Package: firmware-atheros Version: 20190114-2 Followup-For: Bug #885846 Dear Maintainer,
I am seeing a similar crash as reported in bug 885846, using wireless driver ATH9k with a TP-Link TL-WN851ND. The system freezes during moderate to high wifi activity, such as streaming or running speedtest utilities, and is very repeatable. At best, the system requires a hard reset. At worst, the crash corrupts the BIOS, forcing BIOS reconfiguration. This issue affects distros that use kernels common to Ubuntu 20.04, Mint 20/LMDE, etc. It does not occur with older distros (e.g. Mint 17, Ubuntu 18.04 and its derivatives), or with Windows. Using modprobe I attempted to replace the ATH driver package provided with Mint LMDE/Ubuntu 20 with that from Mint 17, however the older driver package is apparently incompatible with the new kernel(s) and failed to load. I also attempted to replace the ATH9k driver with ndiswrapper and the 64 bit driver provided in Windows XP, but modprobe would hang when attempting to load ndiswrapper. I also disabled wireless N in both the adapter settings, and the router itself, to slow the data rate (i.e. I ran the adapter in "Legacy" mode). The system still crashes; it just takes a while longer. Likewise, the crash occurs whether security is enabled or disabled, and does not appear related to any other hardware conflicts (the crash occurs whether using Nouveau or Nvidia drivers, plus the wireless adapter is only device installed in a PCI slot). -- System Information: Debian Release: 10.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-10-amd64 (SMP w/6 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled firmware-atheros depends on no packages. firmware-atheros recommends no packages. Versions of packages firmware-atheros suggests: ii initramfs-tools 0.133+deb10u1 -- no debconf information *** /mnt/Storage/common files/ath9k/ath9k wireless driver crashing Mint 20 et al.txt Problem: The ath9k wireless adapter driver appears to be "broken". Affects Mint 20 Cinnamon & LMDE, Ubuntu & Xubuntu 20.04.0 &.1 (I believe they all use the latest kernels). It is NOT "broken" when using Mint 17.3 or Windows 7. (Adapter make and model: TP-Link TL-WN851nd) The symptoms: When running speedtest utils (speedtest.net, xfinityspeedtest.org, etc) OR streaming audio OR video (YouTubeTV) in Chrome OR Firefox while connected to wifi, the mouse and keyboard will freeze, plus an audible static ("white noise") will often come from the speakers. Sometimes speedtest or whatever was being streamed at the time will continue to run for several seconds, even though the keyboard and mouse are frozen. Othertimes, everything freezes at the same time. At best it is necessary to perform a hard shutdown and reboot. At worst, the crash corrupts the BIOS (about 50% of the time...) and I have to reconfigure the BIOS before I can use the PC, and/or the OS/boot configuration will be corrupted and I have to use "Boot Repair" and/or restore a previously saved backup image before the PC can be used. This problem has been 100% repeatable. What I have tried: 1) Updated the firmware-atheros to the newest version (20200619-1). The wireless still froze. 2) Using "Network Settings" I disabled wireless N on the adapter PLUS I disabled wireless N on my ASUS RT-AC66U_B1 router (i.e. I used 802.11b or 802.11g Legacy mode only), and re-ran speedtest, but the system still crashed. The only difference was that it took longer; I presume due to the slower download and upload speeds. 3) Booting from a live USB (both Mint 20 and LMDE), I connected to wifi and ran speedtest. The system still crashed. (Booting the live USB in UEFI or Legacy BIOS mode made no difference.) 4) I attempted to replace the ath9k driver that comes with Mint 20 with the ath9k driver in Mint 17.3, but it appears that the drivers are signed in some fashion, preventing older drivers from being used with the newer kernels. 5) Tweeking the wifi, proxy, IPv4, and IPv6 settings from their defaults made no difference. 6) The system does not crash when both wired and wifi connections are enabled. I presume this is because the wired connection is preferred (has "priority"). 7) The output from "lspci -b -vvv" shows that mint 17.3 is using the same driver name (ath9k) and interrupt as mint 20.04. 8) Although I have tested this issue many times, only once was a crash log generated, and it was lost after a subsequent crash. Sorry... 9) Thinking the crash may be related to downloads only, I ran "testmy.net /upload" to skip the download part of the speedtest, and the system still crashed. (The problem ***may be*** related to download/upload speed, but I was unable to determine this even though I ran "testmy.net /upload" manually; the crash still occurred.) 10) I have verified that the wireless adapter is functioning properly using Windows 7 and Mint 17.3. Typical download and upload speeds are 90+ Mbps. 11) I have tested with a VPN enabled and disabled; the result is the same. 12) I have tried to find an alternate driver; there are none available for Linux on TP-Links's website and it appears that "linux-backport-modules" is no longer supported (eg "madwifi"). I also tried blacklisting ath9k and installing the Windows XP driver using "ndiswrapper"; the driver would install however passing it on to the kernel via "modprobe ndiswrapper" would hang (not the system, just the modprobe itself). 13) As a last gasp effort, I disabled wireless security in both Mint 20 and the router (i.e. making the wireless visible and open to the outside world); made no difference. Other: 1) There are no known issues when accessing the internet via a hard wired connection. See the following for the system configuration, driver and package info, et al. ------------------------------ daddio@lmde:~$ inxi -N Network: Device-1: Qualcomm Atheros AR9227 Wireless Network Adapter driver: ath9k Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 daddio@lmde:~$ ------------------------------ daddio@lmde:~$ apt policy firmware-atheros firmware-atheros: Installed: 20190114-2 Candidate: 20190114-2 Version table: 20190717-2~bpo10+1 100 100 https://deb.debian.org/debian buster-backports/non-free amd64 Packages 100 https://deb.debian.org/debian buster-backports/non-free i386 Packages *** 20190114-2 500 500 https://deb.debian.org/debian buster/non-free amd64 Packages 500 https://deb.debian.org/debian buster/non-free i386 Packages 100 /var/lib/dpkg/status daddio@lmde:~$ ------------------------------ SysInfo: [code] System: Host: lmde Kernel: 4.19.0-10-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: Cinnamon 4.6.6 wm: muffin dm: LightDM Distro: LMDE 4 Debbie base: Debian 10.2 buster Machine: Type: Desktop Mobo: MSI model: 970A-G46 (MS-7693) v: 2.0 serial: <filter> BIOS: American Megatrends v: 2.8 date: 01/08/2016 CPU: Topology: 6-Core model: AMD FX-6300 bits: 64 type: MCP arch: Bulldozer L2 cache: 2048 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 41998 Speed: 3497 MHz min/max: N/A Core speeds (MHz): 1: 3497 2: 3494 3: 3495 4: 3498 5: 3474 6: 3508 Graphics: Device-1: NVIDIA GF106 [GeForce GTS 450] driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:0dc4 Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa resolution: 1600x900~60Hz OpenGL: renderer: NVC3 v: 4.3 Mesa 18.3.6 direct render: Yes Audio: Device-1: AMD SBx00 Azalia vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1002:4383 Device-2: NVIDIA GF106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0be9 Sound Server: ALSA v: k4.19.0-10-amd64 Network: Device-1: Qualcomm Atheros AR9227 Wireless Network Adapter driver: ath9k v: kernel port: e000 bus ID: 03:06.0 chip ID: 168c:002d IF: wlp3s6 state: down mac: <filter> Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169 v: kernel port: d000 bus ID: 04:00.0 chip ID: 10ec:8168 IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A Drives: Local Storage: total: 1.24 TiB used: 476.55 GiB (37.6%) ID-1: /dev/sda vendor: Patriot model: Blast size: 223.57 GiB speed: 6.0 Gb/s serial: <filter> ID-2: /dev/sdb vendor: Patriot model: Blast size: 111.79 GiB speed: 6.0 Gb/s serial: <filter> ID-3: /dev/sdc vendor: Seagate model: ST1000LM014-1EJ164 size: 931.51 GiB speed: 6.0 Gb/s serial: <filter> Partition: ID-1: / size: 101.56 GiB used: 23.88 GiB (23.5%) fs: ext4 dev: /dev/sdb2 ID-2: swap-1 size: 8.10 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb1 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 chip ID: 1d6b:0002 Device-1: 1-2:2 info: Canon PIXMA MX330 type: <vendor specific> driver: usblp rev: 2.0 chip ID: 04a9:1737 Device-2: 1-5:5 info: HP LaserJet P1006 type: Printer driver: N/A rev: 2.0 chip ID: 03f0:3e17 Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 chip ID: 1d6b:0003 Hub: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 chip ID: 1d6b:0002 Device-3: 4-3:2 info: Z-Star Micro type: Video driver: uvcvideo rev: 2.0 chip ID: 0ac8:3450 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 chip ID: 1d6b:0001 Device-4: 6-3:2 info: Dell Dell QuietKey Keyboard type: Keyboard driver: hid-generic,usbhid rev: 1.1 chip ID: 413c:2106 Device-5: 6-4:3 info: Logitech Optical Wheel Mouse type: Mouse driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c016 Hub: 7-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 chip ID: 1d6b:0001 Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001 Hub: 9-0:1 info: Full speed (or root) Hub ports: 4 rev: 1.1 chip ID: 1d6b:0001 Sensors: System Temperatures: cpu: 26.4 C mobo: N/A gpu: nouveau temp: 41 C Fan Speeds (RPM): N/A gpu: nouveau fan: 1110 Repos: No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/nordvpn.list 1: deb https: //repo.nordvpn.com/deb/nordvpn/debian stable main Active apt repos in: /etc/apt/sources.list.d/official-package- repositories.list 1: deb http: //packages.linuxmint.com debbie main upstream import backport #id:linuxmint_main 2: deb https: //deb.debian.org/debian buster main contrib non-free 3: deb https: //deb.debian.org/debian buster-updates main contrib non-free 4: deb http: //security.debian.org buster/updates main contrib non- free 5: deb https: //deb.debian.org/debian buster-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/spotify.list 1: deb http: //repository.spotify.com stable non-free Info: Processes: 192 Uptime: 4h 03m Memory: 7.74 GiB used: 827.0 MiB (10.4%) Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: Unknown python3.7 client inxi: 3.0.32 [/code] ------------------------------------------------------- daddio@lmde:~$ lsmod Module Size Used by cmac 16384 1 ctr 16384 4 ccm 20480 6 uvcvideo 118784 0 videobuf2_vmalloc 16384 1 uvcvideo videobuf2_memops 16384 1 videobuf2_vmalloc videobuf2_v4l2 28672 1 uvcvideo videobuf2_common 53248 2 videobuf2_v4l2,uvcvideo snd_usb_audio 258048 0 videodev 212992 3 videobuf2_v4l2,uvcvideo,videobuf2_common snd_usbmidi_lib 36864 1 snd_usb_audio media 45056 2 videodev,uvcvideo usblp 24576 0 snd_rawmidi 40960 1 snd_usbmidi_lib snd_seq_device 16384 1 snd_rawmidi snd_hda_codec_hdmi 61440 4 arc4 16384 2 ath9k 135168 0 ath9k_common 20480 1 ath9k ath9k_hw 483328 2 ath9k_common,ath9k ath 36864 3 ath9k_common,ath9k,ath9k_hw fuse 122880 7 edac_mce_amd 28672 0 mac80211 835584 1 ath9k snd_hda_codec_realtek 122880 1 kvm_amd 106496 0 snd_hda_codec_generic 86016 1 snd_hda_codec_realtek ccp 98304 1 kvm_amd rng_core 16384 1 ccp snd_hda_intel 49152 8 cfg80211 774144 4 ath9k_common,ath9k,ath,mac80211 snd_hda_codec 151552 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek kvm 757760 1 kvm_amd irqbypass 16384 1 kvm crct10dif_pclmul 16384 0 crc32_pclmul 16384 0 sg 36864 0 rfkill 28672 3 cfg80211 snd_hda_core 94208 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek ghash_clmulni_intel 16384 0 pcspkr 16384 0 k10temp 16384 0 snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec fam15h_power 16384 0 snd_pcm 114688 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core snd_timer 36864 1 snd_pcm snd 94208 26 snd_hda_codec_generic,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi sp5100_tco 16384 0 soundcore 16384 1 snd evdev 28672 10 uinput 20480 1 parport_pc 32768 0 ppdev 20480 0 lp 20480 0 parport 57344 3 parport_pc,lp,ppdev ip_tables 28672 0 x_tables 45056 1 ip_tables autofs4 49152 2 ext4 741376 2 crc16 16384 1 ext4 mbcache 16384 1 ext4 jbd2 122880 1 ext4 crc32c_generic 16384 0 fscrypto 32768 1 ext4 ecb 16384 0 hid_generic 16384 0 usbhid 57344 0 hid 135168 2 usbhid,hid_generic btrfs 1400832 0 xor 24576 1 btrfs zstd_decompress 81920 1 btrfs zstd_compress 172032 1 btrfs xxhash 16384 2 zstd_compress,zstd_decompress raid6_pq 122880 1 btrfs libcrc32c 16384 1 btrfs dm_mirror 28672 0 dm_region_hash 20480 1 dm_mirror dm_log 20480 2 dm_region_hash,dm_mirror dm_mod 155648 2 dm_log,dm_mirror sr_mod 28672 0 cdrom 65536 1 sr_mod sd_mod 61440 8 nouveau 2179072 10 ohci_pci 16384 0 crc32c_intel 24576 5 video 45056 1 nouveau i2c_algo_bit 16384 1 nouveau ttm 131072 1 nouveau ahci 40960 5 drm_kms_helper 208896 1 nouveau r8169 90112 0 libahci 40960 1 ahci xhci_pci 16384 0 mxm_wmi 16384 1 nouveau xhci_hcd 266240 1 xhci_pci aesni_intel 200704 5 drm 495616 6 drm_kms_helper,ttm,nouveau realtek 20480 1 libphy 77824 2 r8169,realtek ohci_hcd 61440 1 ohci_pci ehci_pci 16384 0 libata 270336 2 libahci,ahci ehci_hcd 94208 1 ehci_pci aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel i2c_piix4 24576 0 usbcore 294912 11 xhci_hcd,ohci_hcd,ehci_pci,snd_usb_audio,usbhid,snd_usbmidi_lib,usblp,uvcvideo,ehci_hcd,xhci_pci,ohci_pci scsi_mod 249856 4 sd_mod,libata,sg,sr_mod usb_common 16384 1 usbcore wmi 28672 2 mxm_wmi,nouveau button 16384 1 nouveau daddio@lmde:~$ ------------------------------------------------------- # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 2.7 present. 54 structures occupying 2228 bytes. Table at 0xDE849018. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: V2.8 Release Date: 01/08/2016 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 8192 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 4.6 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: MSI Product Name: MS-7693 Version: 2.0 Serial Number: To be filled by O.E.M. UUID: 00000000-0000-0000-0000-d43d7e9e3eb5 Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: MSI Product Name: 970A-G46 (MS-7693) Version: 2.0 Serial Number: To be filled by O.E.M. Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: MSI Type: Desktop Lock: Not Present Version: 2.0 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: To be filled by O.E.M. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: FX Manufacturer: AMD ID: 20 0F 60 00 FF FB 8B 17 Signature: Family 21, Model 2, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD FX(tm)-6300 Six-Core Processor Voltage: 1.3 V External Clock: 200 MHz Max Speed: 3500 MHz Current Speed: 3500 MHz Status: Populated, Enabled Upgrade: Socket AM3 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 6 Core Enabled: 6 Thread Count: 6 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 288 kB Maximum Size: 288 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 2-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 6144 kB Maximum Size: 6144 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8192 kB Maximum Size: 8192 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 64-way Set-associative Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A1 Internal Connector Type: None External Reference Designator: TV Out External Connector Type: Mini Centronics Type-14 Port Type: Other Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2A Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2B Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9A1 - TPM HDR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9C1 - PCIE DOCKING CONN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2B3 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6C2 - EXT HDMI Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3C1 - GMCH FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1D1 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E2 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E4 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E3 - LPC HOT DOCKING Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E1 - SCAN MATRIX Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G1 - LPC SIDE BAND Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8F1 - UNIFIED Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6F1 - LVDS Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2F1 - LAI FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2G1 - GFX VID Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1G6 - AC JACK Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0020, DMI type 9, 17 bytes System Slot Information Designation: J6B2 Type: x16 PCI Express Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:01.0 Handle 0x0021, DMI type 9, 17 bytes System Slot Information Designation: J6B1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.3 Handle 0x0022, DMI type 9, 17 bytes System Slot Information Designation: J6D1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.4 Handle 0x0023, DMI type 9, 17 bytes System Slot Information Designation: J7B1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.5 Handle 0x0024, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. Handle 0x0025, DMI type 12, 5 bytes System Configuration Options Option 1: To Be Filled By O.E.M. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0027, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Array Handle: 0x0026 Partition Width: 255 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A1_DIMM0 Bank Locator: A1_BANK0 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Configured Memory Speed: Unknown Handle 0x0029, DMI type 126, 35 bytes Inactive Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A1_DIMM1 Bank Locator: A1_BANK1 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MT/s Manufacturer: Corsair Serial Number: 00000000 Asset Tag: A1_AssetTagNum1 Part Number: CMX8GX3M2A1600C9 Rank: 2 Configured Memory Speed: 667 MT/s Handle 0x002B, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000001FFFF Range Size: 128 kB Physical Device Handle: 0x002A Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A1_DIMM2 Bank Locator: A1_BANK2 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: A1_Manufacturer2 Serial Number: A1_SerNum2 Asset Tag: A1_AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Configured Memory Speed: Unknown Handle 0x002D, DMI type 126, 35 bytes Inactive Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A1_DIMM3 Bank Locator: A1_BANK3 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MT/s Manufacturer: Corsair Serial Number: 00000000 Asset Tag: A1_AssetTagNum3 Part Number: CMX8GX3M2A1600C9 Rank: 2 Configured Memory Speed: 667 MT/s Handle 0x002F, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000001FFFF Range Size: 128 kB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0030, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0031, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard IGD Type: Video Status: Enabled Type Instance: 1 Bus Address: 0000:00:02.0 Handle 0x0032, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:19.0 Handle 0x0033, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard 1394 Type: Other Status: Enabled Type Instance: 1 Bus Address: 0000:03:1c.2 Handle 0x0039, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x003B, DMI type 127, 4 bytes End Of Table
Problem: The ath9k wireless adapter driver appears to be "broken". Affects Mint 20 Cinnamon & LMDE, Ubuntu & Xubuntu 20.04.0 &.1 (I believe they all use the latest kernels). It is NOT "broken" when using Mint 17.3 or Windows 7. (Adapter make and model: TP-Link TL-WN851nd) The symptoms: When running speedtest utils (speedtest.net, xfinityspeedtest.org, etc) OR streaming audio OR video (YouTubeTV) in Chrome OR Firefox while connected to wifi, the mouse and keyboard will freeze, plus an audible static ("white noise") will often come from the speakers. Sometimes speedtest or whatever was being streamed at the time will continue to run for several seconds, even though the keyboard and mouse are frozen. Othertimes, everything freezes at the same time. At best it is necessary to perform a hard shutdown and reboot. At worst, the crash corrupts the BIOS (about 50% of the time...) and I have to reconfigure the BIOS before I can use the PC, and/or the OS/boot configuration will be corrupted and I have to use "Boot Repair" and/or restore a previously saved backup image before the PC can be used. This problem has been 100% repeatable. What I have tried: 1) Updated the firmware-atheros to the newest version (20200619-1). The wireless still froze. 2) Using "Network Settings" I disabled wireless N on the adapter PLUS I disabled wireless N on my ASUS RT-AC66U_B1 router (i.e. I used 802.11b or 802.11g Legacy mode only), and re-ran speedtest, but the system still crashed. The only difference was that it took longer; I presume due to the slower download and upload speeds. 3) Booting from a live USB (both Mint 20 and LMDE), I connected to wifi and ran speedtest. The system still crashed. (Booting the live USB in UEFI or Legacy BIOS mode made no difference.) 4) I attempted to replace the ath9k driver that comes with Mint 20 with the ath9k driver in Mint 17.3, but it appears that the drivers are signed in some fashion, preventing older drivers from being used with the newer kernels. 5) Tweeking the wifi, proxy, IPv4, and IPv6 settings from their defaults made no difference. 6) The system does not crash when both wired and wifi connections are enabled. I presume this is because the wired connection is preferred (has "priority"). 7) The output from "lspci -b -vvv" shows that mint 17.3 is using the same driver name (ath9k) and interrupt as mint 20.04. 8) Although I have tested this issue many times, only once was a crash log generated, and it was lost after a subsequent crash. Sorry... 9) Thinking the crash may be related to downloads only, I ran "testmy.net /upload" to skip the download part of the speedtest, and the system still crashed. (The problem ***may be*** related to download/upload speed, but I was unable to determine this even though I ran "testmy.net /upload" manually; the crash still occurred.) 10) I have verified that the wireless adapter is functioning properly using Windows 7 and Mint 17.3. Typical download and upload speeds are 90+ Mbps. 11) I have tested with a VPN enabled and disabled; the result is the same. 12) I have tried to find an alternate driver; there are none available for Linux on TP-Links's website and it appears that "linux-backport-modules" is no longer supported (eg "madwifi"). I also tried blacklisting ath9k and installing the Windows XP driver using "ndiswrapper"; the driver would install however passing it on to the kernel via "modprobe ndiswrapper" would hang (not the system, just the modprobe itself). 13) As a last gasp effort, I disabled wireless security in both Mint 20 and the router (i.e. making the wireless visible and open to the outside world); made no difference. Other: 1) There are no known issues when accessing the internet via a hard wired connection. See the following for the system configuration, driver and package info, et al. ------------------------------ daddio@lmde:~$ inxi -N Network: Device-1: Qualcomm Atheros AR9227 Wireless Network Adapter driver: ath9k Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 daddio@lmde:~$ ------------------------------ daddio@lmde:~$ apt policy firmware-atheros firmware-atheros: Installed: 20190114-2 Candidate: 20190114-2 Version table: 20190717-2~bpo10+1 100 100 https://deb.debian.org/debian buster-backports/non-free amd64 Packages 100 https://deb.debian.org/debian buster-backports/non-free i386 Packages *** 20190114-2 500 500 https://deb.debian.org/debian buster/non-free amd64 Packages 500 https://deb.debian.org/debian buster/non-free i386 Packages 100 /var/lib/dpkg/status daddio@lmde:~$ ------------------------------ SysInfo: [code] System: Host: lmde Kernel: 4.19.0-10-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 Desktop: Cinnamon 4.6.6 wm: muffin dm: LightDM Distro: LMDE 4 Debbie base: Debian 10.2 buster Machine: Type: Desktop Mobo: MSI model: 970A-G46 (MS-7693) v: 2.0 serial: <filter> BIOS: American Megatrends v: 2.8 date: 01/08/2016 CPU: Topology: 6-Core model: AMD FX-6300 bits: 64 type: MCP arch: Bulldozer L2 cache: 2048 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 41998 Speed: 3497 MHz min/max: N/A Core speeds (MHz): 1: 3497 2: 3494 3: 3495 4: 3498 5: 3474 6: 3508 Graphics: Device-1: NVIDIA GF106 [GeForce GTS 450] driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:0dc4 Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa resolution: 1600x900~60Hz OpenGL: renderer: NVC3 v: 4.3 Mesa 18.3.6 direct render: Yes Audio: Device-1: AMD SBx00 Azalia vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1002:4383 Device-2: NVIDIA GF106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0be9 Sound Server: ALSA v: k4.19.0-10-amd64 Network: Device-1: Qualcomm Atheros AR9227 Wireless Network Adapter driver: ath9k v: kernel port: e000 bus ID: 03:06.0 chip ID: 168c:002d IF: wlp3s6 state: down mac: <filter> Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169 v: kernel port: d000 bus ID: 04:00.0 chip ID: 10ec:8168 IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A Drives: Local Storage: total: 1.24 TiB used: 476.55 GiB (37.6%) ID-1: /dev/sda vendor: Patriot model: Blast size: 223.57 GiB speed: 6.0 Gb/s serial: <filter> ID-2: /dev/sdb vendor: Patriot model: Blast size: 111.79 GiB speed: 6.0 Gb/s serial: <filter> ID-3: /dev/sdc vendor: Seagate model: ST1000LM014-1EJ164 size: 931.51 GiB speed: 6.0 Gb/s serial: <filter> Partition: ID-1: / size: 101.56 GiB used: 23.88 GiB (23.5%) fs: ext4 dev: /dev/sdb2 ID-2: swap-1 size: 8.10 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb1 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 chip ID: 1d6b:0002 Device-1: 1-2:2 info: Canon PIXMA MX330 type: <vendor specific> driver: usblp rev: 2.0 chip ID: 04a9:1737 Device-2: 1-5:5 info: HP LaserJet P1006 type: Printer driver: N/A rev: 2.0 chip ID: 03f0:3e17 Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 chip ID: 1d6b:0003 Hub: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 chip ID: 1d6b:0002 Device-3: 4-3:2 info: Z-Star Micro type: Video driver: uvcvideo rev: 2.0 chip ID: 0ac8:3450 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 chip ID: 1d6b:0001 Device-4: 6-3:2 info: Dell Dell QuietKey Keyboard type: Keyboard driver: hid-generic,usbhid rev: 1.1 chip ID: 413c:2106 Device-5: 6-4:3 info: Logitech Optical Wheel Mouse type: Mouse driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c016 Hub: 7-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 chip ID: 1d6b:0001 Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001 Hub: 9-0:1 info: Full speed (or root) Hub ports: 4 rev: 1.1 chip ID: 1d6b:0001 Sensors: System Temperatures: cpu: 26.4 C mobo: N/A gpu: nouveau temp: 41 C Fan Speeds (RPM): N/A gpu: nouveau fan: 1110 Repos: No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/nordvpn.list 1: deb https: //repo.nordvpn.com/deb/nordvpn/debian stable main Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 1: deb http: //packages.linuxmint.com debbie main upstream import backport #id:linuxmint_main 2: deb https: //deb.debian.org/debian buster main contrib non-free 3: deb https: //deb.debian.org/debian buster-updates main contrib non-free 4: deb http: //security.debian.org buster/updates main contrib non-free 5: deb https: //deb.debian.org/debian buster-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/spotify.list 1: deb http: //repository.spotify.com stable non-free Info: Processes: 192 Uptime: 4h 03m Memory: 7.74 GiB used: 827.0 MiB (10.4%) Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: Unknown python3.7 client inxi: 3.0.32 [/code] ------------------------------------------------------- daddio@lmde:~$ lsmod Module Size Used by cmac 16384 1 ctr 16384 4 ccm 20480 6 uvcvideo 118784 0 videobuf2_vmalloc 16384 1 uvcvideo videobuf2_memops 16384 1 videobuf2_vmalloc videobuf2_v4l2 28672 1 uvcvideo videobuf2_common 53248 2 videobuf2_v4l2,uvcvideo snd_usb_audio 258048 0 videodev 212992 3 videobuf2_v4l2,uvcvideo,videobuf2_common snd_usbmidi_lib 36864 1 snd_usb_audio media 45056 2 videodev,uvcvideo usblp 24576 0 snd_rawmidi 40960 1 snd_usbmidi_lib snd_seq_device 16384 1 snd_rawmidi snd_hda_codec_hdmi 61440 4 arc4 16384 2 ath9k 135168 0 ath9k_common 20480 1 ath9k ath9k_hw 483328 2 ath9k_common,ath9k ath 36864 3 ath9k_common,ath9k,ath9k_hw fuse 122880 7 edac_mce_amd 28672 0 mac80211 835584 1 ath9k snd_hda_codec_realtek 122880 1 kvm_amd 106496 0 snd_hda_codec_generic 86016 1 snd_hda_codec_realtek ccp 98304 1 kvm_amd rng_core 16384 1 ccp snd_hda_intel 49152 8 cfg80211 774144 4 ath9k_common,ath9k,ath,mac80211 snd_hda_codec 151552 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek kvm 757760 1 kvm_amd irqbypass 16384 1 kvm crct10dif_pclmul 16384 0 crc32_pclmul 16384 0 sg 36864 0 rfkill 28672 3 cfg80211 snd_hda_core 94208 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek ghash_clmulni_intel 16384 0 pcspkr 16384 0 k10temp 16384 0 snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec fam15h_power 16384 0 snd_pcm 114688 7 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core snd_timer 36864 1 snd_pcm snd 94208 26 snd_hda_codec_generic,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi sp5100_tco 16384 0 soundcore 16384 1 snd evdev 28672 10 uinput 20480 1 parport_pc 32768 0 ppdev 20480 0 lp 20480 0 parport 57344 3 parport_pc,lp,ppdev ip_tables 28672 0 x_tables 45056 1 ip_tables autofs4 49152 2 ext4 741376 2 crc16 16384 1 ext4 mbcache 16384 1 ext4 jbd2 122880 1 ext4 crc32c_generic 16384 0 fscrypto 32768 1 ext4 ecb 16384 0 hid_generic 16384 0 usbhid 57344 0 hid 135168 2 usbhid,hid_generic btrfs 1400832 0 xor 24576 1 btrfs zstd_decompress 81920 1 btrfs zstd_compress 172032 1 btrfs xxhash 16384 2 zstd_compress,zstd_decompress raid6_pq 122880 1 btrfs libcrc32c 16384 1 btrfs dm_mirror 28672 0 dm_region_hash 20480 1 dm_mirror dm_log 20480 2 dm_region_hash,dm_mirror dm_mod 155648 2 dm_log,dm_mirror sr_mod 28672 0 cdrom 65536 1 sr_mod sd_mod 61440 8 nouveau 2179072 10 ohci_pci 16384 0 crc32c_intel 24576 5 video 45056 1 nouveau i2c_algo_bit 16384 1 nouveau ttm 131072 1 nouveau ahci 40960 5 drm_kms_helper 208896 1 nouveau r8169 90112 0 libahci 40960 1 ahci xhci_pci 16384 0 mxm_wmi 16384 1 nouveau xhci_hcd 266240 1 xhci_pci aesni_intel 200704 5 drm 495616 6 drm_kms_helper,ttm,nouveau realtek 20480 1 libphy 77824 2 r8169,realtek ohci_hcd 61440 1 ohci_pci ehci_pci 16384 0 libata 270336 2 libahci,ahci ehci_hcd 94208 1 ehci_pci aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel glue_helper 16384 1 aesni_intel i2c_piix4 24576 0 usbcore 294912 11 xhci_hcd,ohci_hcd,ehci_pci,snd_usb_audio,usbhid,snd_usbmidi_lib,usblp,uvcvideo,ehci_hcd,xhci_pci,ohci_pci scsi_mod 249856 4 sd_mod,libata,sg,sr_mod usb_common 16384 1 usbcore wmi 28672 2 mxm_wmi,nouveau button 16384 1 nouveau daddio@lmde:~$ ------------------------------------------------------- # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 2.7 present. 54 structures occupying 2228 bytes. Table at 0xDE849018. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: V2.8 Release Date: 01/08/2016 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 8192 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 4.6 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: MSI Product Name: MS-7693 Version: 2.0 Serial Number: To be filled by O.E.M. UUID: 00000000-0000-0000-0000-d43d7e9e3eb5 Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: MSI Product Name: 970A-G46 (MS-7693) Version: 2.0 Serial Number: To be filled by O.E.M. Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 22 bytes Chassis Information Manufacturer: MSI Type: Desktop Lock: Not Present Version: 2.0 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: To be filled by O.E.M. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: FX Manufacturer: AMD ID: 20 0F 60 00 FF FB 8B 17 Signature: Family 21, Model 2, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD FX(tm)-6300 Six-Core Processor Voltage: 1.3 V External Clock: 200 MHz Max Speed: 3500 MHz Current Speed: 3500 MHz Status: Populated, Enabled Upgrade: Socket AM3 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 6 Core Enabled: 6 Thread Count: 6 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 288 kB Maximum Size: 288 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 2-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 6144 kB Maximum Size: 6144 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8192 kB Maximum Size: 8192 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 64-way Set-associative Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A1 Internal Connector Type: None External Reference Designator: TV Out External Connector Type: Mini Centronics Type-14 Port Type: Other Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2A Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2B Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9A1 - TPM HDR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9C1 - PCIE DOCKING CONN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2B3 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6C2 - EXT HDMI Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3C1 - GMCH FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1D1 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E2 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E4 - MDC INTPSR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E3 - LPC HOT DOCKING Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9E1 - SCAN MATRIX Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G1 - LPC SIDE BAND Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8F1 - UNIFIED Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6F1 - LVDS Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2F1 - LAI FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2G1 - GFX VID Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1G6 - AC JACK Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0020, DMI type 9, 17 bytes System Slot Information Designation: J6B2 Type: x16 PCI Express Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:01.0 Handle 0x0021, DMI type 9, 17 bytes System Slot Information Designation: J6B1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.3 Handle 0x0022, DMI type 9, 17 bytes System Slot Information Designation: J6D1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.4 Handle 0x0023, DMI type 9, 17 bytes System Slot Information Designation: J7B1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.5 Handle 0x0024, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. Handle 0x0025, DMI type 12, 5 bytes System Configuration Options Option 1: To Be Filled By O.E.M. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0027, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x001FFFFFFFF Range Size: 8 GB Physical Array Handle: 0x0026 Partition Width: 255 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A1_DIMM0 Bank Locator: A1_BANK0 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Configured Memory Speed: Unknown Handle 0x0029, DMI type 126, 35 bytes Inactive Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A1_DIMM1 Bank Locator: A1_BANK1 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MT/s Manufacturer: Corsair Serial Number: 00000000 Asset Tag: A1_AssetTagNum1 Part Number: CMX8GX3M2A1600C9 Rank: 2 Configured Memory Speed: 667 MT/s Handle 0x002B, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000001FFFF Range Size: 128 kB Physical Device Handle: 0x002A Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A1_DIMM2 Bank Locator: A1_BANK2 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: A1_Manufacturer2 Serial Number: A1_SerNum2 Asset Tag: A1_AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Configured Memory Speed: Unknown Handle 0x002D, DMI type 126, 35 bytes Inactive Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A1_DIMM3 Bank Locator: A1_BANK3 Type: DDR3 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 667 MT/s Manufacturer: Corsair Serial Number: 00000000 Asset Tag: A1_AssetTagNum3 Part Number: CMX8GX3M2A1600C9 Rank: 2 Configured Memory Speed: 667 MT/s Handle 0x002F, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000001FFFF Range Size: 128 kB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0027 Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x0030, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x0031, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard IGD Type: Video Status: Enabled Type Instance: 1 Bus Address: 0000:00:02.0 Handle 0x0032, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard LAN Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:00:19.0 Handle 0x0033, DMI type 41, 11 bytes Onboard Device Reference Designation: Onboard 1394 Type: Other Status: Enabled Type Instance: 1 Bus Address: 0000:03:1c.2 Handle 0x0039, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x003B, DMI type 127, 4 bytes End Of Table
daddio@lmde:~$ dmesg [ 0.000000] Linux version 4.19.0-10-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.132-1 (2020-07-24) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=d1a02659-566f-47fe-9114-bdf5a773d9b1 ro quiet splash [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x20b/0x2b0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd9a5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd9a6000-0x00000000ddb30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddb31000-0x00000000dde7afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dde7b000-0x00000000dea40fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dea41000-0x00000000dea41fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dea42000-0x00000000dec47fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dec48000-0x00000000df06dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df06e000-0x00000000df7eefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7ef000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V2.8 01/08/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000DF800000 mask FFFFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000021f000000 aka 8688M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xdf800000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x3157f000-0x34ab6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DDE6B068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DDE71520 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624) [ 0.000000] ACPI: DSDT 0x00000000DDE6B158 0063C2 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DDE74080 000040 [ 0.000000] ACPI: APIC 0x00000000DDE71630 00008E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DDE716C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DDE71708 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DDE71748 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: IVRS 0x00000000DDE71780 0000C0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21effa000-0x21effefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd9a5fff] [ 0.000000] node 0: [mem 0x00000000dea41000-0x00000000dea41fff] [ 0.000000] node 0: [mem 0x00000000dec48000-0x00000000df06dfff] [ 0.000000] node 0: [mem 0x00000000df7ef000-0x00000000df7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000021effffff] [ 0.000000] Zeroed struct page in unavailable ranges: 12934 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.000000] On node 0 totalpages: 2084218 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14136 pages used for memmap [ 0.000000] DMA32 zone: 904670 pages, LIFO batch:63 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1175551 pages, LIFO batch:63 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd9a6000-0xddb30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xddb31000-0xdde7afff] [ 0.000000] PM: Registered nosave memory: [mem 0xdde7b000-0xdea40fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdea42000-0xdec47fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf06e000-0xdf7eefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] [mem 0xdf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144 [ 0.000000] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2051629 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=d1a02659-566f-47fe-9114-bdf5a773d9b1 ro quiet splash [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] [ 0.000000] Memory: 7993868K/8336872K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1592K init, 2272K bss, 343004K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 31900 entries in 125 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 33024, nr_irqs: 1016, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180810 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036000] tsc: Unable to calibrate against PIT [ 0.036000] tsc: using HPET reference calibration [ 0.036000] tsc: Detected 3762.493 MHz processor [ 0.000006] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6c77e136e3c, max_idle_ns: 881591084690 ns [ 0.000013] Calibrating delay loop (skipped), value calculated using timer frequency.. 7524.98 BogoMIPS (lpj=15049972) [ 0.000015] pid_max: default: 32768 minimum: 301 [ 0.000043] Security Framework initialized [ 0.000044] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000059] AppArmor: AppArmor initialized [ 0.001585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004422] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004459] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004489] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004688] LVT offset 1 assigned for vector 0xf9 [ 0.004692] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.004692] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.004694] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.004695] Spectre V2 : Mitigation: Full AMD retpoline [ 0.004696] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.004702] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.004702] Spectre V2 : User space: Vulnerable [ 0.004703] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.009262] Freeing SMP alternatives memory: 24K [ 0.122236] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.122344] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.122348] ... version: 0 [ 0.122349] ... bit width: 48 [ 0.122349] ... generic registers: 6 [ 0.122350] ... value mask: 0000ffffffffffff [ 0.122350] ... max period: 00007fffffffffff [ 0.122351] ... fixed-purpose events: 0 [ 0.122351] ... event mask: 000000000000003f [ 0.122387] rcu: Hierarchical SRCU implementation. [ 0.122726] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.122792] smp: Bringing up secondary CPUs ... [ 0.122878] x86: Booting SMP configuration: [ 0.122878] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.146807] smp: Brought up 1 node, 6 CPUs [ 0.146807] smpboot: Max logical packages: 1 [ 0.146807] smpboot: Total of 6 processors activated (45149.91 BogoMIPS) [ 0.148463] devtmpfs: initialized [ 0.148463] x86/mm: Memory block size: 128MB [ 0.152596] PM: Registering ACPI NVS region [mem 0xddb31000-0xdde7afff] (3448832 bytes) [ 0.152596] PM: Registering ACPI NVS region [mem 0xdea42000-0xdec47fff] (2121728 bytes) [ 0.152596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.152596] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.152596] pinctrl core: initialized pinctrl subsystem [ 0.152596] NET: Registered protocol family 16 [ 0.152596] audit: initializing netlink subsys (disabled) [ 0.152596] audit: type=2000 audit(1598052396.188:1): state=initialized audit_enabled=0 res=1 [ 0.152596] cpuidle: using governor ladder [ 0.152596] cpuidle: using governor menu [ 0.152596] ACPI: bus type PCI registered [ 0.152596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.152596] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.152596] PCI: not using MMCONFIG [ 0.152596] PCI: Using configuration type 1 for base access [ 0.152596] PCI: Using configuration type 1 for extended access [ 0.152596] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.152596] mtrr: probably your BIOS does not setup all CPUs. [ 0.152596] mtrr: corrected configuration. [ 0.152885] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.152885] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.152885] ACPI: Added _OSI(Module Device) [ 0.152885] ACPI: Added _OSI(Processor Device) [ 0.152885] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152885] ACPI: Added _OSI(Processor Aggregator Device) [ 0.152885] ACPI: Added _OSI(Linux-Dell-Video) [ 0.152885] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.157159] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.158049] ACPI: Interpreter enabled [ 0.158063] ACPI: (supports S0 S3 S4 S5) [ 0.158064] ACPI: Using IOAPIC for interrupt routing [ 0.158182] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.158214] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.158225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158408] ACPI: Enabled 11 GPEs in block 00 to 1F [ 0.163405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.163410] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.163413] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.163686] PCI host bridge to bus 0000:00 [ 0.163688] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.163689] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.163690] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.163691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.163692] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.163693] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.163694] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window] [ 0.163696] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.163704] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.163805] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.163898] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.163914] pci 0000:00:02.0: enabling Extended Tags [ 0.163934] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.164011] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.164027] pci 0000:00:04.0: enabling Extended Tags [ 0.164045] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.164131] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.164146] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.164153] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.164159] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.164166] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.164172] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.164179] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff] [ 0.164273] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.164286] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff] [ 0.164393] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.164409] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff] [ 0.164466] pci 0000:00:12.2: supports D1 D2 [ 0.164467] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.164540] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.164552] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff] [ 0.164663] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.164678] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff] [ 0.164735] pci 0000:00:13.2: supports D1 D2 [ 0.164736] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.164810] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.164922] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.164940] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit] [ 0.164988] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.165055] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.165167] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.165287] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.165299] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff] [ 0.165408] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.165436] pci 0000:00:15.0: enabling Extended Tags [ 0.165468] pci 0000:00:15.0: supports D1 D2 [ 0.165550] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.165563] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff] [ 0.165670] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.165685] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff] [ 0.165742] pci 0000:00:16.2: supports D1 D2 [ 0.165743] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.165815] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.165882] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.165945] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.166008] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.166075] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.166139] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.166239] pci 0000:01:00.0: [10de:0dc4] type 00 class 0x030000 [ 0.166254] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 0.166262] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.166270] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.166276] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.166281] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.166286] pci 0000:01:00.0: enabling Extended Tags [ 0.166398] pci 0000:01:00.1: [10de:0be9] type 00 class 0x040300 [ 0.166410] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.166441] pci 0000:01:00.1: enabling Extended Tags [ 0.166511] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring [ 0.176032] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.176035] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.176037] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff] [ 0.176039] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.176084] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.176107] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit] [ 0.176199] pci 0000:02:00.0: PME# supported from D3hot [ 0.176268] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.176271] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.176281] pci_bus 0000:03: extended config space not accessible [ 0.176308] pci 0000:03:05.0: [168c:002d] type 00 class 0x028000 [ 0.176325] pci 0000:03:05.0: reg 0x10: [mem 0xfe200000-0xfe20ffff] [ 0.176405] pci 0000:03:05.0: PME# supported from D0 D3hot [ 0.176470] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.176475] pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.176477] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.176479] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.176480] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.176481] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.176482] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.176483] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.176484] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode) [ 0.176532] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.176584] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.176609] pci 0000:04:00.0: reg 0x18: [mem 0xfe104000-0xfe104fff 64bit pref] [ 0.176624] pci 0000:04:00.0: reg 0x20: [mem 0xfe100000-0xfe103fff 64bit pref] [ 0.176709] pci 0000:04:00.0: supports D1 D2 [ 0.176709] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176809] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.176813] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 0.176816] pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.177173] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.177226] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.177280] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.177334] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0 [ 0.177378] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.177412] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.177446] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.177480] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.177637] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.177637] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.177637] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.177637] vgaarb: loaded [ 0.177637] pps_core: LinuxPPS API ver. 1 registered [ 0.177637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 0.177637] PTP clock support registered [ 0.177637] EDAC MC: Ver: 3.0.0 [ 0.177637] PCI: Using ACPI for IRQ routing [ 0.184165] PCI: pci_cache_line_size set to 64 bytes [ 0.184211] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.184212] e820: reserve RAM buffer [mem 0xdd9a6000-0xdfffffff] [ 0.184213] e820: reserve RAM buffer [mem 0xdea42000-0xdfffffff] [ 0.184214] e820: reserve RAM buffer [mem 0xdf06e000-0xdfffffff] [ 0.184215] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.184216] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.184304] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.184304] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.186098] clocksource: Switched to clocksource tsc-early [ 0.194580] VFS: Disk quotas dquot_6.6.0 [ 0.194593] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.194693] AppArmor: AppArmor Filesystem Enabled [ 0.194707] pnp: PnP ACPI init [ 0.194801] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.194805] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.195024] system 00:01: [io 0x040b] has been reserved [ 0.195025] system 00:01: [io 0x04d6] has been reserved [ 0.195027] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.195028] system 00:01: [io 0x0c14] has been reserved [ 0.195029] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.195030] system 00:01: [io 0x0c52] has been reserved [ 0.195031] system 00:01: [io 0x0c6c] has been reserved [ 0.195032] system 00:01: [io 0x0c6f] has been reserved [ 0.195033] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.195034] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.195035] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.195036] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.195037] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.195038] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.195039] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.195040] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.195043] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.195044] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.195045] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.195047] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.195048] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.195050] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.195051] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.195052] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.195054] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.195057] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195169] system 00:02: [io 0x0480-0x0481] has been reserved [ 0.195172] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195333] pnp 00:03: [dma 0 disabled] [ 0.195369] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.195390] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.195441] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.195444] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195480] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195598] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved [ 0.195601] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195686] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.195689] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.195800] pnp: PnP ACPI: found 9 devices [ 0.201845] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.201864] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.201866] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.201868] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff] [ 0.201870] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.201872] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.201874] pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.201877] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.201881] pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.201886] pci 0000:00:15.0: PCI bridge to [bus 04] [ 0.201888] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 0.201891] pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.201896] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.201897] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.201899] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.201900] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.201901] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.201902] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.201903] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.201904] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.201905] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff] [ 0.201906] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.201907] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.201908] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff] [ 0.201909] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.201910] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.201911] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.201912] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window] [ 0.201913] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.201914] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.201915] pci_bus 0000:03: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.201916] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.201916] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.201968] NET: Registered protocol family 2 [ 0.202101] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.202130] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.202264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.202451] TCP: Hash tables configured (established 65536 bind 65536) [ 0.202492] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.202523] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.202582] NET: Registered protocol family 1 [ 0.202586] NET: Registered protocol family 44 [ 0.289672] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c1 took 85029 usecs [ 0.377663] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c1 took 85825 usecs [ 0.465660] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c1 took 85825 usecs [ 0.553656] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c1 took 85926 usecs [ 0.553776] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.553788] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.553789] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.553925] PCI: CLS 64 bytes, default 64 [ 0.553956] Unpacking initramfs... [ 1.271644] Freeing initrd memory: 54496K [ 1.272226] iommu: Adding device 0000:00:00.0 to group 0 [ 1.272297] iommu: Adding device 0000:00:02.0 to group 1 [ 1.272368] iommu: Adding device 0000:00:04.0 to group 2 [ 1.272442] iommu: Adding device 0000:00:11.0 to group 3 [ 1.272514] iommu: Adding device 0000:00:12.0 to group 4 [ 1.272527] iommu: Adding device 0000:00:12.2 to group 4 [ 1.272606] iommu: Adding device 0000:00:13.0 to group 5 [ 1.272620] iommu: Adding device 0000:00:13.2 to group 5 [ 1.272686] iommu: Adding device 0000:00:14.0 to group 6 [ 1.272760] iommu: Adding device 0000:00:14.2 to group 7 [ 1.272828] iommu: Adding device 0000:00:14.3 to group 8 [ 1.272895] iommu: Adding device 0000:00:14.4 to group 9 [ 1.272958] iommu: Adding device 0000:00:14.5 to group 10 [ 1.273031] iommu: Adding device 0000:00:15.0 to group 11 [ 1.273104] iommu: Adding device 0000:00:16.0 to group 12 [ 1.273119] iommu: Adding device 0000:00:16.2 to group 12 [ 1.273201] iommu: Adding device 0000:01:00.0 to group 13 [ 1.273220] iommu: Adding device 0000:01:00.1 to group 13 [ 1.273286] iommu: Adding device 0000:02:00.0 to group 14 [ 1.273298] iommu: Adding device 0000:03:05.0 to group 9 [ 1.273311] iommu: Adding device 0000:04:00.0 to group 11 [ 1.310929] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.310929] AMD-Vi: Interrupt remapping enabled [ 1.311023] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.312732] amd_uncore: AMD NB counters detected [ 1.312841] LVT offset 0 assigned for vector 0x400 [ 1.312889] perf: AMD IBS detected (0x000000ff) [ 1.313451] Initialise system trusted keyrings [ 1.313458] Key type blacklist registered [ 1.313506] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.314838] zbud: loaded [ 1.477685] Key type asymmetric registered [ 1.477686] Asymmetric key parser 'x509' registered [ 1.477694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.477735] io scheduler noop registered [ 1.477735] io scheduler deadline registered [ 1.477762] io scheduler cfq registered (default) [ 1.477763] io scheduler mq-deadline registered [ 1.478092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.478583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.499018] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.499394] Linux agpgart interface v0.103 [ 1.499421] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de> [ 1.499422] AMD IOMMUv2 functionality not available on this system [ 1.499865] i8042: PNP: No PS/2 controller found. [ 1.499915] mousedev: PS/2 mouse device common for all mice [ 1.499941] rtc_cmos 00:04: RTC can wake from S4 [ 1.500054] rtc_cmos 00:04: registered as rtc0 [ 1.500066] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.500119] ledtrig-cpu: registered to indicate activity on CPUs [ 1.500309] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.500467] NET: Registered protocol family 10 [ 1.506166] Segment Routing with IPv6 [ 1.506181] mip6: Mobile IPv6 [ 1.506182] NET: Registered protocol family 17 [ 1.506210] mpls_gso: MPLS GSO support [ 1.506470] mce: Using 7 MCE banks [ 1.506481] microcode: microcode updated early to new patch_level=0x06000852 [ 1.506505] microcode: CPU0: patch_level=0x06000852 [ 1.506509] microcode: CPU1: patch_level=0x06000852 [ 1.506512] microcode: CPU2: patch_level=0x06000852 [ 1.506517] microcode: CPU3: patch_level=0x06000852 [ 1.506522] microcode: CPU4: patch_level=0x06000852 [ 1.506527] microcode: CPU5: patch_level=0x06000852 [ 1.506563] microcode: Microcode Update Driver: v2.2. [ 1.506571] sched_clock: Marking stable (1542551455, -35992550)->(1513149922, -6591017) [ 1.506750] registered taskstats version 1 [ 1.506751] Loading compiled-in X.509 certificates [ 1.544252] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.544268] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.544291] zswap: loaded using pool lzo/zbud [ 1.544364] AppArmor: AppArmor sha1 policy hashing enabled [ 1.544650] rtc_cmos 00:04: setting system clock to 2020-08-21 23:26:37 UTC (1598052397) [ 1.837695] Freeing unused kernel image memory: 1592K [ 1.860033] Write protecting the kernel read-only data: 16384k [ 1.861323] Freeing unused kernel image memory: 2028K [ 1.861512] Freeing unused kernel image memory: 780K [ 1.870360] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.870361] Run /init as init process [ 1.985200] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.985216] ACPI: Power Button [PWRB] [ 1.985274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.985281] ACPI: Power Button [PWRF] [ 1.999584] SCSI subsystem initialized [ 2.002913] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.002920] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.003037] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.003500] ACPI: bus type USB registered [ 2.003520] usbcore: registered new interface driver usbfs [ 2.003531] usbcore: registered new interface driver hub [ 2.003657] usbcore: registered new device driver usb [ 2.009482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.011125] ehci-pci: EHCI PCI platform driver [ 2.012251] QUIRK: Enable AMD PLL fix [ 2.012276] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.012284] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.012289] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.012305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.012321] ehci-pci 0000:00:12.2: debug port 1 [ 2.012372] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000 [ 2.016907] cryptd: max_cpu_qlen set to 1000 [ 2.025055] AVX version of gcm_enc/dec engaged. [ 2.025056] AES CTR mode by8 optimization enabled [ 2.025132] libata version 3.00 loaded. [ 2.028026] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.028090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.028092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.028094] usb usb1: Product: EHCI Host Controller [ 2.028095] usb usb1: Manufacturer: Linux 4.19.0-10-amd64 ehci_hcd [ 2.028096] usb usb1: SerialNumber: 0000:00:12.2 [ 2.028217] hub 1-0:1.0: USB hub found [ 2.028225] hub 1-0:1.0: 5 ports detected [ 2.028386] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.028392] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 2.037994] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 2.038253] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.038254] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.038255] usb usb2: Product: xHCI Host Controller [ 2.038256] usb usb2: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd [ 2.038257] usb usb2: SerialNumber: 0000:02:00.0 [ 2.038303] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.039078] hub 2-0:1.0: USB hub found [ 2.039086] hub 2-0:1.0: 2 ports detected [ 2.039199] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.039204] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 2.039207] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 2.039228] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.039250] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 2.039252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.039253] usb usb3: Product: xHCI Host Controller [ 2.039254] usb usb3: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd [ 2.039254] usb usb3: SerialNumber: 0000:02:00.0 [ 2.039363] hub 3-0:1.0: USB hub found [ 2.039372] hub 3-0:1.0: 2 ports detected [ 2.039577] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.039582] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.039588] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.039596] ehci-pci 0000:00:13.2: debug port 1 [ 2.039633] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000 [ 2.039642] ahci 0000:00:11.0: version 3.0 [ 2.039815] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.039817] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.041143] scsi host0: ahci [ 2.041319] scsi host1: ahci [ 2.041454] scsi host2: ahci [ 2.041575] scsi host3: ahci [ 2.041700] scsi host4: ahci [ 2.041831] scsi host5: ahci [ 2.041905] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19 [ 2.041907] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19 [ 2.041909] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19 [ 2.041910] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19 [ 2.041912] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19 [ 2.041914] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19 [ 2.041955] libphy: r8169: probed [ 2.042411] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, d4:3d:7e:9e:3e:b5, XID 2c900800, IRQ 35 [ 2.042413] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.043703] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 2.056027] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.056073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.056074] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.056075] usb usb4: Product: EHCI Host Controller [ 2.056076] usb usb4: Manufacturer: Linux 4.19.0-10-amd64 ehci_hcd [ 2.056077] usb usb4: SerialNumber: 0000:00:13.2 [ 2.056185] hub 4-0:1.0: USB hub found [ 2.056191] hub 4-0:1.0: 5 ports detected [ 2.056458] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.056463] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 2.056466] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.056473] ehci-pci 0000:00:16.2: debug port 1 [ 2.056502] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000 [ 2.072031] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.072110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.072111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.072113] usb usb5: Product: EHCI Host Controller [ 2.072113] usb usb5: Manufacturer: Linux 4.19.0-10-amd64 ehci_hcd [ 2.072114] usb usb5: SerialNumber: 0000:00:16.2 [ 2.072209] hub 5-0:1.0: USB hub found [ 2.072214] hub 5-0:1.0: 4 ports detected [ 2.073186] ohci-pci: OHCI PCI platform driver [ 2.073339] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.073345] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.073382] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000 [ 2.116528] MXM: GUID detected in BIOS [ 2.116700] nouveau 0000:01:00.0: NVIDIA GF106 (0c3200a1) [ 2.144661] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.144662] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.144663] usb usb6: Product: OHCI PCI host controller [ 2.144664] usb usb6: Manufacturer: Linux 4.19.0-10-amd64 ohci_hcd [ 2.144665] usb usb6: SerialNumber: 0000:00:12.0 [ 2.247493] nouveau 0000:01:00.0: bios: version 70.06.16.00.01 [ 2.247551] hub 6-0:1.0: USB hub found [ 2.247577] hub 6-0:1.0: 5 ports detected [ 2.248176] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.248180] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.248198] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000 [ 2.320057] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 2.320059] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.320060] usb usb7: Product: OHCI PCI host controller [ 2.320061] usb usb7: Manufacturer: Linux 4.19.0-10-amd64 ohci_hcd [ 2.320061] usb usb7: SerialNumber: 0000:00:13.0 [ 2.336068] hub 7-0:1.0: USB hub found [ 2.336075] hub 7-0:1.0: 5 ports detected [ 2.358342] ata6: SATA link down (SStatus 0 SControl 300) [ 2.358379] ata5: SATA link down (SStatus 0 SControl 300) [ 2.400102] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5 [ 2.516036] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.516061] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.516089] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.516165] ata2.00: ATA-9: Patriot Blast, SAFM22.3, max UDMA/133 [ 2.516166] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.516179] ata1.00: ATA-9: Patriot Blast, SAFM12.2, max UDMA/133 [ 2.516180] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.516272] ata2.00: configured for UDMA/133 [ 2.516289] ata1.00: configured for UDMA/133 [ 2.516423] scsi 0:0:0:0: Direct-Access ATA Patriot Blast 12.2 PQ: 0 ANSI: 5 [ 2.516636] scsi 1:0:0:0: Direct-Access ATA Patriot Blast 22.3 PQ: 0 ANSI: 5 [ 2.519541] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.519542] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.519548] sd 1:0:0:0: [sdb] Write Protect is off [ 2.519550] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.519551] sd 0:0:0:0: [sda] Write Protect is off [ 2.519553] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.519560] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.519563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.519962] sda: sda1 sda2 [ 2.520078] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 2.520084] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.520224] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.520414] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.522093] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133 [ 2.523883] ata4.00: configured for UDMA/133 [ 2.626791] ata3.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133 [ 2.626792] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.671161] ata3.00: configured for UDMA/133 [ 2.671285] scsi 2:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5 [ 2.671648] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.671672] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 2.671730] sd 2:0:0:0: [sdc] Write Protect is off [ 2.671749] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.671848] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.673660] sdc: sdc1 [ 2.675033] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5 [ 2.675969] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.764793] random: fast init done [ 2.848615] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.848627] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.850723] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.704041] tsc: Refined TSC clocksource calibration: 3762.491 MHz [ 3.704053] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6c77de578df, max_idle_ns: 881591172747 ns [ 3.704293] clocksource: Switched to clocksource tsc [ 3.704397] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 3.704403] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 3.704423] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000 [ 3.704716] [TTM] Zone kernel: Available graphics memory: 4059370 kiB [ 3.704716] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.704717] [TTM] Initializing pool allocator [ 3.704720] [TTM] Initializing DMA pool allocator [ 3.704733] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 3.704734] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.704737] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.704738] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.704740] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000 [ 3.704741] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 3.704742] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011380 00000000 [ 3.704743] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011382 00020030 [ 3.704744] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022362 00020010 [ 3.704746] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 3.704747] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010130 [ 3.704748] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261 [ 3.719601] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719602] [drm] Driver supports precise vblank timestamp query. [ 3.720313] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 3.769185] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 3.769186] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.769187] usb usb8: Product: OHCI PCI host controller [ 3.769188] usb usb8: Manufacturer: Linux 4.19.0-10-amd64 ohci_hcd [ 3.769189] usb usb8: SerialNumber: 0000:00:14.5 [ 3.803549] hub 8-0:1.0: USB hub found [ 3.803556] hub 8-0:1.0: 2 ports detected [ 3.804083] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x60000, bo (____ptrval____) [ 3.832975] fbcon: nouveaufb (fb0) is primary device [ 3.846738] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 3.846742] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 3.846758] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000 [ 3.860016] usb 4-3: new high-speed USB device number 2 using ehci-pci [ 3.860026] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 3.887221] Console: switching to colour frame buffer device 200x56 [ 3.888997] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.908073] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 3.908075] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.908076] usb usb9: Product: OHCI PCI host controller [ 3.908077] usb usb9: Manufacturer: Linux 4.19.0-10-amd64 ohci_hcd [ 3.908078] usb usb9: SerialNumber: 0000:00:16.0 [ 3.908128] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.908191] hub 9-0:1.0: USB hub found [ 3.908199] hub 9-0:1.0: 4 ports detected [ 3.927568] device-mapper: uevent: version 1.0.3 [ 3.927631] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-de...@redhat.com [ 4.018248] usb 1-2: New USB device found, idVendor=04a9, idProduct=1737, bcdDevice= 1.05 [ 4.018250] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.018251] usb 1-2: Product: MX330 series [ 4.018252] usb 1-2: Manufacturer: Canon [ 4.018253] usb 1-2: SerialNumber: 31EF20 [ 4.035635] usb 4-3: New USB device found, idVendor=0ac8, idProduct=3450, bcdDevice= 9.00 [ 4.035638] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.035641] usb 4-3: Product: Vimicro USB Camera (Altair) [ 4.035643] usb 4-3: Manufacturer: Vimicro [ 4.252026] raid6: sse2x1 gen() 6465 MB/s [ 4.320022] raid6: sse2x1 xor() 4736 MB/s [ 4.372027] usb 6-3: new low-speed USB device number 2 using ohci-pci [ 4.388025] raid6: sse2x2 gen() 10550 MB/s [ 4.456020] raid6: sse2x2 xor() 7108 MB/s [ 4.524020] raid6: sse2x4 gen() 12504 MB/s [ 4.580063] usb 6-3: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.50 [ 4.580065] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.580066] usb 6-3: Product: Dell QuietKey Keyboard [ 4.580067] usb 6-3: Manufacturer: Dell [ 4.587750] hidraw: raw HID events driver (C) Jiri Kosina [ 4.592024] raid6: sse2x4 xor() 6256 MB/s [ 4.592026] raid6: using algorithm sse2x4 gen() 12504 MB/s [ 4.592026] raid6: .... xor() 6256 MB/s, rmw enabled [ 4.592027] raid6: using ssse3x2 recovery algorithm [ 4.599470] xor: automatically using best checksumming function avx [ 4.601218] usbcore: registered new interface driver usbhid [ 4.601219] usbhid: USB HID core driver [ 4.602560] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/0003:413C:2106.0001/input/input2 [ 4.651701] Btrfs loaded, crc32c=crc32c-intel [ 4.660126] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:12.0-3/input0 [ 4.817510] PM: Image not found (code -22) [ 5.088027] usb 6-4: new low-speed USB device number 3 using ohci-pci [ 5.093804] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 5.265531] systemd[1]: Inserted module 'autofs4' [ 5.282918] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.300077] systemd[1]: Detected architecture x86-64. [ 5.302236] systemd[1]: Set hostname to <lmde>. [ 5.311069] usb 6-4: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 [ 5.311071] usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.311072] usb 6-4: Product: Optical USB Mouse [ 5.311073] usb 6-4: Manufacturer: Logitech [ 5.318336] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.0/0003:046D:C016.0002/input/input3 [ 5.318397] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-4/input0 [ 5.358252] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 5.416622] random: systemd: uninitialized urandom read (16 bytes read) [ 5.417906] random: systemd: uninitialized urandom read (16 bytes read) [ 5.419218] systemd[1]: Listening on Syslog Socket. [ 5.419307] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.419371] systemd[1]: Listening on udev Kernel Socket. [ 5.419430] systemd[1]: Listening on udev Control Socket. [ 5.419487] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.419501] systemd[1]: Reached target Remote File Systems. [ 5.423207] systemd[1]: Listening on Process Core Dump Socket. [ 5.442149] EXT4-fs (sdb2): re-mounted. Opts: (null) [ 5.451180] lp: driver loaded but no devices found [ 5.459688] ppdev: user-space parallel port driver [ 5.544992] audit: type=1400 audit(1598052401.495:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=382 comm="apparmor_parser" [ 5.545243] audit: type=1400 audit(1598052401.495:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=386 comm="apparmor_parser" [ 5.546901] audit: type=1400 audit(1598052401.495:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=388 comm="apparmor_parser" [ 5.546949] audit: type=1400 audit(1598052401.495:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=381 comm="apparmor_parser" [ 5.547117] audit: type=1400 audit(1598052401.495:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=383 comm="apparmor_parser" [ 5.548712] audit: type=1400 audit(1598052401.499:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=389 comm="apparmor_parser" [ 5.548716] audit: type=1400 audit(1598052401.499:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=389 comm="apparmor_parser" [ 5.548864] audit: type=1400 audit(1598052401.499:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=385 comm="apparmor_parser" [ 5.548868] audit: type=1400 audit(1598052401.499:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=385 comm="apparmor_parser" [ 5.548871] audit: type=1400 audit(1598052401.499:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=385 comm="apparmor_parser" [ 5.598808] systemd-journald[337]: Received request to flush runtime journal from PID 1 [ 5.669251] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 5.669512] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 5.669633] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 5.676063] usb 1-5: new high-speed USB device number 5 using ehci-pci [ 5.676120] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.676156] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.676201] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.676234] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 5.694895] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.826080] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.826088] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.840786] usb 1-5: New USB device found, idVendor=03f0, idProduct=3e17, bcdDevice= 1.00 [ 5.840789] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.840791] usb 1-5: Product: HP LaserJet P1006 [ 5.840793] usb 1-5: Manufacturer: Hewlett-Packard [ 5.840794] usb 1-5: SerialNumber: AC161HM [ 5.872358] Adding 8496124k swap on /dev/sdb1. Priority:-2 extents:1 across:8496124k SSFS [ 5.883538] EXT4-fs (sdb5): recovery complete [ 5.883543] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 5.908266] fuse init (API version 7.27) [ 5.934374] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.934376] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.934378] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.934379] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.934380] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 5.934381] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.934383] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 5.934384] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 5.934385] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.992850] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 5.992912] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 5.992969] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 5.993024] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 5.993082] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 5.993138] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.993194] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.993248] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 6.002190] random: crng init done [ 6.002192] random: 7 urandom warning(s) missed due to ratelimiting [ 6.011828] input: BRLTTY 5.6 Linux Screen Driver Keyboard as /devices/virtual/input/input13 [ 6.031921] kvm: Nested Virtualization enabled [ 6.031925] kvm: Nested Paging enabled [ 6.112004] MCE: In-kernel MCE decoding enabled. [ 6.415793] ath: EEPROM regdomain: 0x809c [ 6.415794] ath: EEPROM indicates we should expect a country code [ 6.415795] ath: doing EEPROM country->regdmn map search [ 6.415796] ath: country maps to regdmn code: 0x52 [ 6.415796] ath: Country alpha2 being used: CN [ 6.415797] ath: Regpair used: 0x52 [ 6.424986] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.424988] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.428862] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.429260] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffbbc701940000, irq=20 [ 6.432873] ath9k 0000:03:05.0 wlp3s5: renamed from wlan0 [ 6.533347] media: Linux media interface: v0.10 [ 6.534949] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.534951] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.536519] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1737 [ 6.537346] usblp 1-2:1.2: usblp1: USB Bidirectional printer dev 2 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1737 [ 6.537755] usblp 1-5:1.0: usblp2: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17 [ 6.537790] usbcore: registered new interface driver usblp [ 6.547151] videodev: Linux video capture interface: v2.00 [ 6.581632] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 6.582733] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 6.582948] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 6.594637] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450) [ 6.600286] uvcvideo 4-3:1.0: Entity type for entity Processing 2 was not initialized! [ 6.600288] uvcvideo 4-3:1.0: Entity type for entity Camera 1 was not initialized! [ 6.600290] uvcvideo 4-3:1.0: Entity type for entity Extension 4 was not initialized! [ 6.600364] input: Vimicro USB Camera (Altair): Vi as /devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3:1.0/input/input14 [ 6.600440] usbcore: registered new interface driver uvcvideo [ 6.600440] USB Video Class driver (1.1.1) [ 6.720457] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.720459] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.788608] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.788610] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.793502] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 6.800988] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready [ 6.823553] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready [ 6.857590] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready [ 6.884526] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.884528] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.913075] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready [ 6.976742] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.976743] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 7.396480] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 7.396550] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 7.396610] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17 [ 7.396690] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 7.825018] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready [ 8.717356] wlp3s5: authenticate with 38:d5:47:d9:5e:88 [ 8.748721] wlp3s5: send auth to 38:d5:47:d9:5e:88 (try 1/3) [ 8.751212] wlp3s5: authenticated [ 8.752032] wlp3s5: associate with 38:d5:47:d9:5e:88 (try 1/3) [ 8.758241] wlp3s5: RX AssocResp from 38:d5:47:d9:5e:88 (capab=0x1411 status=0 aid=1) [ 8.758400] wlp3s5: associated [ 8.802619] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s5: link becomes ready [ 9.784608] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.784617] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 9.901124] usblp2: removed [ 11.568048] usblp0: removed [ 11.571425] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1737 [ 11.571499] usblp1: removed [ 11.573449] usblp 1-2:1.2: usblp1: USB Bidirectional printer dev 2 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1737 [ 21.140889] usblp0: removed [ 21.144295] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1737 [ 21.144405] usblp1: removed [ 21.148270] usblp 1-2:1.2: usblp1: USB Bidirectional printer dev 2 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1737 daddio@lmde:~$