On 27. jan 2006, at 1.38, Charles Plessy wrote:
On Thu, Jan 26, 2006 at 03:40:02PM +0100, Brian Durant wrote :
Here is what my yaboot conf file looks like:
## For a dual-boot menu, add one or more of:
## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ
Maybe you could look for a way to have
Using a B&W G3 with a spanish keyboard running Sarge. Which way to do
it running X? Will it work the same if using Gnome?
Cordially, Ismael
--
Tout fourmille de commentaries, d'auteurs il en est grande chert?
http://lamediahostia.blogspot.com/
http://www.flickr.com/photos/ivalladt/
p
On 27. jan 2006, at 8.59, Christian Walther wrote:
If you have specific questions after reading the manual, just ask
them. It'll be easier for all of us to give you an answer when we know
what you're dealing with. :-)
Hi,
Well here is the first batch, all pertaining to the Debian Sarge PPC
On Fri, Jan 27, 2006 at 11:44:04AM +0100, Brian Durant wrote :
>
> 1) Which option "install-*" do I use to start an install for the
> following:
Hi,
What options can you chose ? any finishing by 4 or 64 should be fine.
> You shouldn't have to be a guru to get a plain vanilla Debian
> syste
On Sun, 2006-01-29 at 01:23 -0300, Marcos Medeiros wrote:
> cold:~# iwconfig eth2 essid any
> Error for wireless request "Set ESSID" (8B1A) :
> SET failed on device eth2 ; Operation not supported.
> cold:~#
When you modprobe the module, the radio is turned off by default. To
turn it on, use i
On 27. jan 2006, at 12.15, Charles Plessy wrote:
On Fri, Jan 27, 2006 at 11:44:04AM +0100, Brian Durant wrote :
1) Which option "install-*" do I use to start an install for the
following:
Hi,
What options can you chose ? any finishing by 4 or 64 should be fine.
Noted.
You shouldn't have
> You are right that the CDROM seems to be recognized by the kernel
> according to the logs, but I can't mount any CDs because there doesn't
> seem to be a /dev/hdc.
>
> How do I get one of those without rebooting?
That depends - with neither udev nor devfsd running, mknod /dev/hdc b 22 0
would be
On Thu, 2006-01-26 at 16:44 +0100, Rainer Gutkas wrote:
> Have you checked the date settings recently? So I had this problem once
> on my G3 Powerbook Pismo under Ubuntu-Hoary. After this sudden
> power-lost everything seemed scrambled, which made no sense to me,
> because I'm using ext3 and che
On Friday 27 January 2006 18:01, Michel Dänzer wrote:
> About a week ago, I switched from pmud to pbbuttonsd, and today I had a
> sudden shutdown again, on AC and with mostly full battery. Note that I
> don't mean to blame pbbuttonsd, I'm pleasantly surprised by how it's
> come along since the last
> If I'm on battery I've ended up stopping pbbuttonsd if I'm doing something
> critical - not had a shutdown if I have not had pbbuttonsd running... Maybe I
> should go pmud instead then... Hmm.
You can compile pbbuttonsd to run in cooperatve mode with pmud (a
configure option). Maybe this can hel
On 1/27/06, Ian Ruffell <[EMAIL PROTECTED]> wrote:
> On Friday 27 January 2006 18:01, Michel Dänzer wrote:
> > About a week ago, I switched from pmud to pbbuttonsd, and today I had a
> > sudden shutdown again, on AC and with mostly full battery. Note that I
> > don't mean to blame pbbuttonsd, ...
>
Michel Dänzer <[EMAIL PROTECTED]> wrote:
Hi,
> FWIW, I used to have regular sudden shutdowns a couple of months ago.
As a data point, I'm seeing that too on a rev1 Ti (G4 500), but it
might be a slightly different issue.
It happened today for the second time in a couple of months, the
machine j
I also see this on my old TiBook G4/400. There is one bad thing I do
have to avoid:
if I forget to unplug a PCMCIA-CF card adapter with a CF card, and
close the lid for sleeping
it will immediately be "dead", i.e. like forced power off.
On restart I get a nice date of Jan 1st 1900 :-) it forc
Rainer Gutkas wrote:
Hello all!
I'm thinking of tuning my Powerbook G3 Pismo a bit and thought to by
myself a DVD-writer to replace the original DVD-ROM. Theres plenty of
them on ebay
As I can order this only from overseas (US) and thats quite expensive,
and I don't think I can return them,
Hi,
I tried to build the bcm43xx driver from the debian package with a
self-made kernel, but I failed.
Firstly I needed the header files for ieee80211softmac. After building
and installing the package I found the include files in
/usr/src/linux-headers-2.6.15.1. The bcm43xx make file searches for
15 matches
Mail list logo
