Package: src:linux Version: 3.2.35-2 Severity: normal Dear Maintainer,
I'm experiencing what seems to be a kernel bug with read-only remounting of a bind mount (creating a read-only bind mount). After running the following commands, both /foo/dir_ro *and* /foo/dir become read-only: mount --bind /foo/dir /foo/dir_ro mount -o remount,ro /foo/dir_ro Running 'mount -o remount,rw /foo/dir' rectifies the situation, leaving it as I intended (/foo/dir writable, /foo/dir_ro read-only). Thanks, Zev Weiss -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg--ssd-sysroot ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 3.010929] Console: switching to colour frame buffer device 240x75 [ 3.013438] fb0: nouveaufb frame buffer device [ 3.013440] drm: registered panic notifier [ 3.013445] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 3.799556] md: md0 stopped. [ 3.800607] md: bind<sdb> [ 3.800731] md: bind<sde> [ 3.807141] md: raid1 personality registered for level 1 [ 3.807458] bio: create slab <bio-1> at 1 [ 3.807521] md/raid1:md0: active with 2 out of 2 mirrors [ 3.807541] md0: detected capacity change from 0 to 2000264560640 [ 3.835885] md0: unknown partition table [ 3.962862] md: md1 stopped. [ 3.965536] md: bind<sdd> [ 3.965706] md: bind<sda> [ 3.967957] md/raid1:md1: active with 2 out of 2 mirrors [ 3.967976] md1: detected capacity change from 0 to 500106674176 [ 4.024324] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 4.031249] md1: unknown partition table [ 4.251852] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard [ 4.295424] loop: module loaded [ 4.959331] Adding 4194300k swap on /dev/mapper/vg--ssd-swap. Priority:-1 extents:1 across:4194300k SS [ 6.045526] kjournald starting. Commit interval 5 seconds [ 6.045628] EXT3-fs (sdc1): using internal journal [ 6.045632] EXT3-fs (sdc1): mounted filesystem with ordered data mode [ 6.047893] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 6.050170] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 6.122924] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 6.236900] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 6.293508] kjournald starting. Commit interval 5 seconds [ 6.293634] EXT3-fs (dm-5): mounted filesystem with ordered data mode [ 6.331067] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 6.780483] r8169 0000:04:00.0: eth0: link down [ 6.780490] r8169 0000:04:00.0: eth0: link down [ 6.781506] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.163430] r8169 0000:04:00.0: eth0: link up [ 9.164417] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.737732] RPC: Registered named UNIX socket transport module. [ 16.737736] RPC: Registered udp transport module. [ 16.737738] RPC: Registered tcp transport module. [ 16.737740] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.749189] FS-Cache: Loaded [ 16.759249] FS-Cache: Netfs 'nfs' registered for caching [ 16.768939] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 17.790334] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.822734] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 17.925057] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.898599] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 18.898908] NFSD: starting 90-second grace period [ 20.112007] eth0: no IPv6 routers present [ 242.431813] Kprobes globally unoptimized [ 242.468323] stap_7a30e3695e76472eb616ead2970b485_4039: systemtap: 1.7/0.152, base: ffffffffa057e000, memory: 14data/16text/1ctx/2058net/18alloc kb, probes: 1 [ 255.614619] stap_df243a220556068fca70eedb018891c_4194: systemtap: 1.7/0.152, base: ffffffffa0587000, memory: 14data/16text/1ctx/2058net/18alloc kb, probes: 1 [ 337.753052] stap_7dc557923d2612917434539e96d25458_4407: systemtap: 1.7/0.152, base: ffffffffa0590000, memory: 18data/16text/1ctx/2058net/18alloc kb, probes: 1 [ 5682.988021] usb 1-1.1: USB disconnect, device number 3 [ 5687.028095] usb 1-1.1: new low-speed USB device number 5 using ehci_hcd [ 5687.124839] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016 [ 5687.124843] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5687.124846] usb 1-1.1: Product: Optical USB Mouse [ 5687.124849] usb 1-1.1: Manufacturer: Logitech [ 5687.127314] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input6 [ 5687.127474] generic-usb 0003:046D:C016.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.7-1.1/input0 [ 5715.476089] usb 1-1: USB disconnect, device number 2 [ 5715.476092] usb 1-1.1: USB disconnect, device number 5 [ 5715.504273] usb 1-1.2: USB disconnect, device number 4 [ 5722.360025] usb 1-1: new high-speed USB device number 6 using ehci_hcd [ 5722.500589] usb 1-1: New USB device found, idVendor=05ac, idProduct=1006 [ 5722.500593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5722.500596] usb 1-1: Product: Keyboard Hub [ 5722.500598] usb 1-1: Manufacturer: Apple, Inc. [ 5722.500600] usb 1-1: SerialNumber: 000000000000 [ 5722.501062] hub 1-1:1.0: USB hub found [ 5722.501212] hub 1-1:1.0: 3 ports detected [ 5722.772099] usb 1-1.1: new low-speed USB device number 7 using ehci_hcd [ 5722.868722] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016 [ 5722.868726] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5722.868729] usb 1-1.1: Product: Optical USB Mouse [ 5722.868731] usb 1-1.1: Manufacturer: Logitech [ 5722.871080] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input7 [ 5722.871214] generic-usb 0003:046D:C016.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.7-1.1/input0 [ 5722.940105] usb 1-1.2: new low-speed USB device number 8 using ehci_hcd [ 5723.038597] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=0220 [ 5723.038601] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5723.038604] usb 1-1.2: Product: Apple Keyboard [ 5723.038606] usb 1-1.2: Manufacturer: Apple, Inc [ 5723.042403] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input8 [ 5723.042572] apple 0003:05AC:0220.0006: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-1.2/input0 [ 5723.045412] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.1/input/input9 [ 5723.045546] apple 0003:05AC:0220.0007: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-1.2/input1 [13112.430445] fuse init (API version 7.17) [15272.292052] EXT4-fs (dm-6): re-mounted. Opts: user_xattr,barrier=1,data=ordered [15336.714473] EXT4-fs (dm-6): re-mounted. Opts: (null) [17915.629783] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [17915.845612] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered [17999.890399] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered [18014.494823] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered [35222.291844] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [35222.473823] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered [36017.085217] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered [36020.371216] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,barrier=1,data=ordered ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: P35-DS3R product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F4 board_vendor: Gigabyte Technology Co., Ltd. board_name: P35-DS3R board_version: x.x ** Loaded modules: fuse ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT xt_comment xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack binfmt_misc iptable_filter ip_tables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext3 jbd loop raid1 kvm_intel kvm md_mod snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device coretemp snd_timer pcspkr nouveau serio_raw iTCO_wdt i2c_i801 iTCO_vendor_support snd mxm_wmi wmi evdev video parport_pc parport ttm drm_kms_helper drm i2c_algo_bit i2c_core soundcore acpi_cpufreq mperf button processor thermal_sys ext4 crc16 jbd2 mbcache dm_mod sr_mod hid_apple sg cdrom sd_mod crc_t10dif usbhid hid ata_generic pata_jmicron ata_piix ahci libahci r8169 mii uhci_hcd ehci_hcd libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f4000000-f7ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at d100 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d200 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fa700000-fa8fffff Prefetchable memory behind bridge: 00000000fa900000-00000000faafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa000000-fa0fffff Prefetchable memory behind bridge: 00000000fa500000-00000000fa6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000fa200000-00000000fa4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d300 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d500 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 00009000-00009fff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d600 [size=8] Region 1: I/O ports at d700 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d900 [size=4] Region 4: I/O ports at da00 [size=16] Region 5: I/O ports at db00 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fa106000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at dd00 [size=8] Region 1: I/O ports at de00 [size=4] Region 2: I/O ports at df00 [size=8] Region 3: I/O ports at e000 [size=4] Region 4: I/O ports at e100 [size=16] Region 5: I/O ports at e200 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:3445] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at a000 [size=128] [virtual] Expansion ROM at f7000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at b100 [size=4] Region 2: I/O ports at b200 [size=8] Region 3: I/O ports at b300 [size=4] Region 4: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at c000 [size=256] Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fa200000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 006: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard Bus 001 Device 007: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse Bus 001 Device 008: ID 05ac:0220 Apple, Inc. Aluminum Keyboard (ANSI) -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-26 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130128103747.30240.90764.report...@hatter.bewilderbeest.net