Your message dated Sun, 30 May 2010 14:44:13 +0200
with message-id <20100530124413.gd2...@galadriel.inutil.org>
and subject line Re: linux-image-2.6.26-1-686: Framebuffer goes blank after X
start
has caused the Debian Bug report #504138,
regarding linux-image-2.6.26-1-686: Framebuffer goes blank after X start
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
504138: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=504138
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-9
Severity: normal
After starting X server all tty framebuffers go blank. Before X start,
framebuffer display boot process normally
though. It seems vesafb kernel module is not loaded at boot, resulting
in the blank framebuffers.
The problem does not appear in version 2.6.26.8.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-9) (wa...@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Oct
18 16:22:25 UTC 2008
** Command line:
root=/dev/sda5 ro quiet vga=792 splash acpi_sleep=s3_bios
** Not tainted
** Kernel log:
[ 68.894667] PM: Writing back config space on device 0000:03:00.0 at
offset 1 (was 100102, writing 100106)
[ 68.894667] firmware: requesting iwlwifi-3945-1.ucode
[ 69.033278] Registered led device: iwl-phy0:radio
[ 69.033278] Registered led device: iwl-phy0:assoc
[ 69.033278] Registered led device: iwl-phy0:RX
[ 69.033278] Registered led device: iwl-phy0:TX
[ 71.193352] NET: Registered protocol family 10
[ 71.193352] lo: Disabled Privacy Extensions
[ 71.193352] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 71.193352] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
[ 72.354378] CPU0 attaching NULL sched-domain.
[ 72.354378] CPU1 attaching NULL sched-domain.
[ 72.357935] CPU0 attaching sched-domain:
[ 72.357944] domain 0: span 0-1
[ 72.357948] groups: 0 1
[ 72.357956] domain 1: span 0-1
[ 72.357960] groups: 0-1
[ 72.357966] CPU1 attaching sched-domain:
[ 72.357970] domain 0: span 0-1
[ 72.357974] groups: 1 0
[ 72.357980] domain 1: span 0-1
[ 72.357984] groups: 0-1
[ 248.682451] CPU0 attaching NULL sched-domain.
[ 248.682451] CPU1 attaching NULL sched-domain.
[ 248.688228] CPU0 attaching sched-domain:
[ 248.688234] domain 0: span 0-1
[ 248.688237] groups: 0 1
[ 248.688247] CPU1 attaching sched-domain:
[ 248.688251] domain 0: span 0-1
[ 248.688256] groups: 1 0
[ 253.616093] wlan0_rename: Initial auth_alg=0
[ 253.616100] wlan0_rename: authenticate with AP 00:10:c6:f2:4f:e5
[ 253.618879] wlan0_rename: RX authentication from 00:10:c6:f2:4f:e5
(alg=0 transaction=2 status=0)
[ 253.618885] wlan0_rename: authenticated
[ 253.618888] wlan0_rename: associate with AP 00:10:c6:f2:4f:e5
[ 253.623222] wlan0_rename: RX AssocResp from 00:10:c6:f2:4f:e5
(capab=0x411 status=0 aid=1)
[ 253.623227] wlan0_rename: associated
[ 253.623237] wlan0_rename: switched to short barker preamble
(BSSID=00:10:c6:f2:4f:e5)
[ 253.630740] ADDRCONF(NETDEV_CHANGE): wlan0_rename: link becomes ready
[ 269.011180] wlan0_rename: no IPv6 routers present
[ 651.686769] CE: hpet increasing min_delta_ns to 15000 nsec
[ 3224.843319] CPU0 attaching NULL sched-domain.
[ 3224.843319] CPU1 attaching NULL sched-domain.
[ 3224.847343] CPU0 attaching sched-domain:
[ 3224.847352] domain 0: span 0-1
[ 3224.847356] groups: 0 1
[ 3224.847363] domain 1: span 0-1
[ 3224.847367] groups: 0-1
[ 3224.847373] CPU1 attaching sched-domain:
[ 3224.847377] domain 0: span 0-1
[ 3224.847381] groups: 1 0
[ 3224.847387] domain 1: span 0-1
[ 3224.847391] groups: 0-1
[ 3229.368885] wlan0_rename: No ProbeResp from current AP
00:10:c6:f2:4f:e5 - assume out of range
[ 3229.728578] CPU0 attaching NULL sched-domain.
[ 3229.728585] CPU1 attaching NULL sched-domain.
[ 3229.732521] CPU0 attaching sched-domain:
[ 3229.732521] domain 0: span 0-1
[ 3229.732521] groups: 0 1
[ 3229.732521] CPU1 attaching sched-domain:
[ 3229.732521] domain 0: span 0-1
[ 3229.732521] groups: 1 0
[ 3231.043710] CPU0 attaching NULL sched-domain.
[ 3231.043719] CPU1 attaching NULL sched-domain.
[ 3231.065746] CPU0 attaching sched-domain:
[ 3231.065746] domain 0: span 0-1
[ 3231.065746] groups: 0 1
[ 3231.065746] domain 1: span 0-1
[ 3231.065746] groups: 0-1
[ 3231.065746] CPU1 attaching sched-domain:
[ 3231.065746] domain 0: span 0-1
[ 3231.065746] groups: 1 0
[ 3231.065746] domain 1: span 0-1
[ 3231.065746] groups: 0-1
[ 3239.628956] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 3239.630312] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 3239.630486] PM: Writing back config space on device 0000:03:00.0 at
offset 1 (was 100102, writing 100106)
[ 3239.674448] Registered led device: iwl-phy0:radio
[ 3239.674448] Registered led device: iwl-phy0:assoc
[ 3239.674448] Registered led device: iwl-phy0:RX
[ 3239.674448] Registered led device: iwl-phy0:TX
[ 3239.675916] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
[ 3242.389676] CPU0 attaching NULL sched-domain.
[ 3242.389684] CPU1 attaching NULL sched-domain.
[ 3242.393751] CPU0 attaching sched-domain:
[ 3242.393751] domain 0: span 0-1
[ 3242.393751] groups: 0 1
[ 3242.393751] CPU1 attaching sched-domain:
[ 3242.393751] domain 0: span 0-1
[ 3242.393751] groups: 1 0
[ 3341.151693] wlan0_rename: Initial auth_alg=0
[ 3341.151693] wlan0_rename: authenticate with AP 00:10:c6:f2:4f:e5
[ 3341.157272] wlan0_rename: RX authentication from 00:10:c6:f2:4f:e5
(alg=0 transaction=2 status=0)
[ 3341.157272] wlan0_rename: authenticated
[ 3341.157272] wlan0_rename: associate with AP 00:10:c6:f2:4f:e5
[ 3341.159379] wlan0_rename: RX AssocResp from 00:10:c6:f2:4f:e5
(capab=0x411 status=0 aid=1)
[ 3341.159379] wlan0_rename: associated
[ 3341.159379] wlan0_rename: switched to short barker preamble
(BSSID=00:10:c6:f2:4f:e5)
[ 3341.159379] ADDRCONF(NETDEV_CHANGE): wlan0_rename: link becomes ready
[ 3358.529184] wlan0_rename: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 235300 14
rfcomm 28272 2
l2cap 17248 5 rfcomm
bluetooth 44900 4 rfcomm,l2cap
vboxdrv 63648 0
uinput 6592 1
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
sbp2 18572 0
loop 12748 0
pcmcia 29548 0
psmouse 32336 0
serio_raw 4740 0
snd_hda_intel 324248 1
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
arc4 1824 2
pcspkr 2432 0
i2c_i801 7920 0
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
rng_core 3940 0
iTCO_wdt 9508 0
i2c_core 19828 1 i2c_i801
battery 10180 0
video 16400 0
ac 4196 0
ecb 2624 2
output 2912 1 video
bay 4160 0
crypto_blkcipher 15236 1 ecb
snd_pcm 62596 1 snd_hda_intel
snd_seq 41456 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
iwl3945 78772 0
firmware_class 6816 2 pcmcia,iwl3945
snd 45604 7
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
mac80211 139680 1 iwl3945
soundcore 6368 1 snd
button 6064 0
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
cfg80211 21576 2 iwl3945,mac80211
intel_agp 22300 1
agpgart 28776 2 intel_agp
thinkpad_acpi 49632 0
led_class 3908 2 iwl3945,thinkpad_acpi
nvram 7116 2 thinkpad_acpi
evdev 8000 8
reiserfs 189920 2
sd_mod 22200 4
ide_pci_generic 3908 0 [permanent]
ide_core 96168 1 ide_pci_generic
ata_piix 14180 3
ohci1394 24944 0
sdhci 13060 0
ieee1394 75800 2 sbp2,ohci1394
mmc_core 39932 1 sdhci
ata_generic 4676 0
libata 140384 2 ata_piix,ata_generic
scsi_mod 129356 3 sbp2,sd_mod,libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 3 ehci_hcd,uhci_hcd
e1000e 84612 0
dock 8272 2 bay,libata
thermal 15228 0
processor 32576 3 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev
03)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2017]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
945GM/GMS, 943/940GML Express Integrated Graphics Controller
[8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:201a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile
945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
[8086:27a6] (rev 03)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:201a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family)
High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ee000000-ee0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00006fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
I/O behind bridge: 00007000-00008fff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: e4300000-e7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7
Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Lenovo Thinkpad T60 model 2007 [17aa:200e]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit
Ethernet Controller [8086:109a]
Subsystem: Lenovo ThinkPad X60s [17aa:207e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
3945ABG [Golan] Network Connection [8086:4227] (rev 02)
Subsystem: Intel Corporation ThinkPad R60e/X60s [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 219
Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4)
Subsystem: Lenovo Thinkpad X60s [17aa:201c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: e0000000-e3fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00009000-000090ff
I/O window 1: 00009400-000094ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
Controller [1180:0552] (rev 09) (prog-if 10 [OHCI])
Subsystem: Lenovo Thinkpad X60s [17aa:201e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e4301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18)
Subsystem: Lenovo Thinkpad X60s [17aa:201d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
pn libc6-i686 <none> (no description available)
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---
--- Begin Message ---
Version: 2.6.32-1
On Fri, Oct 31, 2008 at 11:20:35PM +0100, Apelete Seketeli wrote:
> Package: linux-image-2.6.26-1-686
> Version: 2.6.26-9
> Severity: normal
>
> After starting X server all tty framebuffers go blank. Before X start,
> framebuffer display boot process normally
> though. It seems vesafb kernel module is not loaded at boot, resulting
> in the blank framebuffers.
> The problem does not appear in version 2.6.26.8.
In Squeeze the handling of the ttys is done through the Intel KMS code,
closing the bug.
If there are remainign problems with the current 2.6.32 kernels, please
file a new bug.
Cheers,
Moritz
--- End Message ---