Package: src:linux
Version: 3.11-1~exp1
Severity: important
Tags: upstream

The module Ath9k stop working, and dmesg display "DMA failed to stop" in the 
output


Also sometimes the Interupt 17 is disabled.

Often a kernel panic at startup occurs.
When the module stop working, there are often system freezes.

This bug occurs randomly in a non-deterministic way.

If the module is removed via modprobe, cannot be reinserted, because module is 
unable to reset the hardware

nohwcript and disable power saving workarounds doesn't work.

(options ath9k nohwcrypt=1)
(iwconfig wlan0 power off)

This bug occurs with the same network card with all (ot at least most) of the 
kernels between 3.2.42 and the current kernel from experimental

here there is a bug report of the kernel where i've posted some informations:

https://bugzilla.kernel.org/show_bug.cgi?id=42673 


this issue causes the ath9k driver to be nearly unusable for me.


the network card is a 04:00.0 Qualcomm Atheros AR9283 Wireless Network Adapter 
(PCI-Express) [168c:002a] (rev 01)

-- dmesg output

[  352.239012] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  352.239027] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.311480] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.324667] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  352.324679] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.395519] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.408695] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  352.408710] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.479554] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.492765] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  352.492779] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.563579] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.576804] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  352.576817] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.647660] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.660856] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  352.660869] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.731632] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.744886] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  352.744900] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.815623] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.828916] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  352.828928] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.899584] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.912711] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  352.912720] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  352.983565] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  352.996725] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  352.996736] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  353.067545] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  353.080646] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  353.080654] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  353.151635] ath: phy0: Failed to stop TX DMA, queues=0x001!
[  353.164880] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
[  353.164895] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[  353.292813] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[  353.292829] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up




-- Package-specific info:
** Version:
Linux version 3.11-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 
4.8.1 (Debian 4.8.1-9) ) #1 SMP Debian 3.11-1~exp1 (2013-09-12)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-trunk-amd64 
root=UUID=66de0752-8279-4d5f-bdad-d001faf65ac9 ro acpi_osi=Linux quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[   16.170565] vboxdrv: Successfully loaded version 4.2.16_Debian (interface 
0x001a0005).
[   16.322239] vboxpci: IOMMU not found (not registered)
[   17.243902] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input14
[   20.081984] Bluetooth: Core ver 2.16
[   20.082006] NET: Registered protocol family 31
[   20.082008] Bluetooth: HCI device and connection manager initialized
[   20.082021] Bluetooth: HCI socket layer initialized
[   20.082024] Bluetooth: L2CAP socket layer initialized
[   20.082030] Bluetooth: SCO socket layer initialized
[   20.100949] Bluetooth: RFCOMM TTY layer initialized
[   20.100976] Bluetooth: RFCOMM socket layer initialized
[   20.100978] Bluetooth: RFCOMM ver 1.11
[   20.177625] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.177630] Bluetooth: BNEP filters: protocol multicast
[   20.177643] Bluetooth: BNEP socket layer initialized
[   20.562702] lp: driver loaded but no devices found
[   20.786490] ppdev: user-space parallel port driver
[   22.814718] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[   22.832927] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.862946] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   56.079067] wlan0: authenticate with 00:23:8e:55:8e:cc
[   56.110123] wlan0: send auth to 00:23:8e:55:8e:cc (try 1/3)
[   56.112124] wlan0: authenticated
[   56.112405] ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   56.114347] wlan0: associate with 00:23:8e:55:8e:cc (try 1/3)
[   56.117220] wlan0: RX AssocResp from 00:23:8e:55:8e:cc (capab=0x411 status=0 
aid=3)
[   56.117517] wlan0: associated
[   56.117530] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  492.389800] perf samples too long (2684> 2500), lowering 
kernel.perf_event_max_sample_rate to 50000
[ 1213.813253] wlan0: deauthenticating from 00:23:8e:55:8e:cc by local choice 
(reason=3)
[ 1213.817813] cfg80211: Calling CRDA to update world regulatory domain
[ 1214.255849] cfg80211: World regulatory domain updated:
[ 1214.255854] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[ 1214.255858] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[ 1214.255861] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[ 1214.255863] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 
2000 mBm)
[ 1214.255866] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[ 1214.255868] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[ 1217.713871] PM: Syncing filesystems ... done.
[ 1218.414798] PM: Preparing system for mem sleep
[ 1218.414968] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1218.416231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) 
done.
[ 1218.417302] PM: Entering mem sleep
[ 1218.417366] Suspending console(s) (use no_console_suspend to debug)
[ 1218.417611] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1218.417784] sd 0:0:0:0: [sda] Stopping disk
[ 1218.482968] mei_me 0000:00:16.0: suspend
[ 1219.022919] PM: suspend of devices complete after 605.288 msecs
[ 1219.023050] PM: late suspend of devices complete after 0.127 msecs
[ 1219.038821] atl1c 0000:02:00.0: System wakeup enabled by ACPI
[ 1219.054900] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1219.070867] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1219.102806] PM: noirq suspend of devices complete after 79.736 msecs
[ 1219.102947] ACPI: Preparing to enter system sleep state S3
[ 1219.363042] PM: Saving platform NVS memory
[ 1219.363640] Disabling non-boot CPUs ...
[ 1219.466868] smpboot: CPU 1 is now offline
[ 1219.570883] smpboot: CPU 2 is now offline
[ 1219.674952] smpboot: CPU 3 is now offline
[ 1219.676247] ACPI: Low-level resume complete
[ 1219.676292] PM: Restoring platform NVS memory
[ 1219.676848] Enabling non-boot CPUs ...
[ 1219.676973] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 1219.690522] CPU1 is up
[ 1219.690613] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1219.704197] CPU2 is up
[ 1219.704301] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 1219.717903] CPU3 is up
[ 1219.722625] ACPI: Waking up from system sleep state S3
[ 1220.504408] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1220.536407] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1220.584516] PM: noirq resume of devices complete after 128.081 msecs
[ 1220.584651] PM: early resume of devices complete after 0.110 msecs
[ 1220.584675] i915 0000:00:02.0: setting latency timer to 64
[ 1220.584866] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1220.584928] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[ 1220.584977] pci 0000:00:1e.0: setting latency timer to 64
[ 1220.584990] ahci 0000:00:1f.2: setting latency timer to 64
[ 1220.585047] atl1c 0000:02:00.0: System wakeup disabled by ACPI
[ 1221.100819] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 1221.100898] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1221.312768] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[ 1222.528836] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1222.716853] ata1.00: configured for UDMA/133
[ 1222.732983] sd 0:0:0:0: [sda] Starting disk
[ 1224.474272] PM: resume of devices complete after 3888.733 msecs
[ 1224.474440] PM: Finishing wakeup.
[ 1224.474441] Restarting tasks ... done.
[ 1224.476439] video LNXVIDEO:01: Restoring backlight state
[ 1227.759601] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1227.775824] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1227.828569] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1232.556259] wlan0: authenticate with 00:23:8e:55:8e:cc
[ 1232.577384] wlan0: send auth to 00:23:8e:55:8e:cc (try 1/3)
[ 1232.579339] wlan0: authenticated
[ 1232.579576] ath9k 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1232.583141] wlan0: associate with 00:23:8e:55:8e:cc (try 1/3)
[ 1232.585956] wlan0: RX AssocResp from 00:23:8e:55:8e:cc (capab=0x411 status=0 
aid=3)
[ 1232.586245] wlan0: associated
[ 1232.586258] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

** Model information
sys_vendor: Acer           
product_name: Aspire 3820                    
product_version: V1.13          
chassis_vendor: Acer           
chassis_version: V1.13          
bios_vendor: Phoenix Technologies LTD
bios_version: V1.13          
board_vendor: Acer           
board_name: Aspire 3820                    
board_version: V1.13          

** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
joydev
arc4
snd_hda_codec_hdmi
coretemp
kvm_intel
ath9k
ath9k_common
kvm
ath9k_hw
snd_hda_codec_realtek
crc32c_intel
acer_wmi
sparse_keymap
microcode
i915
snd_hda_intel
ath
snd_hda_codec
drm_kms_helper
mac80211
drm
snd_hwdep
iTCO_wdt
iTCO_vendor_support
wmi
evdev
psmouse
pcspkr
serio_raw
snd_pcm
battery
ac
i2c_i801
i2c_algo_bit
i2c_core
lpc_ich
acpi_cpufreq
video
mperf
processor
button
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
snd
mei_me
intel_ips
mfd_core
cfg80211
rfkill
soundcore
mei
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
ahci
libahci
libata
ehci_pci
ehci_hcd
scsi_mod
atl1c
usbcore
usb_common
thermal
thermal_sys

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state 
DOWN group default qlen 1000
    link/ether 00:26:2d:99:01:7a brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group 
default qlen 1000
    link/ether 78:e4:00:bc:a7:e5 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.100/24 brd 192.168.1.255 scope global wlan0
       valid_lft forever preferred_lft forever
    inet6 fe80::7ae4:ff:febc:a7e5/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
  eth0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
    lo:   29533     482    0    0    0     0          0         0    29533     
482    0    0    0     0       0          0
 wlan0: 230432607  155384    0    0    0     0          0         0  7509662   
83600    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    155210 total packets received
    0 forwarded
    0 incoming packets discarded
    155160 incoming packets delivered
    83701 requests sent out
    1 dropped because of missing route
Icmp:
    43 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 41
        echo requests: 2
    48 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 46
        echo replies: 2
IcmpMsg:
        InType3: 41
        InType8: 2
        OutType0: 2
        OutType3: 46
Tcp:
    110 active connections openings
    20 passive connection openings
    26 failed connection attempts
    15 connection resets received
    1 connections established
    154378 segments received
    82973 segments send out
    6 segments retransmited
    4 bad segments received.
    45 resets sent
Udp:
    694 packets received
    46 packets to unknown port received.
    0 packet receive errors
    689 packets sent
UdpLite:
TcpExt:
    51 TCP sockets finished time wait in fast timer
    376 delayed acks sent
    Quick ack mode was activated 24 times
    144443 packet headers predicted
    256 acknowledgments not containing data payload received
    134 predicted acknowledgments
    6 congestion windows recovered without slow start after partial ack
    6 other TCP timeouts
    TCPLossProbes: 21
    TCPLossProbeRecovery: 12
    24 DSACKs sent for old packets
    20 DSACKs received
    1 connections reset due to unexpected data
    15 connections reset due to early user close
    TCPDSACKIgnoredNoUndo: 9
    TCPSackShiftFallback: 1
    TCPRcvCoalesce: 14400
    TCPOFOQueue: 7534
    TCPChallengeACK: 4
    TCPSYNChallenge: 4
IpExt:
    InNoRoutes: 4
    InMcastPkts: 158
    OutMcastPkts: 147
    InBcastPkts: 212
    OutBcastPkts: 138
    InOctets: 228254210
    OutOctets: 4654449
    InMcastOctets: 32693
    OutMcastOctets: 29732
    InBcastOctets: 30705
    OutBcastOctets: 20838


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller 
[8086:0044] (rev 12)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort+>SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor 
Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA 
controller])
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 1800 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series 
Chipset HECI Controller [8086:3b64] (rev 06)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 41
        Region 0: Memory at f0804000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort->SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0806000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset 
High Definition Audio [8086:3b56] (rev 05)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at f0800000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f0400000-f04fffff
        Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f0500000-f05fffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort->SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f0807000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC 
Interface Controller [8086:3b09] (rev 05)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort->SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 
4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort->SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 40
        Region 0: I/O ports at 1818 [size=8]
        Region 1: I/O ports at 180c [size=4]
        Region 2: I/O ports at 1810 [size=8]
        Region 3: I/O ports at 1808 [size=4]
        Region 4: I/O ports at 1820 [size=32]
        Region 5: Memory at f0808000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus 
Controller [8086:3b30] (rev 05)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- 
<TAbort- <MAbort->SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f0809000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1840 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 
Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f080a000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: intel ips

02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v1.0 Gigabit 
Ethernet [1969:1073] (rev c0)
        Subsystem: Acer Incorporated [ALI] Device [1025:0364]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c

04:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network 
Adapter (PCI-Express) [168c:002a] (rev 01)
        Subsystem: Foxconn International, Inc. T77H047.31 802.11bgn Wireless 
Half-size Mini PCIe Card [AR9283] [105b:e01f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k

ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0

ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture System Address Decoder [8086:2d01] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0

ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 
[8086:2d10] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0

ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 
[8086:2d11] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0

ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d12] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0

ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d13] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort- <TAbort- 
<MAbort->SERR- <PERR- INTx-
        Latency: 0


** USB devices:
Bus 002 Device 003: ID 04f2:b1d8 Chicony Electronics Co., Ltd 
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (650, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.11-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.11-trunk-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.51
ii  initramfs-tools [linux-initramfs-tool]  0.114
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.11-trunk-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.11-trunk-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.11          <none>

Versions of packages linux-image-3.11-trunk-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.40
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.40
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.11-trunk-amd64/postinst/depmod-error-initrd-3.11-trunk-amd64: 
false
  linux-image-3.11-trunk-amd64/prerm/removing-running-kernel-3.11-trunk-amd64: 
true                                       

--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/dub116-w20679217d83b953b2f7b86f8...@phx.gbl

Reply via email to