Mark Morgan Lloyd wrote:
Around a year ago I acquired a number of SPARCserver 1000E machines,
[snip]
I have not made similar progress with a scratch-compiled 2.4 kernel.
[snip]
I put rather a lot of work into this a while back and my patches are in
2.4.30, there are still some outstanding is
From: Mark Morgan Lloyd <[EMAIL PROTECTED]>
Date: Wed, 20 Jul 2005 22:50:42 +
> In arch/sparc/kernel/sun4d_smp.c there is a call to
> calibrate_delay(): this should be commented out. As far as I can
> tell (and I stress that I am neither a Sun guru nor a kernel hacker)
> it is only used for th
I'm afraid this is rather old news, but I plead that I've been waiting for Sarge
for the last year rather than reporting the situation with Woody which was
obsolescent. Also for various reasons my ML gateway has been inoperative and
this work is fairly low on my list of priorities.
Around a year a
On Wed, 2005-07-20 at 13:31 +0200, Admar Schoonen wrote:
> On Tue, Jul 19, 2005 at 01:23:44PM +0200, Peter wrote:
> > Hi, what kind of USB card were you using in your Ultra 5? I tried a card
> > with a viao chipset that I had lying around, but the machine wouldn't
> > even boot up with that.
>
> I
From: [EMAIL PROTECTED]
Date: Wed, 20 Jul 2005 14:27:55 +0200
> I've seen on ML that the DRI hardware acceleration for the Elite 3D has
> been marked broken.
The Elite 3D never had DRI acceleration supported on it.
Only Creator3D did, and that got disabled because it was
nearly impossible to add
On 7/20/05, Turbo Fredriksson <[EMAIL PROTECTED]> wrote:
> I usually do this via TFTP, but this time I don't want to do this
> for various reasons, so does anyone have the program to do the
> actuall writing of the OBP?
>
> I already extracted the actuall flash image from the OBP patch
> (retreive
Title: Message
Hi
Frederic,
That
is the "stop" key (left hand side of the keyboard on the 5c) and the "a"
key.
If you
do this when the box is initialising you will get the PROM prompt "ok" and if
you do it when you see SILO, you will be at the "boot"
prompt.
The
"ok" prompt allows y
One thing to be aware of. The lights out management on Sun servers is
not provided by the Compaq stuff. Different Sun models have differing
versions of lights out management: some have it built into the
motherboard; others have separate cards to install; and the top end
stuff often has something a
On Wed, Jul 20, 2005 at 03:00:27PM +0200, Turbo Fredriksson wrote:
> Quoting Jon Biddell <[EMAIL PROTECTED]>:
>
> >
> > Not exactly sure of the origin, but I used to use it in a Compaq server
> > farm
> > and it is a great idea, especially for remote / adsl connections.
> >
> > After all, workig
Quoting Jon Biddell <[EMAIL PROTECTED]>:
> On Wed, 20 Jul 2005 20:34, Turbo Fredriksson wrote:
>> Quoting Dave Love <[EMAIL PROTECTED]>:
>> > Yes, when the v210 was frozen, I had to reset it via the lights-out
>> > management system.
>>
>> The 'lights-out management system'? Is that a Solaris thin
I've seen on ML that the DRI hardware acceleration for the Elite 3D has
been marked broken.
Is there any hope to revive this piece of code ?
Seb
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I usually do this via TFTP, but this time I don't want to do this
for various reasons, so does anyone have the program to do the
actuall writing of the OBP?
I already extracted the actuall flash image from the OBP patch
(retreived from Sun) using the command in the message
http://lists.debian.org/
Hi,
I tried for a few weeks to make my U60 2x300mhz with 1.5gb of ram to
boot with 2.6.12 and 2.6.12.x.
Unfortunately, if the kernel seems to boot ok, I got a kernel panic when
doing a iptables load active.
Inserting the connection tracking module provokes an unrecoverable
kernel panic.
The 2.6
On Tue, Jul 19, 2005 at 01:23:44PM +0200, Peter wrote:
> Hi, what kind of USB card were you using in your Ultra 5? I tried a card
> with a viao chipset that I had lying around, but the machine wouldn't
> even boot up with that.
I don't remember any details except that it's a 4 port USB 2.0 card (4
On Wed, 20 Jul 2005 20:34, Turbo Fredriksson wrote:
> Quoting Dave Love <[EMAIL PROTECTED]>:
> > Yes, when the v210 was frozen, I had to reset it via the lights-out
> > management system.
>
> The 'lights-out management system'? Is that a Solaris thing?
It's a Compaq-originated thing - an interface
Title: Re: Press L1-A to return to the boot prom
"Press L1-A to return to the boot prom"
> > What key sequence is this? I have a Type 5 keyboard.
--
Quoting Dave Love <[EMAIL PROTECTED]>:
> Yes, when the v210 was frozen, I had to reset it via the lights-out
> management system.
The 'lights-out management system'? Is that a Solaris thing?
--
FBI KGB counter-intelligence NORAD Rule Psix nuclear Panama Ft. Meade
cryptographic cracking Legion of
Quoting Dave Love <[EMAIL PROTECTED]>:
> Yes, when the v210 was frozen, I had to reset it via the lights-out
> management system.
The 'lights-out management system'? Is that a Solaris thingie?
--
NSA ammunition Ortega Legion of Doom Saddam Hussein Kennedy Waco,
Texas explosion plutonium cryptogr
Title: Message
I'm having the same
DBD::mysql install issue: /mysql.so: undefined symbol:
compress
But I'm having it on
a PC; it seems to be to do with the lack of compression libraries, and is
covered in the INSTALL.html included with the bundle or viewable on CPAN, in the
'other files'
19 matches
Mail list logo