Package: src:linux
Version: 4.5.4-1~bpo8+1
Severity: normal

Dear Maintainer,

I try linux-image-4.5.0-0.bpo.2-armmp and
linux-image-4.5.0-0.bpo.2-armmp-lpae on LeMaker Banana Pi,
unfortunately the GMAC won't work in this kernel, i get this error:

[  117.215251] libphy: PHY stmmac-0:ffffffff not found
[  117.220186] eth0: Could not attach to PHY
[  117.224234] stmmac_open: Cannot attach to PHY (error: -19)

As stated below.

Kernel 3.16.0-4-armmp-lpae work

Thanks.

-- Package-specific info:
** Version:
Linux version 4.5.0-0.bpo.2-armmp (debian-kernel@lists.debian.org) (gcc
version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.5.4-1~bpo8+1 (2016-05-13)

** Command line:
console=ttyS0,115200 quiet

** Tainted: E (8192)
 * Unsigned module has been loaded (currently expected).

** Kernel log:
[    5.710063] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.710077] usb usb2: Product: EHCI Host Controller
[    5.710087] usb usb2: Manufacturer: Linux 4.5.0-0.bpo.2-armmp ehci_hcd
[    5.710097] usb usb2: SerialNumber: 1c1c000.usb
[    5.716250] hub 2-0:1.0: USB hub found
[    5.716383] hub 2-0:1.0: 1 port detected
[    5.720303] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    5.720369] ohci-platform 1c14400.usb: new USB bus registered,
assigned bus number 3
[    5.722269] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400
[    5.781753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.781779] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.781790] usb usb3: Product: Generic Platform OHCI controller
[    5.781800] usb usb3: Manufacturer: Linux 4.5.0-0.bpo.2-armmp ohci_hcd
[    5.781809] usb usb3: SerialNumber: 1c14400.usb
[    5.782916] hub 3-0:1.0: USB hub found
[    5.784614] hub 3-0:1.0: 1 port detected
[    5.789951] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    5.790051] ohci-platform 1c1c400.usb: new USB bus registered,
assigned bus number 4
[    5.790530] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400
[    5.849758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.849784] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    5.849795] usb usb4: Product: Generic Platform OHCI controller
[    5.849805] usb usb4: Manufacturer: Linux 4.5.0-0.bpo.2-armmp ohci_hcd
[    5.849814] usb usb4: SerialNumber: 1c1c400.usb
[    5.852841] hub 4-0:1.0: USB hub found
[    5.852950] hub 4-0:1.0: 1 port detected
[    5.878571] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[    5.983763] systemd-journald[149]: Received request to flush runtime
journal from PID 1
[    5.985586] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[    6.122001] usb 1-1: New USB device found, idVendor=04e8, idProduct=6860
[    6.122030] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    6.122040] usb 1-1: Product: SAMSUNG_Android
[    6.122050] usb 1-1: Manufacturer: SAMSUNG
[    6.122059] usb 1-1: SerialNumber: 474e650b
[    6.363290] libphy: PHY stmmac-0:ffffffff not found
[    6.368290] eth0: Could not attach to PHY
[    6.372341] stmmac_open: Cannot attach to PHY (error: -19)
[    6.683068] libphy: PHY stmmac-0:ffffffff not found
[    6.688077] eth0: Could not attach to PHY
[    6.692153] stmmac_open: Cannot attach to PHY (error: -19)
[    7.059096] RPC: Registered named UNIX socket transport module.
[    7.059124] RPC: Registered udp transport module.
[    7.059131] RPC: Registered tcp transport module.
[    7.059138] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.084946] FS-Cache: Loaded
[    7.133567] FS-Cache: Netfs 'nfs' registered for caching
[    7.190755] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   10.004853] random: nonblocking pool is initialized
[   41.993906] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[   46.434225] libphy: PHY stmmac-0:ffffffff not found
[   46.439223] eth0: Could not attach to PHY
[   46.443281] stmmac_open: Cannot attach to PHY (error: -19)
[ 1053.081987] libphy: PHY stmmac-0:ffffffff not found
[ 1053.086938] eth0: Could not attach to PHY
[ 1053.090993] stmmac_open: Cannot attach to PHY (error: -19)
[ 1061.144311] libphy: PHY stmmac-0:ffffffff not found
[ 1061.149277] eth0: Could not attach to PHY
[ 1061.153330] stmmac_open: Cannot attach to PHY (error: -19)
[ 1065.242647] libphy: PHY stmmac-0:ffffffff not found
[ 1065.247611] eth0: Could not attach to PHY
[ 1065.251680] stmmac_open: Cannot attach to PHY (error: -19)
[ 1073.300570] libphy: PHY stmmac-0:ffffffff not found
[ 1073.305573] eth0: Could not attach to PHY
[ 1073.309660] stmmac_open: Cannot attach to PHY (error: -19)
[ 1077.401114] libphy: PHY stmmac-0:ffffffff not found
[ 1077.406104] eth0: Could not attach to PHY
[ 1077.410170] stmmac_open: Cannot attach to PHY (error: -19)
[ 1085.459834] libphy: PHY stmmac-0:ffffffff not found
[ 1085.464835] eth0: Could not attach to PHY
[ 1085.468925] stmmac_open: Cannot attach to PHY (error: -19)
[ 1089.557363] libphy: PHY stmmac-0:ffffffff not found
[ 1089.562351] eth0: Could not attach to PHY
[ 1089.566405] stmmac_open: Cannot attach to PHY (error: -19)
[ 1097.616476] libphy: PHY stmmac-0:ffffffff not found
[ 1097.621469] eth0: Could not attach to PHY
[ 1097.625555] stmmac_open: Cannot attach to PHY (error: -19)
[ 1180.677298] libphy: PHY stmmac-0:ffffffff not found
[ 1180.682286] eth0: Could not attach to PHY
[ 1180.686345] stmmac_open: Cannot attach to PHY (error: -19)
[ 1188.737316] libphy: PHY stmmac-0:ffffffff not found
[ 1188.742321] eth0: Could not attach to PHY
[ 1188.746411] stmmac_open: Cannot attach to PHY (error: -19)
[ 1192.852958] libphy: PHY stmmac-0:ffffffff not found
[ 1192.857997] eth0: Could not attach to PHY
[ 1192.862085] stmmac_open: Cannot attach to PHY (error: -19)
[ 1200.912037] libphy: PHY stmmac-0:ffffffff not found
[ 1200.917018] eth0: Could not attach to PHY
[ 1200.921079] stmmac_open: Cannot attach to PHY (error: -19)
[ 1205.015978] libphy: PHY stmmac-0:ffffffff not found
[ 1205.020937] eth0: Could not attach to PHY
[ 1205.024995] stmmac_open: Cannot attach to PHY (error: -19)
[ 1213.727349] libphy: PHY stmmac-0:ffffffff not found
[ 1213.732326] eth0: Could not attach to PHY
[ 1213.736376] stmmac_open: Cannot attach to PHY (error: -19)
[ 1217.842312] libphy: PHY stmmac-0:ffffffff not found
[ 1217.847729] eth0: Could not attach to PHY
[ 1217.857406] stmmac_open: Cannot attach to PHY (error: -19)
[ 1225.915293] libphy: PHY stmmac-0:ffffffff not found
[ 1225.920268] eth0: Could not attach to PHY
[ 1225.924324] stmmac_open: Cannot attach to PHY (error: -19)

** Model information
Hardware    : Allwinner sun7i (A20) Family
Revision    : 0000
Device Tree model: LeMaker Banana Pi

** Loaded modules:
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
fscache(E)
sunrpc(E)
evdev(E)
axp20x_pek(E)
axp20x_usb_power(E)
axp20x_regulator(E)
sun4i_codec(E)
snd_soc_core(E)
i2c_mv64xxx(E)
snd_pcm_dmaengine(E)
snd_pcm(E)
sun4i_ts(E)
snd_timer(E)
snd(E)
soundcore(E)
ohci_platform(E)
ohci_hcd(E)
ehci_platform(E)
ehci_hcd(E)
sun4i_ss(E)
sunxi_wdt(E)
usbcore(E)
usb_common(E)
des_generic(E)
spi_sun4i(E)
cpufreq_dt(E)
leds_gpio(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
sg(E)
sd_mod(E)
ahci_sunxi(E)
libahci_platform(E)
libahci(E)
dwmac_sunxi(E)
stmmac_platform(E)
stmmac(E)
libata(E)
scsi_mod(E)
phy_sun4i_usb(E)
extcon(E)
sunxi_mmc(E)

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 02:97:04:c0:f1:82 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed
multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:  349200    5820    0    0    0     0          0         0  
349200    5820    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0       
0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    2910 total packets received
    0 forwarded
    0 incoming packets discarded
    2910 incoming packets delivered
    2910 requests sent out
    2 dropped because of missing route
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    2910 active connections openings
    0 passive connection openings
    2910 failed connection attempts
    0 connection resets received
    0 connections established
    5820 segments received
    5820 segments send out
    0 segments retransmited
    0 bad segments received.
    2910 resets sent
Udp:
    0 packets received
    0 packets to unknown port received.
    0 packet receive errors
    0 packets sent
UdpLite:
TcpExt:
    0 packet headers predicted
IpExt:
    InOctets: 145500
    OutOctets: 145500
    InNoECTPkts: 2910


** PCI devices:

** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100
Phone [Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab
10.1]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armhf (armv7l)

Kernel: Linux 4.5.0-0.bpo.2-armmp (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.5.0-0.bpo.2-armmp depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120+deb8u2
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-4.5.0-0.bpo.2-armmp recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-4.5.0-0.bpo.2-armmp suggests:
pn  debian-kernel-handbook  <none>
pn  fdutils                 <none>
pn  linux-doc-4.5           <none>

Versions of packages linux-image-4.5.0-0.bpo.2-armmp is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- debconf information:
 
linux-image-4.5.0-0.bpo.2-armmp/prerm/removing-running-kernel-4.5.0-0.bpo.2-armmp:
true

Reply via email to