Your message dated Sat, 30 Apr 2011 00:45:56 +0200
with message-id <20110429224555.GA3757@pisco.westfalen.local>
and subject line Re: rt2860: rt2860 doesn't connect to WPA2 networks
has caused the Debian Bug report #581525,
regarding rt2860: rt2860 doesn't connect to WPA2 networks
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
581525: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581525
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-5
Severity: important
File: rt2860
It seems it's not possible to connect to WPA2 wireless networks with the
squeezix version of the rt2860 module.
I've tested it with both network-manager and wicd. Both of them are unable to
authenticate with the correct password.
Both have NO problems to connect to WPA-PSK networks.
Tested with a Buffalo WZR-HP-G300NH router. No problem connecting to that WPA2
network with other devices.
The router encryption is set to WPA/WPA2-Mixed TKIP+AES, using a preshared key.
Tested also after updating the rt2860 firmware-ralink to the Debian SID version
(v0.24). No luck, either.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
root=/dev/sda2
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 37.592358] domain 0: span 0-1 level SIBLING
[ 37.592370] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 37.592399] domain 1: span 0-1 level MC
[ 37.592412] groups: 0-1 (cpu_power = 1178)
[ 38.332372] integrated sync not supported
[ 38.485552] integrated sync not supported
[ 38.628599] integrated sync not supported
[ 102.927298] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 103.092088] RX DESC f6392000 size = 2048
[ 103.092669] <-- RTMPAllocTxRxRingMemory, Status=0
[ 103.096998] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 103.097024] 1. Phy Mode = 0
[ 103.097031] 2. Phy Mode = 0
[ 103.118425] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 103.124896] 3. Phy Mode = 0
[ 103.129534] MCS Set = 00 00 00 00 00
[ 103.131161] <==== RTMPInitialize, Status=0
[ 103.131236] 0x1300 = 00073200
[ 113.752162] wlan0: no IPv6 routers present
[ 157.719928] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[ 194.623011] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 194.634711] RX DESC f6392000 size = 2048
[ 194.635424] <-- RTMPAllocTxRxRingMemory, Status=0
[ 194.639958] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 194.639974] 1. Phy Mode = 0
[ 194.639981] 2. Phy Mode = 0
[ 194.668230] 3. Phy Mode = 0
[ 194.672891] MCS Set = 00 00 00 00 00
[ 194.674519] <==== RTMPInitialize, Status=0
[ 194.674595] 0x1300 = 000a4260
[ 195.053307] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 195.053485] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 195.054063] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 195.054537] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 195.142556] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 195.158459] RX DESC f661d000 size = 2048
[ 195.159166] <-- RTMPAllocTxRxRingMemory, Status=0
[ 195.167205] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 195.167221] 1. Phy Mode = 0
[ 195.167229] 2. Phy Mode = 0
[ 195.195907] 3. Phy Mode = 0
[ 195.200554] MCS Set = 00 00 00 00 00
[ 195.202229] <==== RTMPInitialize, Status=0
[ 195.202306] 0x1300 = 000a4260
[ 197.569091] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 197.648862] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 170
[ 197.649496] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 205.812139] eth0: no IPv6 routers present
[ 205.980160] wlan0: no IPv6 routers present
[ 207.662726] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[ 207.663032] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 217.670142] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[ 217.670444] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 227.682863] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[ 227.683174] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 233.250889] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 233.264040] RX DESC f63ad000 size = 2048
[ 233.264793] <-- RTMPAllocTxRxRingMemory, Status=0
[ 233.268723] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 233.268735] 1. Phy Mode = 0
[ 233.268740] 2. Phy Mode = 0
[ 233.296695] 3. Phy Mode = 0
[ 233.301337] MCS Set = 00 00 00 00 00
[ 233.302960] <==== RTMPInitialize, Status=0
[ 233.303035] 0x1300 = 000a4260
[ 233.579715] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 233.579926] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 233.580565] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 233.581217] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 243.988150] eth0: no IPv6 routers present
[ 266.659913] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 266.672411] RX DESC f6333000 size = 2048
[ 266.672991] <-- RTMPAllocTxRxRingMemory, Status=0
[ 266.677377] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 266.677389] 1. Phy Mode = 0
[ 266.677395] 2. Phy Mode = 0
[ 266.705257] 3. Phy Mode = 0
[ 266.709891] MCS Set = 00 00 00 00 00
[ 266.711516] <==== RTMPInitialize, Status=0
[ 266.711591] 0x1300 = 000a4260
[ 266.757927] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 266.770206] RX DESC f6685000 size = 2048
[ 266.770781] <-- RTMPAllocTxRxRingMemory, Status=0
[ 266.774689] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 266.774706] 1. Phy Mode = 0
[ 266.774713] 2. Phy Mode = 0
[ 266.802662] 3. Phy Mode = 0
[ 266.807312] MCS Set = 00 00 00 00 00
[ 266.808939] <==== RTMPInitialize, Status=0
[ 266.809036] 0x1300 = 000a4260
[ 267.075685] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 267.075897] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 267.076535] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 267.077184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 267.253971] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 267.254180] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 267.254813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 267.255463] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 277.381066] wlan0: no IPv6 routers present
[ 277.540150] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
i915 217023 2
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 0
l2cap 21677 6 bnep,rfcomm
bluetooth 36259 6 sco,bnep,rfcomm,l2cap
loop 9721 0
snd_hda_codec_realtek 162851 1
snd_hda_intel 15263 0
joydev 6771 0
snd_hda_codec 45998 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
uvcvideo 45194 0
snd_pcm 47350 2 snd_hda_intel,snd_hda_codec
videodev 25445 1 uvcvideo
snd_seq 35303 0
v4l1_compat 10250 2 uvcvideo,videodev
rt2860sta 378387 1
eeepc_laptop 9355 0
snd_timer 12258 2 snd_pcm,snd_seq
i2c_core 12612 4 i915,drm,i2c_algo_bit,videodev
snd_seq_device 3673 1 snd_seq
rfkill 10196 4 bluetooth,eeepc_laptop
crc_ccitt 1039 1 rt2860sta
ac 1640 0
battery 3782 0
snd 33551 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rng_core 2178 0
processor 25803 2
soundcore 3450 1 snd
psmouse 44409 0
pci_hotplug 18065 1 eeepc_laptop
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
serio_raw 2916 0
evdev 5609 24
ext4 254301 1
mbcache 3762 1 ext4
jbd2 55835 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 25717 2
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
ide_pci_generic 1924 0
ide_core 63850 1 ide_pci_generic
uhci_hcd 15953 0
ata_piix 16513 1
ehci_hcd 27230 0
libata 113728 2 ata_generic,ata_piix
intel_agp 20145 1
video 14605 1 i915
atl1e 23008 0
scsi_mod 101073 2 sd_mod,libata
usbcore 97930 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
output 1204 1 video
agpgart 19516 2 drm,intel_agp
button 3598 1 i915
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
Subsystem: RaLink Device [1814:2790]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2860
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros
AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam /
CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.24 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686:
true
linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686:
false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686:
true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
--- End Message ---
--- Begin Message ---
On Sat, Apr 23, 2011 at 01:35:57PM +0200, MÃguel wrote:
> It seems it was due to a conflict between the rt2870sta and the rt2800pci
> modules.
>
> Blacklisting rt2870sta solved the problem (both in Debian an Ubuntu).
>
> Sorry for not asking to close the bug report before.
Closing the bug.
Cheers,
Moritz
--- End Message ---