcsp
1 snd_intel8x0
dmesg | grep pcsp
[ 11.486427]
Package: initramfs-tools
Version: 0.92j
Severity: wishlist
Tags: patch
hi,
i've set up an encrypted loop-AES device as the root partition (boot
paramter dev=/dev/loopX) and update-initramfs fails with :
mkinitramfs: missing loop root /dev/loop2 /sys entry
mkinitramfs: workaround is MODULES=most
m
30 matches
Mail list logo
