How do I configure a SPARC 5 to give a different MAC Address to the two
NICs? I have set the local-mac-address? to true and it did not work. It was
set to false before and did not work. What am I missing?
David Demland
On Mon, 22 Sep 2003 21:33:23 -0700
David Demland [EMAIL PROTECTED] wrote:
How do I configure a SPARC 5 to give a different MAC Address to the two
NICs? I have set the local-mac-address? to true and it did not work. It was
set to false before and did not work. What am I missing?
Use 'ifconfig'
On Mon, 22 Sep 2003 20:26:34 -0400
Steve Pacenka [EMAIL PROTECTED] wrote:
So what's a Wintel user doing reading debian-sparc? It's time to stop
reading and trade in that hardware and dying OS for something like a U10
or U60 with Linux ..
Hi there Steve,
I already have a Ultra 10 box, but
On Mon, 22 Sep 2003 20:26:34 -0400
Steve Pacenka [EMAIL PROTECTED] wrote:
Fellow Sparcers,
I've gotten about 70 virus/worms today of the current Wintel variety.
My Sparcs w/Debian are quite immune, fortunately.
One of the messages seems legit, from a filter than identified the
senders
I'm wanting to setup SMP on a dual ross hypersparc ss20
with 2.4 or 2.6 kernel to be able to use iptables, etc.
(SOHO firewall/router/web server)
Because I'm familiar with debian (have had on my dev 386 box
for a long time) I went with debian install. I'm cross posting
because debian/gentoo are
I've gone to the 'these kernels work' page and
it would appear that a 2.4.23-pre5 would work in
SMP mode on my dual ROSS Hypersparcs ss20, but it
still goes out to lunch during the boot up
sequence. (512M RAM)
I've gotten my vmlinux size down to 2,365,108
but am not sure that I'm not running
On Tuesday 23 Sep 2003 20:04, Heitzso wrote:
I've gone to the 'these kernels work' page and
it would appear that a 2.4.23-pre5 would work in
SMP mode on my dual ROSS Hypersparcs ss20, but it
still goes out to lunch during the boot up
sequence. (512M RAM)
Perhaps you could describe what
now, with framebuffer and console turned off, ...
boot went much, much further, but not to completion
so I'm not clear if I'm just decreasing kernel size
and hence changing where/when the boot crashes
or if I really needed to turn the console option
off
NOTES
ethernet drivers failed to find
final note re last attempt to get 2.4.23-pre5
working on dual hypersparc ss20 with smp
enabled
I'm going to turn off the ss20 for now and
continue to monitor these lists. I'll
try another kernel farther down the line.
Otherwise, if someone knows the ins and outs
of the kernel size limitation
I have a SPARC 5 with Dual NICs. One is built-in the other is an added SBUS
card. One NIC is set to a 10.0.0.2 address and the other is set 192.168.1.8.
I have placed this computer into my network which has both networks. I can
ping out the 10.0.0.2 interface and it works. I can not ping out the
On Thu, Sep 18, 2003 at 11:49:14AM -0400, Ben Pitzer wrote:
Folks,
I have a Sun Ultra 1 that is in need of an ssh upgrade for security reasons.
Currently running Sarge, so I grabbed the Sid package, however it's telling
me I need libc6-2.3.2 or better (I currently have 2.3.1). Where I can
11 matches
Mail list logo
