--- Begin Message ---
Package: src:linux
Version: 3.8.11-1
Severity: important
Dear Maintainer,
Boot process with linux 3.8 stops with message that root device wasn't found
and I should check kernel command line or increase timeout required for root
device get ready. Also it opens busybox where I can do something to fix the
issue.
If I run ls /sys/block I see only sda, sdb and sr0. While in "good" system
there sh'ld also present dm-0 (root) and dm-1 (swap).
If I run scripts/local-top/lvm2 I see message like
[ 90.701171] bio: create slab <bio-1> at 1
Now I leave console and boot process continues successfully.
In dmesg for linux 3.2 I can see that device-mapper shows it's messages after
sda & sdb get ready, but in 3.8 they are in the middle of the process. So I
added line "sleep 1" into scripts/local-top/lvm2 before "modprobe -q dm-mod"
(and so before 'activate_vg "$ROOT"'), it helped.
Dmesg for system loaded by hands is attached.
-- Package-specific info:
** Version:
Linux version 3.8-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2
(Debian 4.7.2-5) ) #1 SMP Debian 3.8.11-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.8-1-amd64 root=/dev/mapper/globus-root ro
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-MA69VM-S2
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-MA69VM-S2
board_version:
** Loaded modules:
ip6table_filter
ip6_tables
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
ipt_REJECT
xt_multiport
xt_recent
nf_conntrack_ipv4
nf_defrag_ipv4
iptable_filter
binfmt_misc
xt_conntrack
nf_conntrack_ftp
nf_conntrack
xt_TCPMSS
xt_tcpmss
xt_tcpudp
iptable_mangle
ip_tables
x_tables
pppoe
pppox
ppp_generic
slhc
bridge
stp
llc
ext2
mbcache
it87
hwmon_vid
rtl8180
mac80211
cfg80211
rfkill
eeprom_93cx6
loop
fuse
ecryptfs
dm_crypt
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
sp5100_tco
fglrx(PO)
snd_seq_device
i2c_piix4
snd_timer
powernow_k8
snd
kvm_amd
serio_raw
kvm
soundcore
i2c_core
processor
parport_pc
parport
pcspkr
k8temp
edac_mce_amd
edac_core
thermal_sys
button
evdev
reiserfs
hid_generic
usbhid
hid
sg
sr_mod
cdrom
sd_mod
crc_t10dif
dm_mirror
dm_region_hash
dm_log
dm_mod
ata_generic
r8169
mii
ahci
libahci
pata_atiixp
ehci_pci
ohci_hcd
ehci_hcd
libata
usbcore
usb_common
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host
Bridge [1002:7910]
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to
PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600
Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Gigabyte GA-MA69G-S3H Motherboard
[1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 14)
Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard
[1458:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE
[1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Gigabyte GA-MA69G-S3H Motherboard
[1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383]
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to
LPC Bridge [1002:438d]
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
Cape Verde PRO [Radeon HD 7700 Series] [1002:683f] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e213]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at ee00 [size=256]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Device
[1002:aab0]
Subsystem: PC Partner Limited Device [174b:aab0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: Giga-byte Technology GA-MA69G-S3H Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at fdeff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 003: ID 09da:0260 A4 Tech Co., Ltd KV-300H Isolation Keyboard
Bus 001 Device 004: ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse
H3003 / Trust Optical USB MultiColour Mouse MI-2330
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=be_BY.UTF-8, LC_CTYPE=be_BY.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.8-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.8-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u2
ii grub-pc 2.00-10
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8-1-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.11-1
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8-1-amd64
root=/dev/mapper/globus-root ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA69VM-S2/GA-MA69VM-S2,
BIOS F8 03/03/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00CFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 5 base 0140000000 mask FFE0000000 write-back
[ 0.000000] 6 base 0160000000 mask FFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000170000000 aka 5888M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5140-0x000f514f] mapped at
[ffff8800000f5140]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
[ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem
0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x16fffffff]
[ 0.000000] [mem 0x100000000-0x16fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x16fffffff @ [mem
0xcfedd000-0xcfedffff]
[ 0.000000] RAMDISK: [mem 0x3663e000-0x37316fff]
[ 0.000000] ACPI: RSDP 00000000000f6b00 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee30c0 049B3 (v01 GBT GBTUACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: SSDT 00000000cfee7b40 00206 (v01 PTLTD POWERNOW 00000001
LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfee7d80 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7dc0 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee7a80 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16fffffff]
[ 0.000000] NODE_DATA [mem 0x16fffc000-0x16fffffff]
[ 0.000000] [ffffea0000000000-ffffea00051fffff] PMD ->
[ffff88016a600000-ffff88016edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x16fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
[ 0.000000] node 0: [mem 0x100000000-0x16fffffff]
[ 0.000000] On node 0 totalpages: 1310319
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11589 pages used for memmap
[ 0.000000] DMA32 zone: 835995 pages, LIFO batch:31
[ 0.000000] Normal zone: 6272 pages used for memmap
[ 0.000000] Normal zone: 452480 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88016fc00000 s84032 r8192
d22464 u524288
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1292396
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8-1-amd64
root=/dev/mapper/globus-root ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 5013784k/6029312k available (3629k kernel code, 788036k
absent, 227492k reserved, 3109k data, 616k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2104.653 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004051] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4209.30 BogoMIPS (lpj=8418612)
[ 0.004145] pid_max: default: 32768 minimum: 301
[ 0.004243] Security Framework initialized
[ 0.004294] AppArmor: AppArmor disabled by boot time parameter
[ 0.005192] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.011632] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015148] Mount-cache hash table entries: 256
[ 0.015457] Initializing cgroup subsys cpuacct
[ 0.015506] Initializing cgroup subsys memory
[ 0.015571] Initializing cgroup subsys devices
[ 0.015618] Initializing cgroup subsys freezer
[ 0.015666] Initializing cgroup subsys net_cls
[ 0.015713] Initializing cgroup subsys blkio
[ 0.015760] Initializing cgroup subsys perf_event
[ 0.016023] tseg: 00cff00000
[ 0.016026] CPU: Physical Processor ID: 0
[ 0.016072] CPU: Processor Core ID: 0
[ 0.016119] mce: CPU supports 5 MCE banks
[ 0.016171] LVT offset 0 assigned for vector 0xf9
[ 0.016222] process: using AMD E400 aware idle routine
[ 0.016270] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.016270] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.016270] tlb_flushall_shift: 4
[ 0.016430] Freeing SMP alternatives: 12k freed
[ 0.016795] ACPI: Core revision 20121018
[ 0.024745] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067046] smpboot: CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350
(fam: 0f, model: 6b, stepping: 01)
[ 0.068000] Performance Events: AMD PMU driver.
[ 0.068000] ... version: 0
[ 0.068000] ... bit width: 48
[ 0.068000] ... generic registers: 4
[ 0.068000] ... value mask: 0000ffffffffffff
[ 0.068000] ... max period: 00007fffffffffff
[ 0.068000] ... fixed-purpose events: 0
[ 0.068000] ... event mask: 000000000000000f
[ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.068000] smpboot: Booting Node 0, Processors #1
[ 0.152111] Brought up 2 CPUs
[ 0.152202] smpboot: Total of 2 processors activated (8418.86 BogoMIPS)
[ 0.152898] devtmpfs: initialized
[ 0.157810] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff]
(12288 bytes)
[ 0.157810] regulator-dummy: no parameters
[ 0.157810] NET: Registered protocol family 16
[ 0.157810] node 0 link 0: io port [d000, ffff]
[ 0.157810] TOM: 00000000d0000000 aka 3328M
[ 0.157810] node 0 link 0: mmio [a0000, bffff]
[ 0.157810] node 0 link 0: mmio [d0000000, fe02ffff]
[ 0.157810] node 0 link 0: mmio [e0000000, efffffff]
[ 0.157810] TOM2: 0000000170000000 aka 5888M
[ 0.157810] bus: [bus 00-02] on node 0 link 0
[ 0.157810] bus: 00 [io 0x0000-0xffff]
[ 0.157810] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.157810] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.157810] bus: 00 [mem 0x170000000-0xfcffffffff]
[ 0.157810] ACPI: bus type pci registered
[ 0.157810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157810] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.175726] PCI: Using configuration type 1 for base access
[ 0.176871] bio: create slab <bio-0> at 0
[ 0.176871] ACPI: Added _OSI(Module Device)
[ 0.176871] ACPI: Added _OSI(Processor Device)
[ 0.176871] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176871] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.177135] ACPI: EC: Look up EC in DSDT
[ 0.178151] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.184225] ACPI: Interpreter enabled
[ 0.184278] ACPI: (supports S0 S1 S4 S5)
[ 0.184507] ACPI: Using IOAPIC for interrupt routing
[ 0.192433] ACPI: No dock devices found.
[ 0.192488] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.192632] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.192681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193133] PCI host bridge to bus 0000:00
[ 0.193183] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.193232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.193280] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.193329] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.193377] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.193426] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[ 0.193483] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.193519] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.193555] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.193598] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
[ 0.193618] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.193630] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.193641] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.193653] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.193664] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.193676] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.193734] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.193750] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.193825] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.193841] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.193917] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.193933] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.194010] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.194026] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.194102] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.194117] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.194199] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.194221] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.194312] pci 0000:00:13.5: supports D1 D2
[ 0.194315] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.194344] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.194369] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.194463] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.194479] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.194491] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.194502] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.194514] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.194525] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.194572] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.194596] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.194670] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.194691] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.194776] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.194832] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.194857] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.194879] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.194901] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.194968] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000
[ 0.194985] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.194998] pci 0000:01:00.0: reg 18: [mem 0xfdf80000-0xfdfbffff 64bit]
[ 0.195008] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 0.195024] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.195070] pci 0000:01:00.0: supports D1 D2
[ 0.195074] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.195110] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.195126] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.195203] pci 0000:01:00.1: supports D1 D2
[ 0.200018] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.200068] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.200072] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.200077] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.200134] pci 0000:02:0f.0: [10ec:8167] type 00 class 0x020000
[ 0.200158] pci 0000:02:0f.0: reg 10: [io 0xde00-0xdeff]
[ 0.200172] pci 0000:02:0f.0: reg 14: [mem 0xfdeff000-0xfdeff0ff]
[ 0.200229] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.200268] pci 0000:02:0f.0: supports D1 D2
[ 0.200271] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.200310] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.200361] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.200366] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.200372] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff
pref]
[ 0.200376] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.200379] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.200383] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.200386] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff]
(subtractive decode)
[ 0.200390] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff]
(subtractive decode)
[ 0.200465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.200600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.200671] pci0000:00: ACPI _OSC support notification failed, disabling
PCIe ASPM
[ 0.204005] pci0000:00: Unable to request _OSC control (_OSC support mask:
0x08)
[ 0.205550] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.206109] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.206666] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.208036] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.208591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.209149] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.209705] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.210264] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.210862] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210862] vgaarb: loaded
[ 0.210862] vgaarb: bridge control possible 0000:01:00.0
[ 0.210862] PCI: Using ACPI for IRQ routing
[ 0.220689] PCI: pci_cache_line_size set to 64 bytes
[ 0.220758] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.220761] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[ 0.220935] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.221187] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.223271] Switching to clocksource hpet
[ 0.223329] pnp: PnP ACPI init
[ 0.223329] ACPI: bus type pnp registered
[ 0.223329] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.223329] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.223377] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.223427] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223737] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because
it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.223795] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled]
because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.223883] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.223932] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.223981] system 00:01: [io 0x040b] has been reserved
[ 0.224053] system 00:01: [io 0x04d6] has been reserved
[ 0.224102] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.224151] system 00:01: [io 0x0c14] has been reserved
[ 0.224200] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.224249] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.224298] system 00:01: [io 0x0c6f] has been reserved
[ 0.224347] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.224396] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.224444] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.224494] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.224542] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.224592] system 00:01: [io 0x0b00-0x0b1f] could not be reserved
[ 0.224641] system 00:01: [io 0x0238-0x023f] has been reserved
[ 0.224691] system 00:01: [mem 0xfee00400-0xfee00fff window] has been
reserved
[ 0.224745] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224904] pnp 00:02: [dma 4]
[ 0.224942] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.225040] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.225113] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.225155] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.225207] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.225645] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.225963] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.226280] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.226495] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.226545] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226790] system 00:0b: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.226840] system 00:0b: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.226890] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.226939] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.226989] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.227039] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.227088] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.227137] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.227187] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.227237] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.227286] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.227336] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.227361] pnp: PnP ACPI: found 12 devices
[ 0.227408] ACPI: ACPI bus type pnp unregistered
[ 0.235631] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff
pref]
[ 0.235689] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.235738] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.235787] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.235836] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.235892] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff
pref]
[ 0.235944] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.235992] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.236057] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.236108] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff
pref]
[ 0.236176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.236179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.236182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.236186] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.236189] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.236193] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.236196] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.236199] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.236203] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.236206] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.236209] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.236212] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.236216] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.236219] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.236222] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.236226] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.236300] NET: Registered protocol family 2
[ 0.236678] TCP established hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.237495] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.238211] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.238383] TCP: reno registered
[ 0.238450] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.238603] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.238855] NET: Registered protocol family 1
[ 1.872096] pci 0000:01:00.0: Boot video device
[ 1.872106] PCI: CLS 4 bytes, default 64
[ 1.872170] Unpacking initramfs...
[ 2.247632] Freeing initrd memory: 13156k freed
[ 2.256189] PCI-DMA: Disabling AGP.
[ 2.256336] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 2.256384] PCI-DMA: using GART IOMMU.
[ 2.256433] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.262066] audit: initializing netlink socket (disabled)
[ 2.262136] type=2000 audit(1368033478.256:1): initialized
[ 2.280282] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.281120] VFS: Disk quotas dquot_6.5.2
[ 2.281200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.281363] msgmni has been set to 9947
[ 2.281765] alg: No test for stdrng (krng)
[ 2.281865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 2.281980] io scheduler noop registered
[ 2.282028] io scheduler deadline registered
[ 2.282091] io scheduler cfq registered (default)
[ 2.282287] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 2.282393] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.282466] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.282514] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.283075] GHES: HEST is not enabled!
[ 2.283209] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.303797] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.324400] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.324961] Linux agpgart interface v0.103
[ 2.325153] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.359247] i8042: Failed to disable AUX port, but continuing anyway... Is
this a SiS?
[ 2.359299] i8042: If AUX port is really absent please use the 'i8042.noaux'
option
[ 2.608113] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.608309] mousedev: PS/2 mouse device common for all mice
[ 2.608413] rtc_cmos 00:04: RTC can wake from S4
[ 2.608620] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.608704] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.608770] cpuidle: using governor ladder
[ 2.608817] cpuidle: using governor menu
[ 2.608903] drop_monitor: Initializing network drop monitor service
[ 2.609039] TCP: cubic registered
[ 2.609130] NET: Registered protocol family 10
[ 2.609420] mip6: Mobile IPv6
[ 2.609468] NET: Registered protocol family 17
[ 2.609849] PM: Hibernation image not present or could not be loaded.
[ 2.609864] registered taskstats version 1
[ 2.610667] rtc_cmos 00:04: setting system clock to 2013-05-08 17:17:59 UTC
(1368033479)
[ 2.612399] Freeing unused kernel memory: 616k freed
[ 2.612771] Write protecting the kernel read-only data: 6144k
[ 2.615145] Freeing unused kernel memory: 456k freed
[ 2.618098] Freeing unused kernel memory: 528k freed
[ 2.813717] udevd[61]: starting version 175
[ 2.843191] SCSI subsystem initialized
[ 2.847753] ACPI: bus type scsi registered
[ 2.854391] ACPI: bus type usb registered
[ 2.854481] usbcore: registered new interface driver usbfs
[ 2.854543] usbcore: registered new interface driver hub
[ 2.873140] libata version 3.00 loaded.
[ 2.873552] usbcore: registered new device driver usb
[ 2.875082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.875527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.875814] ehci-pci: EHCI PCI platform driver
[ 2.878795] scsi0 : pata_atiixp
[ 2.884716] scsi1 : pata_atiixp
[ 2.885266] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.885316] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.886363] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.886423] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 2.886523] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 2.898496] microcode: AMD CPU family 0xf not supported
[ 2.906639] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.906784] r8169 0000:02:0f.0 (unregistered net_device): not PCI Express
[ 2.907181] r8169 0000:02:0f.0 eth0: RTL8169sc/8110sc at 0xffffc90000c5c000,
00:1a:4d:83:4c:bf, XID 18000000 IRQ 23
[ 2.907236] r8169 0000:02:0f.0 eth0: jumbo features [frames: 7152 bytes, tx
checksumming: ok]
[ 2.944621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.944676] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.944729] usb usb1: Product: OHCI Host Controller
[ 2.944778] usb usb1: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
[ 2.944826] usb usb1: SerialNumber: 0000:00:13.0
[ 2.945359] hub 1-0:1.0: USB hub found
[ 2.945416] hub 1-0:1.0: 2 ports detected
[ 2.946026] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.946085] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[ 2.946547] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 3.004040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.004093] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.008246] usb usb2: Product: OHCI Host Controller
[ 3.008294] usb usb2: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
[ 3.008342] usb usb2: SerialNumber: 0000:00:13.1
[ 3.008572] hub 2-0:1.0: USB hub found
[ 3.008629] hub 2-0:1.0: 2 ports detected
[ 3.008864] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 3.008918] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[ 3.009015] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 3.068023] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.068072] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.068124] usb usb3: Product: OHCI Host Controller
[ 3.068172] usb usb3: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
[ 3.068219] usb usb3: SerialNumber: 0000:00:13.2
[ 3.068406] hub 3-0:1.0: USB hub found
[ 3.068461] hub 3-0:1.0: 2 ports detected
[ 3.068646] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 3.068699] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus
number 4
[ 3.068767] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 3.128022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.128072] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.128124] usb usb4: Product: OHCI Host Controller
[ 3.128171] usb usb4: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
[ 3.128219] usb usb4: SerialNumber: 0000:00:13.3
[ 3.128407] hub 4-0:1.0: USB hub found
[ 3.128462] hub 4-0:1.0: 2 ports detected
[ 3.128643] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 3.128696] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus
number 5
[ 3.128765] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 3.188021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.188070] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.188122] usb usb5: Product: OHCI Host Controller
[ 3.188170] usb usb5: Manufacturer: Linux 3.8-1-amd64 ohci_hcd
[ 3.188217] usb usb5: SerialNumber: 0000:00:13.4
[ 3.188418] hub 5-0:1.0: USB hub found
[ 3.188474] hub 5-0:1.0: 2 ports detected
[ 3.188663] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 3.188720] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus
number 6
[ 3.188781] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze
workaround
[ 3.188847] ehci-pci 0000:00:13.5: debug port 1
[ 3.188948] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 3.284028] usb 1-1: new low-speed USB device number 2 using ohci_hcd
[ 3.296031] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 3.296124] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.296173] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.296225] usb usb6: Product: EHCI Host Controller
[ 3.296273] usb usb6: Manufacturer: Linux 3.8-1-amd64 ehci_hcd
[ 3.296321] usb usb6: SerialNumber: 0000:00:13.5
[ 3.296554] hub 6-0:1.0: USB hub found
[ 3.296607] hub 6-0:1.0: 10 ports detected
[ 3.296928] ahci 0000:00:12.0: version 3.0
[ 3.297012] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.297185] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 3.297240] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum
part ccc
[ 3.298607] scsi2 : ahci
[ 3.298837] scsi3 : ahci
[ 3.299069] scsi4 : ahci
[ 3.299240] scsi5 : ahci
[ 3.299358] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100
irq 22
[ 3.299412] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180
irq 22
[ 3.299464] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200
irq 22
[ 3.299517] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280
irq 22
[ 3.352044] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.620041] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.788025] ata4: softreset failed (device not ready)
[ 3.788079] ata4: applying PMP SRST workaround and retrying
[ 3.788141] ata3: softreset failed (device not ready)
[ 3.788191] ata3: applying PMP SRST workaround and retrying
[ 3.792058] ata6: softreset failed (device not ready)
[ 3.792111] ata6: applying PMP SRST workaround and retrying
[ 3.800471] microcode: AMD CPU family 0xf not supported
[ 3.807838] device-mapper: uevent: version 1.0.3
[ 3.807986] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised:
dm-de...@redhat.com
[ 3.960040] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.960132] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.960863] ata4.00: ATA-8: WDC WD6400AAKS-65A7B2, 01.03B01, max UDMA/133
[ 3.960913] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 3.960967] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.961824] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.961872] ata4.00: configured for UDMA/133
[ 3.964031] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.964246] ata6.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66
[ 3.964296] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.964649] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.964697] ata6.00: configured for UDMA/66
[ 3.984474] ata3.00: HPA detected: current 625140335, native 625142448
[ 3.984611] ata3.00: ATA-7: WDC WD3200AAJS-00RYA0, 12.01B01, max UDMA/133
[ 3.984659] ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.984709] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.985520] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.985568] ata3.00: configured for UDMA/133
[ 3.985818] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0
PQ: 0 ANSI: 5
[ 3.986168] scsi 3:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0
PQ: 0 ANSI: 5
[ 3.987077] scsi 5:0:0:0: CD-ROM ASUS DRW-1814BLT 1.13
PQ: 0 ANSI: 5
[ 3.990125] sd 2:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298
GiB)
[ 3.990241] sd 2:0:0:0: [sda] Write Protect is off
[ 3.990290] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.990317] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.990811] sd 3:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640
GB/596 GiB)
[ 3.990936] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.990985] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.991011] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.995636] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.995761] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 3.995883] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 3.997878] sda: sda1 sda2 sda3
[ 3.998434] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.999407] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 3.999459] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.999919] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.006783] sdb: sdb1 sdb2
[ 4.008945] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.112043] usb 1-1: new low-speed USB device number 3 using ohci_hcd
[ 4.302055] usb 1-1: New USB device found, idVendor=09da, idProduct=0260
[ 4.302110] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.302159] usb 1-1: Product: USB Keyboard
[ 4.302206] usb 1-1: Manufacturer:
[ 4.339141] usbcore: registered new interface driver usbhid
[ 4.339194] usbhid: USB HID core driver
[ 4.342299] input: USB Keyboard as
/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input0
[ 4.342444] hid-generic 0003:09DA:0260.0001: input,hidraw0: USB HID v1.10
Keyboard [ USB Keyboard] on usb-0000:00:13.0-1/input0
[ 4.347139] input: USB Keyboard as
/devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input1
[ 4.347266] hid-generic 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10
Device [ USB Keyboard] on usb-0000:00:13.0-1/input1
[ 4.440025] usb 1-2: new low-speed USB device number 4 using ohci_hcd
[ 4.607052] usb 1-2: New USB device found, idVendor=05e3, idProduct=1205
[ 4.607105] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.607154] usb 1-2: Product: USB Mouse
[ 4.614394] input: USB Mouse as
/devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2
[ 4.614586] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10
Mouse [USB Mouse ] on usb-0000:00:13.0-2/input0
[ 34.043228] uhci_hcd: USB Universal Host Controller Interface driver
[ 90.701171] bio: create slab <bio-1> at 1
[ 93.573169] PM: Starting manual resume from disk
[ 93.573227] PM: Hibernation image partition 254:1 present
[ 93.573229] PM: Looking for hibernation image.
[ 93.573479] PM: Image not found (code -22)
[ 93.573484] PM: Hibernation image not present or could not be loaded.
[ 93.578100] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 93.578107] PM: Marking nosave pages: [mem 0xcfee0000-0xffffffff]
[ 93.579328] PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
[ 93.579626] PM: Basic memory bitmaps created
[ 93.616515] PM: Basic memory bitmaps freed
[ 93.623225] REISERFS (device dm-0): found reiserfs format "3.6" with
standard journal
[ 93.623294] REISERFS (device dm-0): using ordered data mode
[ 93.623340] reiserfs: using flush barriers
[ 93.640477] REISERFS (device dm-0): journal params: device dm-0, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 93.641822] REISERFS (device dm-0): checking transaction log (dm-0)
[ 93.677155] REISERFS (device dm-0): Using r5 hash to sort names
[ 96.087072] udevd[718]: starting version 175
[ 98.176688] microcode: AMD CPU family 0xf not supported
[ 98.180443] microcode: AMD CPU family 0xf not supported
[ 98.516656] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 98.552712] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 98.552843] ACPI: Power Button [PWRB]
[ 98.552995] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 98.553177] ACPI: Power Button [PWRF]
[ 98.653594] parport_pc 00:09: reported by Plug and Play ACPI
[ 98.653706] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 98.682658] kvm: Nested Virtualization enabled
[ 98.743890] EDAC MC: Ver: 3.0.0
[ 98.745366] MCE: In-kernel MCE decoding enabled.
[ 98.746987] AMD64 EDAC driver v3.4.0
[ 98.747105] EDAC amd64: DRAM ECC disabled.
[ 98.747166] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 98.747166] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 98.747166] (Note that use of the override may cause unknown side effects.)
[ 98.770036] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 98.837160] powernow-k8: fid 0xd (2100 MHz), vid 0xc
[ 98.837213] powernow-k8: fid 0xc (2000 MHz), vid 0xd
[ 98.837261] powernow-k8: fid 0xa (1800 MHz), vid 0xf
[ 98.837309] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 98.837408] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor
BE-2350 (2 cpu cores) (version 2.20.00)
[ 98.997664] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 98.997791] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at
0xb10
[ 99.053956] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 99.054181] sp5100_tco: PCI Revision ID: 0x14
[ 99.054260] sp5100_tco: failed to find MMIO address, giving up.
[ 99.528919] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 99.528993] Disabling lock debugging due to kernel taint
[ 99.574733] <6>[fglrx] Maximum main memory to use for locked dma buffers:
4795 MBytes.
[ 99.575253] <6>[fglrx] vendor: 1002 device: 683f count: 1
[ 99.576105] <6>[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 99.576575] <6>[fglrx] Kernel PAT support is enabled
[ 99.576687] <6>[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1
minors
[ 99.727218] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input6
[ 99.741732] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 99.742161] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 99.742583] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 99.742971] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 99.743352] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 99.743718] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 99.744156] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 99.744563] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 99.747493] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 99.747556] hda-intel 0000:01:00.1: Force to non-snoop mode
[ 99.747769] snd_hda_intel 0000:01:00.1: irq 41 for MSI/MSI-X
[ 99.880296] input: HDA ATI HDMI HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 99.880970] input: HDA ATI HDMI HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 99.881303] input: HDA ATI HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 99.881632] input: HDA ATI HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[ 99.881988] input: HDA ATI HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
[ 99.882279] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
[ 101.933157] reiserfs: enabling write barrier flush mode
[ 102.919288] fuse init (API version 7.20)
[ 103.015439] loop: module loaded
[ 103.207312] cfg80211: Calling CRDA to update world regulatory domain
[ 103.384090] it87: Found IT8716F chip at 0x228, revision 0
[ 103.384172] it87: Beeping is supported
[ 104.490075] Adding 1048572k swap on /dev/mapper/globus-swap. Priority:-1
extents:1 across:1048572k
[ 106.038253] REISERFS (device dm-3): found reiserfs format "3.6" with
standard journal
[ 106.038350] REISERFS (device dm-3): using ordered data mode
[ 106.038404] reiserfs: using flush barriers
[ 106.038921] REISERFS (device dm-3): journal params: device dm-3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 106.041441] REISERFS (device dm-3): checking transaction log (dm-3)
[ 106.109546] REISERFS (device dm-3): Using r5 hash to sort names
[ 106.136849] REISERFS (device dm-4): found reiserfs format "3.6" with
standard journal
[ 106.136940] REISERFS (device dm-4): using ordered data mode
[ 106.136993] reiserfs: using flush barriers
[ 106.137522] REISERFS (device dm-4): journal params: device dm-4, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 106.140064] REISERFS (device dm-4): checking transaction log (dm-4)
[ 106.197088] REISERFS (device dm-4): Using r5 hash to sort names
[ 106.239725] REISERFS (device dm-5): found reiserfs format "3.6" with
standard journal
[ 106.244042] REISERFS (device dm-5): using ordered data mode
[ 106.244096] reiserfs: using flush barriers
[ 106.247019] REISERFS (device dm-5): journal params: device dm-5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 106.249590] REISERFS (device dm-5): checking transaction log (dm-5)
[ 106.301517] REISERFS (device dm-5): Using r5 hash to sort names
[ 106.325093] REISERFS (device dm-2): found reiserfs format "3.6" with
standard journal
[ 106.325213] REISERFS (device dm-2): using ordered data mode
[ 106.325266] reiserfs: using flush barriers
[ 106.325944] REISERFS (device dm-2): journal params: device dm-2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 106.328542] REISERFS (device dm-2): checking transaction log (dm-2)
[ 106.426482] REISERFS (device dm-2): Using r5 hash to sort names
[ 107.975181] Bridge firewalling registered
[ 107.992397] device eth0 entered promiscuous mode
[ 108.032847] r8169 0000:02:0f.0 eth0: link down
[ 108.032922] r8169 0000:02:0f.0 eth0: link down
[ 108.033037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 108.038506] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 109.621776] r8169 0000:02:0f.0 eth0: link up
[ 109.621853] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 109.622560] br0: port 1(eth0) entered forwarding state
[ 109.622622] br0: port 1(eth0) entered forwarding state
[ 109.622707] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 110.111823] PPP generic driver version 2.4.2
[ 110.611618] NET: Registered protocol family 24
[ 111.551784] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 112.644221] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
--- End Message ---