Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-4 Followup-For: Bug #494162
Ah, so this is why Amarok skips and stutters whenever I switch tabs (or do anything, really), today. Sure enough, in 2.6.25 all is fine. Any chance more attention (higher severity?) might be put on this? It's pretty jarring to the user, and does a complete disservice to the perception of ability of Linux on the desktop. It would be very unfortunate (sadly laughable, IMO) if Lenny were released with this bug. Peace, Brendon -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008 ** Command line: root=/dev/sda2 ro ** Tainted: P (1) ** Kernel log: [ 637.136658] lp: driver loaded but no devices found [ 637.172657] ppdev: user-space parallel port driver [ 641.251572] warning: `vdr-kbd' uses 32-bit capabilities (legacy support in use) [ 643.665742] Clocksource tsc unstable (delta = -64455037 ns) [ 663.376333] NET: Registered protocol family 10 [ 663.376592] lo: Disabled Privacy Extensions [ 667.905023] em8300_audio.o: Analog audio enabled [ 667.944707] em8300: Microcode version 0x29 loaded [ 668.063884] em8300_audio.o: Analog audio enabled [ 673.520942] eth0: no IPv6 routers present [ 673.741577] nvidia: module license 'NVIDIA' taints kernel. [ 674.000331] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 674.000331] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16 [ 674.000331] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 674.000331] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 [16522.763644] Fifo still full, trying stop [16700.139060] Fifo still full, trying stop [17665.971913] Fifo still full, trying stop [24354.029646] Fifo still full, trying stop [24555.619339] Fifo still full, trying stop [24807.278183] Fifo still full, trying stop [25008.840091] Fifo still full, trying stop [25256.361998] Fifo still full, trying stop [25464.478505] Fifo still full, trying stop [25715.716610] Fifo still full, trying stop [25918.938454] Fifo still full, trying stop [26336.103227] Fifo still full, trying stop [26752.448319] Fifo still full, trying stop [27576.644277] Fifo still full, trying stop [27782.249854] Fifo still full, trying stop [28002.450206] Fifo still full, trying stop [28207.518000] Fifo still full, trying stop [28489.782104] Fifo still full, trying stop [28690.962251] Fifo still full, trying stop [29077.534065] Fifo still full, trying stop [29328.228252] Fifo still full, trying stop [36452.417366] gtk-gnash[9009]: segfault at 0 ip 7f21eee495c6 sp 7ffffc63f150 error 4 in libfontconfig.so.1.3.0[7f21eee36000+2e000] [36841.088035] usb 2-10: new high speed USB device using ehci_hcd and address 7 [36841.245466] usb 2-10: configuration #1 chosen from 1 choice [36841.253612] usb 2-10: New USB device found, idVendor=04b8, idProduct=0827 [36841.253617] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [36841.253620] usb 2-10: Product: USB2.0 MFP(Hi-Speed) [36841.253621] usb 2-10: Manufacturer: EPSON [36841.253623] usb 2-10: SerialNumber: L41010610150256440 [36841.551211] usblp0: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0827 [36841.551211] usbcore: registered new interface driver usblp [36841.589474] Initializing USB Mass Storage driver... [36841.595211] scsi6 : SCSI emulation for USB Mass Storage devices [36841.595497] usbcore: registered new interface driver usb-storage [36841.595503] USB Mass Storage support registered. [36841.602512] usb-storage: device found at 7 [36841.602518] usb-storage: waiting for device to settle before scanning [36847.221828] usb-storage: device scan complete [36847.228855] scsi 6:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [36847.241073] sd 6:0:0:0: [sdc] Attached SCSI removable disk [36881.435534] sd 6:0:0:0: [sdc] 29120 512-byte hardware sectors (15 MB) [36881.455368] sd 6:0:0:0: [sdc] Write Protect is off [36881.455373] sd 6:0:0:0: [sdc] Mode Sense: 2f 00 00 00 [36881.455375] sd 6:0:0:0: [sdc] Assuming drive cache: write through [36881.483366] sd 6:0:0:0: [sdc] 29120 512-byte hardware sectors (15 MB) [36881.500498] sd 6:0:0:0: [sdc] Write Protect is off [36881.500502] sd 6:0:0:0: [sdc] Mode Sense: 2f 00 00 00 [36881.500504] sd 6:0:0:0: [sdc] Assuming drive cache: write through [36881.500510] sdc:<3>Buffer I/O error on device sdc, logical block 0 [36881.500564] Buffer I/O error on device sdc, logical block 0 [36881.500572] Buffer I/O error on device sdc, logical block 0 [36881.500579] Buffer I/O error on device sdc, logical block 0 [36881.500586] Buffer I/O error on device sdc, logical block 0 [36881.500590] ldm_validate_partition_table(): Disk read failed. [36881.500595] Buffer I/O error on device sdc, logical block 0 [36881.500602] Buffer I/O error on device sdc, logical block 0 [36881.500608] Buffer I/O error on device sdc, logical block 0 [36881.500615] Buffer I/O error on device sdc, logical block 0 [36881.500618] Dev sdc: unable to read RDB block 0 [36881.500623] Buffer I/O error on device sdc, logical block 0 [36881.500645] unable to read partition table [36881.524602] sd 6:0:0:0: [sdc] 29120 512-byte hardware sectors (15 MB) [36881.536601] sd 6:0:0:0: [sdc] Write Protect is off [36881.536607] sd 6:0:0:0: [sdc] Mode Sense: 2f 00 00 00 [36881.536609] sd 6:0:0:0: [sdc] Assuming drive cache: write through [36881.546811] sd 6:0:0:0: [sdc] 29120 512-byte hardware sectors (15 MB) [36881.558810] sd 6:0:0:0: [sdc] Write Protect is off [36881.558817] sd 6:0:0:0: [sdc] Mode Sense: 2f 00 00 00 [36881.558819] sd 6:0:0:0: [sdc] Assuming drive cache: write through [36881.558822] sdc: sdc1 [36914.895839] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [36933.669499] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [36937.209275] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [36967.175974] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37027.114045] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37038.857790] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37052.407736] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37070.688054] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37375.303974] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37418.749704] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [37440.119419] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [38889.812183] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [39399.311071] usb 2-10: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [40128.867755] usb 2-10: USB disconnect, address 7 [40128.869231] usblp0: removed ** Loaded modules: Module Size Used by usb_storage 94400 0 usblp 16896 0 nvidia 8105072 34 binfmt_misc 13580 1 ipv6 288200 16 ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp video 24084 0 output 7808 1 video ac 9352 0 battery 16904 0 xfs 475432 1 fuse 53184 3 snd_seq_dummy 7428 0 snd_seq_oss 33152 0 snd_seq_midi 11072 0 snd_rawmidi 26784 1 snd_seq_midi snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi snd_seq 54304 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq cpufreq_userspace 8452 1 powernow_k8 17156 1 freq_table 9344 1 powernow_k8 it87 28696 0 hwmon_vid 7296 1 it87 sbp2 25356 0 loop 19468 0 dvb_pll 13704 1 mt352 10884 1 em8300 80976 8 cx88_dvb 21764 10 cx88_vp3054_i2c 7168 1 cx88_dvb videobuf_dvb 9604 1 cx88_dvb dvb_core 82740 2 cx88_dvb,videobuf_dvb snd_hda_intel 434776 5 adv717x 13744 1 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_pcm 81800 4 em8300,snd_hda_intel,snd_pcm_oss snd_timer 25744 3 snd_seq,snd_pcm cx8802 20228 1 cx88_dvb joydev 14848 0 button 11680 0 cx8800 37396 0 cx88xx 73256 3 cx88_dvb,cx8802,cx8800 snd 63688 19 snd_seq_oss,snd_rawmidi,snd_seq,snd_seq_device,em8300,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ir_common 47108 1 cx88xx i2c_algo_bit 10244 3 em8300,cx88_vp3054_i2c,cx88xx firmware_class 12544 1 em8300 tveeprom 18052 1 cx88xx compat_ioctl32 12288 1 cx8800 videodev 35840 3 cx8800,cx88xx,compat_ioctl32 v4l1_compat 17284 1 videodev v4l2_common 16384 1 cx8800 videobuf_dma_sg 17412 4 cx88_dvb,cx8802,cx8800,cx88xx videobuf_core 23300 5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg btcx_risc 9096 3 cx8802,cx8800,cx88xx i2c_nforce2 10752 0 psmouse 42268 0 i2c_core 27936 11 nvidia,dvb_pll,mt352,em8300,cx88_vp3054_i2c,adv717x,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_nforce2 wacom 22144 0 soundcore 12064 2 em8300,snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm serio_raw 9860 0 k8temp 9216 0 evdev 14208 6 pcspkr 7040 0 ext3 124688 1 jbd 51240 1 ext3 mbcache 12804 1 ext3 ide_cd_mod 36360 0 cdrom 37928 1 ide_cd_mod usbhid 45792 1 hid 41792 1 usbhid ff_memless 9224 1 usbhid sd_mod 29376 6 amd74xx 13448 0 [permanent] ide_pci_generic 9220 0 [permanent] ide_core 128284 3 ide_cd_mod,amd74xx,ide_pci_generic floppy 61672 0 forcedeth 54032 0 ohci1394 32564 0 ieee1394 93816 2 sbp2,ohci1394 ata_generic 10116 0 sata_nv 27528 4 libata 165472 2 ata_generic,sata_nv scsi_mod 160760 4 usb_storage,sbp2,sd_mod,libata dock 14112 1 libata ehci_hcd 36108 0 ohci_hcd 25092 0 thermal 22688 0 processor 42304 2 powernow_k8,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at fc00 [size=64] Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at 1c40 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:036a] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE Kernel modules: ata_generic, ide-pci-generic, amd74xx 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at dc00 [size=16] Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv, ata_generic, ide-pci-generic 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv, ata_generic, ide-pci-generic 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 23 Region 0: I/O ports at c400 [size=8] Region 1: I/O ports at c000 [size=4] Region 2: I/O ports at bc00 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv, ata_generic, ide-pci-generic 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: fa000000-fcffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+ Capabilities: <access denied> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81f6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 1273 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b000 [size=8] Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ac00 [size=8] Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00008000-00009fff Memory behind bridge: fde00000-fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: f6000000-f9ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:06.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: DViCO Corporation Device [18ac:db10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx8800 Kernel modules: cx8800 01:06.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: DViCO Corporation Device [18ac:db10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx88-mpeg driver manager Kernel modules: cx8802 01:07.0 Multimedia controller [0480]: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder [1105:8300] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 17 Region 0: Memory at fce00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: Sigma Designs EM8300 Kernel modules: em8300 01:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10) Subsystem: ASUSTeK Computer Inc. Device [1043:808b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fcfff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fcff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 07:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600 GT [10de:0402] (rev a1) Subsystem: Giga-byte Technology Device [1458:3447] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 7c00 [size=128] [virtual] Expansion ROM at f9fe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-46 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]