hi all,
i've taken out the hard disk from my old ibook g3 and i'd like to be able to
read it from my new macbook (amd64).
is this possible ?
thanks in advance
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Monday 09 July 2007 18:19:44 Lawrence Li wrote:
Your MacBook runs on AMD64? How could that be possible?
macbook has a core2duo
# dpkg-architecture
DEB_BUILD_ARCH=amd64
DEB_BUILD_ARCH_OS=linux
DEB_BUILD_ARCH_CPU=amd64
DEB_BUILD_GNU_CPU=x86_64
DEB_BUILD_GNU_SYSTEM=linux-gnu
On Sunday 11 June 2006 12:13, Michel Dänzer wrote:
No, because you haven't provided any information about the symptoms of
the problem.
well, last try foobillard and ppracer didn't work (sofware acceleration), but
now seems to work :-? (hardare acceleration ok)
thru self-compiled icculus
On Sunday 11 June 2006 13:41, Michel Dänzer wrote:
Does
LD_PRELOAD=/usr/lib/libGL.so.1 ioquake3
work? If not, look at the output of
LIBGL_DEBUG=verbose ioquake3 /dev/null
yes, thanks.
sorry for the noise.
pgpiOKL65XcEH.pgp
Description: PGP signature
hi all
i've reinstalled a daily-build iso image of etch for powerpc on mi ibook2.2.
i expected to get dri out of the box but i was wrong, i can't get any opengl
game working fine.
do you know what's missing ?
this is my config:
debian kernel 2.6.16-2-powerpc
xorg 7.0.20
On Monday 03 April 2006 18:54, Brad Boyer wrote:
Well, I didn't look hard enough when I answered your question before. I
didn't realize there were two different cards with similar names. The
one I thought you had uses a normal chipset supported by the hermes
driver and might have worked with
On Sunday 02 April 2006 23:13, Wojciech Owczarek wrote:
The airport driver is actually a
kind of a wrapper for orinoco driver, so the wrapper thing might be
your case. As I said, I'm no hw expert, but it probably works the way I
wrote.
i've compiled the acx100-source and i've loaded them but
hi all
i've trimmed a dlink 650+ so now fits in the original airport classic pcmcia
slot. i've tried the card on some windozes and linux x86 boxes and seems to
work.
but on my ibook doesn't work: lspci and dmesg doesn't show anything.
should i have pcmcia compiled in the kernel ? is there
On Wednesday 11 January 2006 22:49, Cedric Pradalier wrote:
I'd like to know if there is still people using this module,
using it here
if these users would like to see this module included an
official kernel,
definitely yes
if, knowing that lm_sensors should be able to read this
chip,
hi all
i've problems with alsa in my ibook2.2 since i upgraded to 2.6.14.2. i can't
listen anything after a wakeup. this is the mplayer output:
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource
busy
alsa-init: 1 soundcard found, using: default
ALSA lib
hi all,
i've downloaded[0] the patch for monitor mode (with kismet) for 0.15rc2
(included in linux 2.6.14) but doesn't apply cleanly and doesn't compile.
anyone can point me to a working patch ?
thanks :)
[0] http://kismetwireless.net/code/orinoco-0.15rc2-dragorn-02.diff
--
To UNSUBSCRIBE,
hi all,
what's the status of this bug ?
http://bugzilla.ubuntu.com/show_bug.cgi?id=1940
is ben's patch merged with 2.6.14 ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Monday 31 October 2005 22:57, Ian Wienand wrote:
Has anyone else noticed boot failures with 2.6.14? I'm using
2.6.14-git from just a few minutes ago. Get to the 'openpic: exit'
before jumping to the kernel and then nothing.
works here
[EMAIL PROTECTED]:~$ uname -a
Linux guffy 2.6.14 #1
On Sunday 23 October 2005 12:00, kohzak wrote:
i'm running osx Panther and Debian etch on my ibook 12 G4.
I would like to know if it will be a problem to install Tiger.
Will it erase my dual boot ?
yes
Will i have to reinstall my Debian ?
no
thanks for any information about that.
just
On Sunday 23 October 2005 12:21, kohzak wrote:
hum, sorry but how i do that ? Just being root and go to /mnt/mypartition
?
mount -t xxx /dev/hdaX /mnt/foo
chroot /mnt/foo
ybin -v
instead the last two instructions you can also do
ybin -v -c /mnt/foo/etc/yaboot.conf
15 matches
Mail list logo